hit counter script
Sony TRINITRON KV-HA21M80 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. TV
  5. KV-HA21M80
  6. Service manual
Sony TRINITRON KV-HA21M80 Service Manual

Sony TRINITRON KV-HA21M80 Service Manual

Bg2t chassis
Hide thumbs Also See for TRINITRON KV-HA21M80:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Sony TRINITRON KV-HA21M80

Summary of Contents for Sony TRINITRON KV-HA21M80

  • Page 2 REVISION HISTORY BG2T CHASSIS MODEL 9-872-280-02 PART NO. : KV-HA21M80 KV-HA21N70 KV-HA21N80 SUFFIX DATE SUPP / CORR DESCRIPTION 2002/1 1st. Issue Rear Cover Assy Suffix Change (P. 61) 2002/6 Supp. -1...
  • Page 3 SERVICE MANUAL BG2T CHASSIS MODEL COMMANDER DEST. CHASSIS NO. MODEL COMMANDER DEST. CHASSIS NO. KV-HA21M80 RM-969 India SCC-U74C-A KV-HA21N70 RM-968 Philippines SCC-U76D-A KV-HA21N80 RM-968 Philippines SCC-U76C-A MUTING DISPLAY POWER VIDEO JUMP JUMP SOUND SOUND PROGR MODE MODE SPACE SOUND WAKE UP SLEEP AUTO ADD/...
  • Page 4 THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. OR CARBON PAINTED ON THE CRT, AFTER REMOVING THE REPLACE THESE COMPONENTS WITH SONY PARTS ANODE. WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. – 2 –...

  • Page 5: Table Of Contents

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 TABLE OF CONTENTS Section Title Page Section Title Page SELF DIAGNOSTIC FUNCTION ........4 5. DIAGRAMS 5-1. Block Diagram ............30 1. GENERAL ..............7 5-2. Circuit Boards Location .......... 32 5-3. Schematic Diagram ..........33 2. DISASSEMBLY (1) A Board Schematic Diagram ......

  • Page 6: Self Diagnostic Function

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 SELF DIAGNOSTIC FUNCTION The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER lamp will automati- cally begin to flash. The number of times the lamp flashes translates to a probable source of the problem. A definition of the STANDBY/ TIMER lamp flash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 7 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 2. DISPLAY OF STANDBY/TIMER LIGHT FLASH COUNT Diagnostic Item Flash Count* 2 times +B overcurrent/overvoltage 2 times Vertical deflection stopped 4 times 4 times * One flash count is not used for self-diagnostic. Lamp ON 0.3 sec. Lamp OFF 3 sec.
  • Page 8 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 5. HANDLING OF SELF-DIAGNOSTIC SCREEN DISPLAY Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen during repairs. When you have completed the repairs, clear the result display to “0”. Unless the result display is cleared to “0”, the self-diagnostic function will not be able to detect subsequent faults after completion of the repairs.

  • Page 9: General

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 The operating instruction mentioned here are partial abstracts from the Operating Instruction Manual. The page numbers of SECTION 1 GENERAL the Operating Instruction Manual remain as in the manual. WARNING Getting Started (KV-HA21N80/HA21N70) • Dangerously high voltages are present inside the TV. Step 1 •...
  • Page 10 TV. Remote control sensor. • Count the number of times the 1 (standby) indicator flashes. Press ! The 1 (standby) (main power) to turn off your TV. Contact your nearest Sony service Standby indicator. indicator on your TV center.
  • Page 11 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 Setting the timers Remote control (KV-HA21M80) (KV-HA21M80) You can turn on and off your TV by using the buttons respectively. Button Function Setting the Wake Up timer Turn off temporarily or – turn on the TV. Press until the desired period of time appears –...
  • Page 12 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 Presetting channels (continued) (KV-HA21M80) Presetting channels (KV-HA21M80) You can automatically preset up to 100 TV channels in numerical sequence To change the TV system setting from program number 1, or manually preset desired channels and channels If the picture or sound is abnormal when receiving programs through the 8 (antenna that cannot be preset automatically.
  • Page 13 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 Customizing the picture and sound (KV-HA21M80) You can customize the picture and sound by selecting the picture and sound modes or by adjusting its settings. You can change the sound effect by selecting the space sound mode. Selecting the picture mode Press PIC MODE to select the desired picture mode.
  • Page 15 Anode Button...

  • Page 16: Set-Up Adjustments

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 SECTION 3 SET-UP ADJUSTMENTS The following adjustments should be made when a complete Perform the adjustments in the following order : realignment is required or a new picture tube is installed. 1. Beam Landing These adjustments should be performed with rated power 2.

