Advertisement
Quick Links
Please assist with battery recycling
This product is equipped with a built-in recyclable
lithium battery. When discarding this product, please
following the instructions noted below to remove the
lithium-ion battery.
DANGER
[Built-in rechargeable lithium-ion battery]
Please follow the instructions noted. Failure to
do so may cause the built-in lithium-ion battery
to leak, overheat, ignite, or rupture.
・ Do not dispose of the device in fire or expose it to
heat.
・ Do not attempt to disassemble the battery or alter it in
any way.
・ Do not throw the device, strike it with a hammer or
other object, or drive nails into it.
・ Do not use or leave the device in places where it will
be exposed to high temperatures, such as near a
stove or inside a closed automobile.
・ In the event that the built-in lithium-ion battery leaks
fluid and the fluid contacts your eyes, do not rub them,
but rinse with copious amounts of clean water and
seek immediate medical treatment. Your eyes may be
seriously harmed by exposure to such battery fluid.
・ Do not allow the battery to be immersed in fresh or
sea water, or become otherwise wet.
・ Do not attempt to connect the device directly to an AC
electrical outlet, or the cigar lighter of an automobile.
・ Do not attempt to use the device's lithium-ion battery
to power any other device.
・ Do not handle a lithium-ion battery that is leaking. If
leaking battery fluid contacts your skin, wash quickly
with copious amounts of water.
WARNING
[Built-in rechargeable lithium-ion battery]
・ Do not place the device in a microwave oven or
expose it to high pressure, since the device may
overheat, rupture, or ignite.
・ Do not place a leaking rechargeable lithium-ion battery
near a source of heat or fire, since the battery could
overheat, rupture, or ignite.
CAUTION
[Built-in rechargeable lithium-ion battery]
・ Do not dispose of the device in fire or water, since the
rechargeable lithium-ion battery could rupture or leak
battery fluid, resulting in fire or personal injury.
・ To prevent accidents, store the lithium-ion battery out
of the reach of young children. In the event the battery
is swallowed, seek medical attention immediately.
・ If fluid leaking from a rechargeable lithium-ion battery
contacts your skin or clothes, wash immediately with
copious amounts of clean water. If left unattended, a
skin rash could result.
Removing the battery
Preparation
This procedure requires the tools listed below.
Be sure to assemble the necessary items before
beginning.
・ Ordinary flat-head (−) screwdriver
・ Ordinary Phillips(+) screwdriver
・ Precision (glasses) Phillips (+) screwdriver
・ Wire cutters (or scissors)
CAUTION
・ The instructions provided here to "assist with battery
recycling" are meant to allow the device's built-in
rechargeable lithium-ion battery to be removed at the
end of the device's service life, before final device
disposal. The device's warranty is invalidated the
moment the device is opened.
・ In order to avoid short circuits, remove the battery only
after confirming that the battery's storage capacity has
been fully depleted. Even when the power no longer
turns on, some residual current remains in the battery.
It is recommended to remove the lithium-ion battery
only after leaving the device with the power turned
on for several days, to assure that the battery is fully
depleted.
WARNING
・ Disconnect the AC adapter before performing these
procedures.
・ Do not contact the touch sensor while performing
these procedures.
・ In the event that the power is turned on while
performing these procedures, turn off the power and
then begin the procedures again.
ENGLISH
Advertisement
Related Manuals for Pioneer A3
Summary of Contents for Pioneer A3
- Page 1 ENGLISH Please assist with battery recycling This product is equipped with a built-in recyclable CAUTION lithium battery. When discarding this product, please [Built-in rechargeable lithium-ion battery] following the instructions noted below to remove the ・ Do not dispose of the device in fire or water, since the lithium-ion battery.
- Page 2 Removing the built-in battery (XW-SMA3 only) 1 Insert the ordinary flat-head (−) screwdriver into 7 Remove the 4 screws around the battery case the gap between the speaker grille and grille to remove the battery and battery case. frame, and press the grille outward to release it. The speaker grille is press-fitted into the grille frame.