Table of Contents
Advertisement
2. Push the "SELECT" button to con-
firm the selected shift light activity.
The control mode changes to the
shift light activation point setting
function.
To set the shift light activation point
TIP
The shift light activation point can be
set between 10000 r/min and 18000
r/min. From 10000 r/min to 13000
r/min, the shift light can be set in incre-
ments of 500 r/min. From 13000 r/min
to 18000 r/min, the shift light can be set
in increments of 200 r/min.
1. Push the "RESET" button to set
the activation point engine speed.
2. Push the "SELECT" button to con-
firm the setting. The control mode
changes to the shift light deactiva-
tion point setting function.
To set the shift light deactivation point
TIP
The deactivation range is the same as
the activation range. However, be sure
to set the deactivation point to a higher
Instrument and control functions
engine speed than the activation point,
otherwise the shift light will not come
on.
1. Push the "RESET" button to set
the deactivation point engine
speed.
2. Push the "SELECT" button to con-
firm the setting. The control mode
changes to the shift light bright-
ness function.
To adjust the shift light brightness
1. Push the "RESET" button to set
the shift light brightness level.
2. Push the "SELECT" button to con-
firm the setting and exit the dis-
play brightness and shift light
control mode.
4-16
Clutch lever
1
1. Clutch lever
The clutch lever is located on the left
side of the handlebar. To disengage
the clutch, pull the lever toward the
handlebar grip. To engage the clutch,
release the lever. The lever should be
pulled rapidly and released slowly for
smooth clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
4-30.)
EAU12822
4
Advertisement
Table of Contents
Troubleshooting
