hit counter script
Huawei TP48200A-HT19C4-1 Installation Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Network Hardware
  5. TP48200A-HT19C4-1
  6. Installation manual
Huawei TP48200A-HT19C4-1 Installation Manual

Huawei TP48200A-HT19C4-1 Installation Manual

Hide thumbs Also See for TP48200A-HT19C4-1:
Table of Contents

Advertisement

Quick Links

Download this manual
TP48200A-HT19C4-1 & TBC300A-TCA2
V100R005
Installation Guide
Issue
01
Date
2014-03-12
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading

Related Manuals for Huawei TP48200A-HT19C4-1

Summary of Contents for Huawei TP48200A-HT19C4-1

  • Page 1 TP48200A-HT19C4-1 & TBC300A-TCA2 V100R005 Installation Guide Issue Date 2014-03-12 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...

  • Page 3: About This Document

    Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICEis used to address practices not related to personal injury. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 4 Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues. Issue 01 (2014-03-12) This issue is the first official release. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 5: Table Of Contents

    3.5.2 (Optional) Temperature and Humidity Sensor ......................29 3.5.3 (Optional) Water Sensor ............................30 3.5.4 Battery Temperature Sensor ............................. 30 3.5.5 Temperature Sensor in the Equipment Compartment ....................30 Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 6 7.2.2 NetEco Management ............................... 51 7.2.3 Third-Party NMS Management (over SNMP) ......................52 7.2.4 Connecting to Huawei BBU (over Dry Contacts, M2000 Management) ..............53 7.2.5 Installing a Communications Cable Between the Power Cabinet and the Battery Cabinet ........55 7.3 Installing DC Output Power Cables ..........................
  • Page 7 10.8 Connecting the Battery Supply ..........................80 10.9 Follow-up Operations ............................... 81 A Associations Between Alarms and Dry Contacts on the UIM .......... 82 B Acronyms and Abbreviations ....................83 Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 8: Safety

    When operating Huawei equipment, in addition to following the general precautions in this document, follow the specific safety instructions given by Huawei.  Only trained and qualified personnel are allowed to install, operate, and maintain Huawei equipment.  This product should be used in the environment that meets design specifications.
  • Page 9 Only qualified professional personnel are allowed to install, configure, operate, and disassemble the device.  Only the personnel authenticated or authorized by Huawei are allowed to replace or change the device of the parts of the device (including the software). Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright ©...

  • Page 10: Electrical Safety

    Only qualified personnel are allowed to perform high voltage and AC operations. Before powering on a device, ground the device. Otherwise, personal injury or device damage may be caused by high leakage current. Tools Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 11: Inflammable Environment

    Electrolyte overflow may damage the device. It will corrode metal parts and circuit boards, and ultimately damage the device and cause short circuit of circuit boards. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 12 Keep away metal objects, which may cause battery short circuit, from batteries. If metal objects must be used, first disconnect the batteries in use before performing any other operations. Hazardous Gas Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 13: Working At Heights

    1.1.5 Working at Heights Avoid object falling when you work at heights. When working at heights, fulfill the following requirements:  Only trained personnel can work at heights. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 14 Issue orders with short and explicit words to avoid misoperations.  Ensure that the angle formed by two cables is not larger than 90 degrees. See Figure 1-1. Figure 1-1 Hoisting heavy objects Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 15: Mechanical Safety

    Ensure that the scraps caused by drilling do not enter the cabinet.  Drilling holes without complying with the requirements affects the electromagnetic shielding performance of the cabinet.  After drilling, clean the metal scraps immediately. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 16: Bundling Signal Cables

    Do not bundle signal cables with high current cables or high voltage cables.  Maintain a minimum space of 150 mm between adjacent ties. 1.2 Equipment Safety 1.2.1 Electricity Safety High Electrical Leakage Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 17: Electrostatic Discharge

    Do not touch the vent or cover the vent with cables or other objects.  To prevent electric shocks, do not put your hands into rectifier slots. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 18: Installation Preparations

