Removing And Replacing The Cisco Asr 1006 Router Power Supplies - Cisco ASR 1000 Series Replacing
Removing and replacing frus from the routers
Hide thumbs
Also See for ASR 1000 Series:
- Software configuration manual (602 pages) ,
- Configuration manual (442 pages) ,
- Common criteria operational user guidance and preparative procedures (72 pages)
Table of Contents
Advertisement
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Step 3
Disconnect all cables from the shared port adapter.
Step 4
Unscrew the captive installation screws on either side of the SPA.
Step 5
Grasp the handles and pull the SPA from the SIP.
What to do next
You have completed the removal procedure for the Cisco ASR 1000 Series SPA.
Replacing a Shared Port Adapter in a SIP
To replace a shared port adapter in a SIP module, follow these steps:
SUMMARY STEPS
1. To insert the SPA in the SIP, locate the guide rails inside the SIP that hold the SPA in place. They are at
the top left and top right of the SPA slot and are recessed about an inch.
2. Carefully slide the SPA all the way in the SIP until the SPA is firmly seated in the SPA interface connector.
When fully seated, the SPA might be slightly behind the SIP faceplate.
3. After the SPA is properly seated, fasten the SPA in place with the captive installation screws on either
side of the SPA.
DETAILED STEPS
Step 1
To insert the SPA in the SIP, locate the guide rails inside the SIP that hold the SPA in place. They are at the top left and
top right of the SPA slot and are recessed about an inch.
Step 2
Carefully slide the SPA all the way in the SIP until the SPA is firmly seated in the SPA interface connector. When fully
seated, the SPA might be slightly behind the SIP faceplate.
Step 3
After the SPA is properly seated, fasten the SPA in place with the captive installation screws on either side of the SPA.
Removing and Replacing the Cisco ASR 1006 Router Power
Supplies
The Cisco ASR 1006 Router contains power supplies that are field replaceable units. This section contains
the following topics:
Removing and Replacing a AC Power Supply in Cisco ASR 1006 Router
This section provides information about removing and replacing an AC power supply in the Cisco ASR 1006
Router.
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Replacing a Shared Port Adapter in a SIP
57
Hide quick links:
Advertisement
Table of Contents
