Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Siemens LR96CAQ20
Summary of Contents for Siemens LR96CAQ20
- Page 1 Ceiling-mounted ventilation system LR96CAQ20, LR96CAQ50, LR96CAQ50B User manual and assembly instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
en Safety The appliance can only be used safely if it is Table of contents correctly installed according to the safety in- structions. The installer is responsible for en- Safety ................ 2 suring that the appliance works perfectly at its Preventing material damage ........ - Page 3 Safety en heaters or water heaters) obtain combus- ▶ Clean the grease filters regularly. tion air from the room in which they are ▶ Never work with naked flames close to installed and discharge the exhaust gases the appliance (e.g. flambéing). into the open through an exhaust gas sys- ▶...
-
Page 4: Preventing Material Damage
en Preventing material damage ▶ Take hold of the filter cover after open- ▶ Call Customer Service. → Page 14 ing until it no longer swings out. ▶ Repairs to the appliance should only ▶ Close the filter cover slowly. be carried out by trained specialist ¡... -
Page 5: Environmental Protection And Saving Energy
Environmental protection and saving energy en ¡ Condensation that flows back in may damage the Clean or replace the filters at regular intervals. appliance. The effectiveness of the appliance is increased. The air extraction duct must be installed with a ▶ gradient of at least 1°... -
Page 6: Before Using For The First Time
en Before using for the first time Setting an operating mode Your appliance is set to air extraction mode by default. To use it in circulating-air mode, you must set the oper- ating mode. Note: For use in circulating-air mode, you require addi- tional Accessories → Page 14. - Page 7 Basic operation en Press repeatedly until LED 5 lights up in the LED Sensor control display for intensive mode 2. In automatic mode, a sensor in the appliance detects a After approx. 6 minutes, the appliance automatically the intensity of the cooking and roasting fumes. De- switches to fan setting 3.
-
Page 8: Hob-Based Hood Control
en Hob-based hood control You have the following options for connecting the Switching on the lighting appliances with each other: Press to switch on the lighting. ¡ Connecting the appliance via the Home Connect ▶ app. If both appliances are Home Connect-compat- Note: Colour temperature settings are available in the ible, they can be connected using the Home Con- Home Connect app provided the appliance has this nect app. - Page 9 Home Connect en ¡ Automatically connecting appliance to WLAN home LED display. Log the appliance manually into the home network or press in order to restart the lo- network (Wi-Fi) → Page 9 ¡ Connecting appliance to WLAN home network (Wi- gin. Fi) manually → Page 9 On your mobile device, follow the instructions for The Home Connect app guides you through the entire automatic network login.
-
Page 10: Cleaning And Servicing
Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found www.home-connect.com online at www.siemens-home.bsh-group.com among the additional documents on the product page for your Data protection appliance. Please see the information on data protection. - Page 11 Cleaning and servicing en ¡ Risk of falling when working on the appliance Cleaning the stainless steel surfaces Observe the information regarding the cleaning agents. → "Cleaning products", Page 10 Clean using a sponge cloth and hot soapy water in the direction of the finish. Dry with a soft cloth.
- Page 12 en Cleaning and servicing ATTENTION! Falling grease filters may damage the WARNING ‒ Risk of fire! hob below. Fatty deposits in the grease filters may catch fire. Grip below the grease filter with one hand. ▶ Clean the grease filters regularly. ▶ Open the locks on the grease filters. Requirement: The grease filters have been removed.
-
Page 13: Troubleshooting
Troubleshooting en Remove the empty batteries. Close the cover. Dispose of the empty batteries in an environmentally friendly manner. Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs. WARNING ‒ Risk of injury! Improper repairs are dangerous. -
Page 14: Customer Service
en Customer Service accessories Order number Customer Service CleanAir recirculation LZ21JXC21 module, flat with easy- If you have any queries on use, are unable to rectify change filter (can be re- faults on the appliance yourself or if your appliance generated), white needs to be repaired, contact Customer Service. -
Page 15: Installation Instructions
Installation instructions en Installation instructions ≥ 200 Included with the appliance After unpacking all parts, check for any damage in transit and completeness of the delivery. ≥300 ≥1000 ≥ 1300 ≥ 650 Dimensions You will find the dimensions of the appliance here Safety clearances Secure installation Comply with the safety clearances for the appliance. - Page 16 en Installation instructions Toxic gases from the flue or the extraction shaft are ¡ The appliance is heavy. sucked back into the living space. To move the appliance, two people are required. ▶ Use only suitable tools and equipment. ▶ ¡ The appliance is heavy. The appliance must not be fitted directly onto ▶...
- Page 17 Installation instructions en The protective conductor system of the domestic If this is not possible, an all-pole isolating switch ▶ ▶ electrical installation must be properly installed. must be integrated into the permanent electrical Never equip the appliance with an external installation according to the conditions of over- ▶...
- Page 18 en Installation instructions Saw a cut-out into the ceiling. Insert the appliance into the cut-out until you hear the mounting brackets engage. ±1 ±1 16 – 50 ±1 1188 ±1 16 – 50 Remove any shavings. Carefully screw in diagonally opposite screws. Preparing the appliance Remove the grease filters.
- Page 19 Installation instructions en Press together the cable duct at the sides and re- Undo the opposite screws to loosen the fan box. move it. T 20 Push the fan box to the side and connect the appli- Disconnect the cable at the appropriate point. ance to the power supply.
- Page 20 en Installation instructions Undo the screw on the metal hook. Turning the air outlet to the back Starting with the delivery condition, turn the fan box clockwise so that the air outlet is pointing to the back. Insert the extension cable. Hook the cable into the cable guides 1 and 2.
- Page 21 Installation instructions en Press together the cable duct at the sides and at- Mount the filter cover on the designated screws and tach. push it backwards/forwards depending on the key hole opening into the narrow section. Fit the cover frame and screw it firmly in place. Tighten the fastening screws on the hinges.
- Page 22 en Installation instructions Press together the cable duct at the sides and re- Removing the appliance move it. WARNING ‒ Risk of injury! ¡ The appliance is heavy. To move the appliance, two people are required. ▶ Use only suitable tools and equipment. ▶ ¡...
- Page 23 Installation instructions en Push the fan box to the side and release the pipe- Loosen the mounting brackets on the appliance us- work. ing a screwdriver. Push the fan box to the other side and pull out the Slowly take the appliance out of the cutout. mains plug.
- Page 24 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under Trademark License of Siemens AG *9001482216* 9001482216 (991115)