    TP48200A-HT19C4-1 & TBC300A-TCA2 Installation Guide 2 Installation Preparations Installation Preparations 2.1 Required Tools Figure 2-1 lists the tools that are required for the installation. Use tools with insulated handles. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 19 TP48200A-HT19C4-1 & TBC300A-TCA2 Installation Guide 2 Installation Preparations Figure 2-1 Installation tools Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 20: Technical Specifications

    ≤ 2 kg Rectifier R4850G2 40.8 mm x 105 mm x 281 mm ≤ 1.8 kg R4830G2 2.3 Installation Dimensions Figure 2-2 shows the required installation dimensions. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 21 TP48200A-HT19C4-1 & TBC300A-TCA2 Installation Guide 2 Installation Preparations Figure 2-2 Cabinet installation dimensions Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 22: Requirements For Cable Routing

    AC power cables, DC power cables, signal cables, and communications cables must be bound separately.  Power cables must be routed straight. No joints or welding should be performed on power cables. Use a longer cable if necessary. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 23: Components

    TP48200A-HT19C4-1 & TBC300A-TCA2 Installation Guide 3 Components Components 3.1 Interior Figure 3-1 shows the TP48200A-HT19C4-1 interior. Figure 3-2 shows the TBC300A-TCA2 interior. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 24 (12) Space for installing installing batteries customer equipment (13) Negative battery terminal (14) Positive battery (15) Space for installing terminal rectifiers (16) UIM (17) SMU (18) DC PDU Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 25: Rectifier

    (1) Space for installing batteries (2) Battery rack (3) Package entry module (4) TEC (5) TCUA control box (6) Ground bar 3.2 Rectifier Rectifiers convert AC input into stable DC output. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 26 The communication between the rectifier and at 0.5 Hz the SMU is interrupted. Fault indicator The rectifier is running properly. Steady on The rectifier locks out due to output overvoltage. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 27: Smu02B

    SMU02B. Figure 3-4 SMU02B appearance Panel Figure 3-5 shows an SMU02B panel. Figure 3-5 SMU02B panel (1) Run indicator (2) Minor alarm indicator (3) Major alarm indicator Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 28 Turns to the next menu or sets parameter values. When setting parameter values, you can hold down quickly adjust values. Back Returns to the previous menu without saving the settings. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 29 Figure 3-6 Pins in the FE port and RS485/RS232 port Table 3-5 Pin definitions for the FE port Signal Description Sends data over FE. Receives data over FE. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 30: Uim02C

    (including one ambient temperature and humidity input, two ambient temperature inputs, and one battery temperature input). Figure 3-7 shows a UIM02C panel. Figure 3-7 UIM02C panel Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 31 NOTE ports For the associations between the dry contact output ALM2 ports and alarms, see the appendix. ALM3 ALM4 ALM5 ALM6 ALM7 ALM8 Communications port RS485 port Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 32 Sends data over RS485. PGND Connects to the ground. 3, 7, 8 None Pins Figure 3-9 shows the pin numbers of the sensor ports. Table 3-10 defines the pins. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 33 Pin Definitions TEM-HUM 12 V ENV_TEMP 12 V ENV_HUM WATER 12 V WATER Not defined TEMP1 TEMP1 TEMP2 TEMP2 GATE GATE+ GATE- SMOKE SMOKE 12 V BTEMP BTEMP Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 34: Sensor

    TP48200A-HT19C4-1 & TBC300A-TCA2 Installation Guide 3 Components 3.5 Sensor Figure 3-10 shows the positions of all sensors in the TP48200A-HT19C4-1 Figure 3-10 Sensors (1) Temperature sensor in the (2) (Optional) Ambient (3) Door status equipment compartment temperature and humidity sensor...

