Pioneer BDP-120 System Firmware Update Instructions
Hide thumbs
Also See for BDP-120:
- Service manual (116 pages) ,
- Operating instructions manual (107 pages) ,
- Mode d'emploi (63 pages)
Advertisement
Quick Links
System Firmware Update Instructions using a USB memory device
NOTE:
- If you have any difficulty carrying out these instructions, please first refer to the System Firmware Update FAQ
included in this document and/or contact Pioneer Customer Support Center.
A. Check the current firmware version of the home theater system:
Using the home theater system's remote control:
1. Press the "STANDBY/ON" button to switch the unit on.
2. Press the "SETUP" button to display the "Initial Setup".
3. Select "Options" and press the "ENTER" button.
4. Select "System information" and press the "ENTER" button.
6. Select "Next Screen" and press the "ENTER" button
7. The firmware version of your home theater system will be displayed on the TV screen.
If the version number is
If the version number is less than V36.36, it is necessary to update the firmware. Please continue to section B.
B. Download the system firmware ZIP file from Pioneer's website:
1. Download the file named "SBX_N500_N700_V36.36.zip" from the website to a folder on your computer.
C. Preparing a USB memory device for the System Firmware Update:
1. Have your USB memory device ready
Requirements of your USB memory device:
- USB specification 2.0.
- 128 MB or more in capacity.
- Should not contain any files.
2. Connect your USB memory device to your computer.
3. Double click the downloaded ZIP file "SBX_N500_N700_V36.36.zip" to open it.
4. Unzip it and save the files named "SBXN700_MCU.bin", "SBXN700_V00.36.bin", and
"DLdiscidentifier_MCU.txt".
to a folder on your computer.
5. Copy the all of files to your USB memory device.
6. Confirm the file name and the file size are correct on your USB memory device:
To check the file size in Microsoft Windows, select the file, press the right mouse button, and select "Properties".
If the file name and size do not match the ones listed below, perform sections B and C again.
SBXN700_MCU.bin
SBXN700_V00.36.bin
V36.36
or higher, it is not necessary to update the firmware.
30.0Kbyte (30,744byte)
70.5Mbyte (74,006,528byte)
Advertisement
Related Manuals for Pioneer BDP-120
Summary of Contents for Pioneer BDP-120
- Page 1 - If you have any difficulty carrying out these instructions, please first refer to the System Firmware Update FAQ included in this document and/or contact Pioneer Customer Support Center. A. Check the current firmware version of the home theater system: Using the home theater system's remote control: 1.
- Page 2 8. Wait for both the update and reboot processes. * When the system firmware is successfully updated, a message “Update has completed successfully!” is displayed on your TV and “PIONEER” will be displayed on the front panel display of your home theater system during the reboot process.
- Page 3 A: Power on the home theater system and try again starting at section D. If the home theater system does not start up, the home theater system will need repairs. In such an event, call Pioneer Customer Support Center. Q: What do I do if the “MPEG UPG” or “MCU UPG” message does not appear on the front panel display as described in step 8 of section D? A: There could be a problem with the update USB memory device you created.