Advertisement
Dell Networking
300 Series Access Points
Installation Guide
The Dell Networking 300 Series wireless access points
(W-AP304, W-AP305, W-IAP304 and W-IAP305) support
IEEE 802.11ac standards for high-performance WLAN, and
are equipped with two radios, which provide network access
and monitor the network simultaneously. These access points
deliver high-performance 802.11n
2.4 GHz and 802.11ac 5 GHz functionality, while also
supporting 802.11a/b/g wireless services. Multi-user Multiple-
in, Multiple-output (MU-MIMO) is enabled when operating
in 5GHz mode for optimal performance.
The W-AP304 and W-AP305 access points work in
conjunction with a Dell controller, while the W-IAP304 and
W-IAP305 access points can be configured using a built-in
virtual controller.
The 300 Series wireless access points provide the following
capabilities:
IEEE 802.11a/b/g/n/ac operation as a wireless access point
IEEE 802.11a/b/g/n/ac operation as a wireless air monitor
IEEE 802.11a/b/g/n/ac spectrum monitor
Compatible with IEEE 802.3at PoE+ and IEEE 802.3af
PoE
Centralized management configuration and upgrade
Integrated Bluetooth Low Energy (BLE) Radio
Package Contents
300 Series access point
9/16" and 15/16" Ceiling Rail Adapters
Dell Networking 300 Series Access Points Installation
Guide (printed version)
Dell Networking 300 Series Access Points Regulatory
Compliance and Safety Information Guide
Dell Networking W-Series Instant Quick Start Guide
(W-IAP304 and W-IAP305 only)
Dell Networking W-Series Instant Access Point Professional
Installation Guide Supplement (W-IAP304 only)
Rev01 |
November 2016
.
Note: Inform your supplier if there are any incorrect,
missing, or damaged parts. If possible, retain the
carton, including the original packing materials. Use
these materials to repack and return the unit to the
supplier if needed.
Software
The W-AP304 and W-AP305 access points require AOS 6.5.1
or higher. For additional information, refer to the AOS User
Guide and AOS Quick Start Guide.
The W-IAP304 and W-IAP305 access points require Instant
4.3.1 or higher. For additional information, refer to the
Instant User Guide and Instant Quick Start Guide.
CAUTION: Dell access points are classified as radio
transmission devices, and are subject to government
regulations of the host country. The network
administrator(s) is/are responsible for ensuring that
configuration and operation of this equipment is in
compliance with their country's regulations. For the
complete list of country-approved channels and
devices, refer to the
Downloadable Regulatory Table (DRT) Release Notes
at download.dell-pcw.com.
Hardware Overview
Figure 1 Status LEDs on AP Front (305 shown)
System Status
Radio Status
LEDs
The 300 Series access points have two LEDs that indicate the
system and radio status of the device. These two LEDs can be
configured via AOS (for W-AP304 and W-AP305) or Instant
(for W-IAP304 and W-IAP305) software for three separate
modes:
Normal mode (by default): See the following LED table.
Off mode: LEDs are off
Blink mode: Both LEDs blink green (synchronized)
Dell Networking W-Series
1
Advertisement
Table of Contents
Related Manuals for Dell 300 Series
Summary of Contents for Dell 300 Series
- Page 1 Dell Networking 300 Series Access Points Regulatory LEDs Compliance and Safety Information Guide The 300 Series access points have two LEDs that indicate the Dell Networking W-Series Instant Quick Start Guide system and radio status of the device. These two LEDs can be...
- Page 2 USB Port Green- One radio enabled in access mode The 300 Series is equipped with a USB port for connectivity Blinking with cellular modems and other USB client devices. When powered by an 802.3at PoE or DC power source, the USB port...
-
Page 3: Before You Begin
United States Access Point Pre-Installation Checklist configured to non-US model controllers will be in Before installing your 300 Series access points, ensure that violation of the FCC grant of equipment authorization. you have the following:... -
Page 4: Verifying Pre-Installation Connectivity
Locations tabs (see Figure You can mount the 300 Series access point on the ceiling or a Figure 4 Attaching the Ceiling Rail Adapter wall. Use the access point placement map generated by Dell VisualRF Plan software application to determine the proper installation location(s). -
Page 5: Verifying Post-Installation Connectivity
Documentation Website dell.com /support/manuals Copyright © Copyright 2016 Hewlett Packard Enterprise Development LP. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without notice. Connecting Required Cables Originated in the USA.