  • Page 35: Optional) Smoke Sensor

    3.5.1 (Optional) Smoke Sensor Figure 3-11 Smoke sensor 1 (1) Wiring port (2) Base (3) Indicator Figure 3-12 Smoke sensor 2 (1) Wiring port (2) Base (3) Indicator Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 36: Optional) Temperature And Humidity Sensor

    TP48200A-HT19C4-1 & TBC300A-TCA2 Installation Guide 3 Components 3.5.2 (Optional) Temperature and Humidity Sensor Figure 3-13 Temperature and humidity sensor 1 Figure 3-14 Temperature and humidity sensor 2 Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 37: Optional) Water Sensor

    Figure 3-15 Water sensor 3.5.4 Battery Temperature Sensor Figure 3-16 Battery temperature sensor 3.5.5 Temperature Sensor in the Equipment Compartment Figure 3-16 shows the temperature sensor in the equipment compartment. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 38: Installing Cabinets

    Step 1 Check whether packing cases are intact. If a packing case is severely damaged or wet, identify the cause and report to the local Huawei office. The marking-off template is located on the interior of the cover of the cabinet packing case.
  • Page 39 TP48200A-HT19C4-1 & TBC300A-TCA2 Installation Guide 4 Installing Cabinets Figure 4-1 Removing the TP48200A-HT19C4-1 from the pallet (1) Pallet Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 40: Marking Hole Positions

    Procedure Step 1 Remove the top cover from the power cabinet packing box, and find the marking-off template on the cover interior, as shown in Figure 4-3. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 41 Step 3 After you mark mounting holes for the power cabinet, remove the cover from the battery cabinet packing box, and determine the battery cabinet mounting holes based on the battery cabinet marking-off template, as shown in Figure 4-5. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 42: Drilling Holes And Installing Expansion Sleeves

    Step 3 Partially tighten the expansion bolts. Step 4 Remove the bolts, spring washers, and flat washers. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 43: Hoisting And Installing The Power Cabinet

    Procedure Step 1 Remove the screws from the holes for mounting lifting eyes. Step 2 Install the lifting eyes, as shown in Figure 4-7. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 44 Figure 4-7 Installing lifting eyes Step 3 Bind ropes through the lifting eyes and then hoist the cabinet to an appropriate position, as shown in Figure 4-8. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 45 TP48200A-HT19C4-1 & TBC300A-TCA2 Installation Guide 4 Installing Cabinets Figure 4-8 Hoisting the cabinet Step 4 Remove the ropes and lifting eyes. Step 5 Reinstall the screws. ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 46: Securing The Power Cabinet

    Step 1 After you install the power cabinet, move the battery cabinet to the corresponding mounting holes. Step 2 Place the spring washers, flat washers, and expansion bolts into the mounting holes. Step 3 Tighten expansion bolts to secure the cabinet. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 47 TP48200A-HT19C4-1 & TBC300A-TCA2 Installation Guide 4 Installing Cabinets Figure 4-10 Installing a battery cabinet ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 48: Installing A Ground Cable

    Step 4 Secure one end of the equipotential ground cable to the power cabinet ground bar, and the other end to the battery cabinet ground bar, as shown in Figure 5-1. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 49 Installation Guide 5 Installing a Ground Cable Figure 5-1 Installing ground cables (1) Power cabinet ground bar (2) Site ground bar (3) Battery cabinet ground bar ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 50: Installing Components

    Step 3 Gently push a rectifier into its slot along the guide rail. Step 4 Push the handle upwards. Step 5 Push the locking latch towards the right to secure the handle. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 51: Optional) Installing A Smoke Sensor

    Ensure that the switch on the smoker sensor base faces the cabinet door. Step 3 Secure the smoke sensor to the base, as shown in Figure 6-2. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 52 Step 4 Connect one end of the signal cable to the smoke sensor and the other end to the SMOKE port on the UIM panel, as shown in Figure 6-3. Figure 6-3 Connecting the signal cable for the smoke sensor Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 53: Optional) Installing A Water Sensor

    Figure 6-4 Installing a water sensor Step 2 Connect the signal cable for the water sensor to the WATER port on the UIM panel, as shown Figure 6-5. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 54: Optional) Installing An Ambient Temperature And Humidity Sensor

    Step 2 Connect one end of the signal cable to the sensor and the other end to the TEM-HUM port on the UIM panel, as shown in Figure 6-6. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 55 Step 3 Locate the fastener for the ambient temperature and humidity sensor in the left of the cabinet. Step 4 Install the sensor onto the fastener, as shown in Figure 6-7. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 56 Number of screws varies as types of ambient temperature and humidity sensors differ. Install the screws as required. Step 5 Close the cover of the ambient temperature and humidity sensor. ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 57: Installing Cables

