Cisco Catalyst 9600 Installation Manual page 13

Hide thumbs Also See for Catalyst 9600:

Table of Contents

Installing the Switch

• Number 1 and Number 2 Phillips screwdrivers

• 3/16-inch flat-blade screwdriver

• Tape measure and level

Procedure

Step 1

Position the support flange of the left shelf bracket on the front of the left rail. Align and secure the bracket

to the rack by using three screws. Use either 10-32 or 12-24 pan head screws from the shelf kit.

Step 2

Position the support flange of the right shelf bracket on the front of the right rail — make sure that it is level

with the left shelf bracket. Align and secure the bracket to the rack by using three screws.

Use the same type of screws for the left and right shelf bracket.

Figure 10: Installing the Shelf Brackets

Pan head screws from the shelf kit to secure

the shelf brackets to the rack posts

Installing the Shelf Brackets and the Crossbar

Shelf brackets

Installing the Switch

Table of Contents