    Step 3 Put away the flat-head screwdriver and check that the signal cables are securely connected. Figure 7-1 Installing a dry contact signal cable (1) Contact plate (2) Dry contact port ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 58: Installing The Communications Cables

    Figure 7-3 Connecting a communications cable (over the FE port) (1) FE port ----End Networking Mode 2: over RS485 Port Step 1 Connect one end of the network cable to the RS485/RS232 port on the SMU. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 59: Third-Party Nms Management (Over Snmp)

    Step 1 Connect the FE port on the SMU by using a network cable, as shown in Figure 7-5. Figure 7-5 Connecting a communications cable (over SNMP) (1) FE port ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 60: Connecting To Huawei Bbu (Over Dry Contacts, M2000 Management)

    TP48200A-HT19C4-1 & TBC300A-TCA2 Installation Guide 7 Installing Cables 7.2.4 Connecting to Huawei BBU (over Dry Contacts, M2000 Management) Procedure Step 1 Alarm signals are sent over dry contacts. Connect the dry contact signal cable to the EXT-ALM port on the BBU, as shown in Figure 7-6.
  • Page 61 In the non-SRAN site based on the BSC6900, the scope is 0 to 15.  In the non-SRAN site based on the BSC6000, the scope is 1 to 16. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 62: Installing A Communications Cable Between The Power Cabinet And The Battery Cabinet

    Step 2 Connect one end of the communications cable to the COM.IN port on the battery cabinet TCUA. Step 3 Connect the other end of the communications cable to the COM.OUT port on the power cabinet TCUA, as shown in Figure 7-7. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 63: Installing Dc Output Power Cables

    Figure 7-7 Installing a communications cable between the power cabinet and the battery cabinet (1) Power cabinet TCUA (2) Battery cabinet TCUA ----End 7.3 Installing DC Output Power Cables Prerequisites Switch off all circuit breakers before installing power cables. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 64 Step 4 Secure the positive DC output power cable to the corresponding screw on the RTN+ busbar. Figure 7-8 Installing DC output power cables (1) DC load ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 65: Installing The Tcua Power Cable

    Step 4 Secure the positive terminal on the other end of the power cable to the corresponding screws on the RTN+ busbar, as shown in Figure 7-9. Figure 7-9 Installing the TCUA power cable ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 66: Installing Ac Input Power Cables

    Route L1 through hole A on the current transformer and L2 through hole B. Step 3 Secure the AC input power cables to corresponding AC input circuit breakers and terminal, as shown in Figure 7-10. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 67 Installation Guide 7 Installing Cables Figure 7-10 Installing cables for a 110 V AC dual-live wire system (L1, L2, N) (1) Alternating current distribution box (ACDB) ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 68: Installing A 110 V Ac Dual-Live Wire Input Power Cable (L1 And L2)

    Step 2 Route the L1 wire through hole A of the current transformer. Step 3 Secure the AC input power cable to AC input circuit breakers, as shown in Figure 7-11. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 69 TP48200A-HT19C4-1 & TBC300A-TCA2 Installation Guide 7 Installing Cables Figure 7-11 Installing a 110 V AC dual-live wire input power cable (1) ACDB ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 70 L1 wire to the position where the N wire was connected to the RCD. Figure 7-12 Changing cable connections for the maintenance socket Step 5 Reinstall the cover for the maintenance socket. ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 71: Installing Batteries

    Step 1 Remove screw caps from the position for installing antitheft baffle plate bases on the battery cabinet. Step 2 Install the antitheft baffle plate bases on the cabinet. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 72: Installing Battery Strings

    Ensure that batteries are from the same manufacturer and of the same model and have a close voltage. New and old batteries cannot be used together. Procedure Step 1 Install batteries into the battery compartment in the sequence shown in Figure 8-2. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 73: Installing Copper Bars Between Batteries

    Step 1 Remove the insulation cover from the batteries. Step 2 Install copper bars between batteries. Step 3 Reinstall the insulation covers onto the two batteries in the middle. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 74: Installing Battery Cables

    Step 2 Take off the positive battery cable from the right of the battery compartment, and connect the cable to the positive battery terminal. Step 3 Install insulation covers for leftmost and rightmost batteries. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 75 TP48200A-HT19C4-1 & TBC300A-TCA2 Installation Guide 8 Installing Batteries Figure 8-4 Installing battery cables Figure 8-5 Battery cables installed for the power cabinet ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 76 Step 2 Secure one end of the positive battery cable to the positive battery terminal on the power cabinet, and the other end to the positive terminal of the battery string in the battery cabinet. Figure 8-6 Installing battery cables Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 77: Optional) Installing Antitheft Baffle Plates For The Battery Cabinet

    Step 1 Install antitheft baffle plates on the antitheft baffle plate bases for the battery cabinet, as shown in Figure 8-7. Figure 8-7 Installing an antitheft baffle plate ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 78: Verifying The Installation

    Check that all cables are arranged neatly and bound properly to their nearest cable ties, and are not twisted or overly bent.  Check that cable labels are properly and securely attached in the same direction. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 79: Commissioning

    Step 4 Measure the voltage between the -48 V busbar and the RTN+ busbar. The value should range from -42 V DC to -58 V DC. ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 80: Setting The Display Language

    SMU time and the site network server time. 10.4 Setting Battery Parameters Set the Battery1 Connected, Battery2 Connected, Rated Capacity and Installation Time as required. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 81: Setting Sensor Parameters

    Capacity to 300 Ah. 10.5 Setting Sensor Parameters Set the sensor parameter to Yes or None based on actual sensor configurations. Table 10-3 shows the LCD menus and parameter settings. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 82: Optional) Setting Hibernation Parameters

    Set Hibernation Enable to Yes if you need to enable the intelligent hibernation function of the rectifiers. Table 10-4 Setting hibernation parameters Main Menu Second-Level Third-Level Default Value Setting Value Menu Menu Parameters Energy Saving Hibernation Settings Enable Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 83: Setting Communications Parameters

    Set this parameter according to Wizard Parameters the IP address assigned by the network administrator. Subnet Mask 255.255.255.0 Set this parameter according to the subnet mask provided by the network administrator. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 84 Parameters Comm. Serial Port Northbound Port Mode Manual Manual Settings Parameters Protocol M/S Protocol M/S Protocol Type M/S Protocol Northbound Baud Rate 9600 9600 Comm. Address ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 85: Setting Parameters Before Using The Snmp Management

    Set this parameter according to the subnet mask provided by the network administrator. Default Gateway 192.168.0.1 Set this parameter according to the gateway address provided by the network administrator. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 86 If the SNMP version is SNMPv3, set SNMP Version to SNMPv3 under SNMP, click Add under SNMPv3, and then set User Name, MD5 Password, and DES Password, as shown in Figure 10-3. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 87: Connecting The Battery Supply

    To avoid damage to batteries, switch on the battery circuit breaker only after correctly setting the battery parameters. Procedure Step 1 Switch off the AC input circuit breaker. Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 88: Follow-Up Operations

    Step 4 The paint on the cabinet exterior should be intact. If paint flakes off, repaint the area to avoid corrosion. Step 5 Lock the cabinet door and hand over the key to the administrator. Clean the site and leave. ----End Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 89: A Associations Between Alarms And Dry Contacts On The Uim

    AC surge protective device (SPD) faults or DC SPD faults ALM5 Battery or load fuse blown ALM6 Excessively high or low ambient and battery temperatures ALM7 Door status alarm ALM8 Fan faults Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 90: B Acronyms And Abbreviations

    Battery low voltage disconnection HTTPS Hypertext Transfer Protocol Secure LLVD Load low voltage disconnection Site monitoring unit SNMP Simple Network Management Protocol TCUA Temperature control unit A User interface module Issue 01 (2014-03-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

This manual is also suitable for:

Tbc300a-tca2

Table of Contents