  • Page 17: Convergence

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 3-2. CONVERGENCE • Operation of V. Stat magnet If the V. Stat magnet is moved in the "a" and "b" arrows, the Preparation : red, green and blue dots move as shown below. • Before starting this adjustment, adjust the focus, horizontal size and vertical size.
  • Page 18 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 (2) Dynamic Convergence Adjustment Preparation: Before starting this adjustment, adjust the horizontal static convergence and the vertical static convergence Insert Correction Plate to DY Pocket (Left or Right) YCH Rotate YCH VOL on DY Rotate TLV VOL ON DY XCV Rotate XCV Adj core on DY ON DY: (3) Screen-corner Convergence...

  • Page 19: Focus Adjustment

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 3-3. FOCUS ADJUSTMENT 2.a) WHITE BALANCE ADJUSTMENT 1) Set to Service Mode (Refer Section 4-1: ADJUSTMENTS FOCUS adjustment should be completed before W/B adjustment. WITH COMMANDER). 1. Receive digital monoscope pattern. 2) Input white raster signal. 2. Set "Picture Mode" to "DYNAMIC". 3) Set 49 (ABL) and IF (VP2) service mode to 00.

  • Page 20: Circuit Adjustments

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 SECTION 4 CIRCUIT ADJUSTMENTS 4-1. ADJUSTMENT WITH COMMANDER e. OTHER FUNCTION VIA REMOTE COMMANDER 7, - All the data becomes the values in memory. Service adjustments to this model can be performed using the 8, - All user control goes to the standard state. supplied Remote Commander RM-968 and RM-969.
  • Page 21 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 – 19 –...
  • Page 22 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 – 20 –...
  • Page 23 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 – 21 –...
  • Page 24 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 – 22 –...
  • Page 25 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 ITEM INFORMATION (KV-HA21M80) No. 1E VP1 Item KV-HA21M80 Switch-on behaviour 1=Switch -on of picture via internal delay 0=Without delay 00(4) 1=Switch off in vertical overscan 0=Switch-off undefind 18(7) Service blanking 1= on 0= off 0B(7) RGB Blanking Mode 1 = wide blanking, 0 = normal blanking 02(7) Forced Color-on 1=no colour killer 0=normal colour killer function 1B(0)
  • Page 26 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 No. 4F OP2 XTAL SEL Item No NICAM US ST HDEV I V-Curve SECAM 2nd Lang. KV-HA21M80 No NICAM 1 = NICAM search is disable in any TV system, 0 = NICAM search operates US ST (Reserved for NTSC model) 1 V-Curve 1 = using common volume curve for every mode and every TV system (for monaural model)
  • Page 27 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 ITEM INFORMATION (KV-HA21N80/N70) No. 1E VP1 Item KV-HA21N70 KV-HA21N80 Switch-on behaviour 1=Switch -on of picture via internal delay 0=Without delay 00(4) 1=Switch off in vertical overscan 0=Switch-off undefind 18(7) Service blanking 1= on 0= off 0B(7) RGB Blanking Mode 1 = wide blanking, 0 = normal blanking 02(7) Forced Color-on 1=no colour killer 0=normal colour killer function 1B(0)
  • Page 28 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 No. 33 OP2 XTAL SEL Item No NICAM US ST HDEV I V-Curve SECAM 2nd Lang. KV-HA21N70 KV-HA21N80 No NICAM 1 = NICAM search is disable in any TV system, 0 = NICAM search operates (Multi Model Only) US ST (Reserved for NTSC model) 1 V-Curve...
  • Page 29 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 OPERATION GUIDE SERVICE MODE How to set up new NVM (or initialize already written one) (1) AC ON (2) Enter Service Mode - describing below how to enter (3) Push the commander button “5” and “0” sequentially (only set initial data into RAM, but not write them into NVM yet) (4) Push the commander button “2”...

  • Page 30: Picture Quality Adjustment

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 4-3. PICTURE QUALITY ADJUSTMENT 4-4. DEFLECTION ADJUSTMENT NORMAL MODE (50Hz) SUB COLOR ADJUSTMENT Set to Service mode. 1. Select Video. Input PAL color bar. Using the 1 and 4 button, select category GEO 2. Input a PAL color-bar. 3.

  • Page 31: Picture Distortion Adjustment

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 4-6. PICTURE DISTORTION ADJUSTMENT Item Number 00 – 08 HPS (H POSITION) HSZ (H SIZE) PAP (PIN AMPLITUDE) CPN (CORNER PIN) TLT (TILT) VSL (V SLOPE) VAP (VERTICAL AMPLITUDE) SCO (S CORRECTION) VPS (V SHIFT) – 29 –...

  • Page 32: Diagrams

    KV-HA21M80/HA21N70/HA21N80 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 RM-969 RM-968 SECTION 5 DIAGRAMS 5-1. BLOCK DIAGRAM POWER SUPPLY, DEFLECTION, AUDIO CV (RGB AMPLIFIER) Q405 AND VIDEO PROCESSING, J400 BUFFER VIDEO AUDIO/VIDEO INPUT/OUTPUT, MICROCOMPUTER Q404 Q712 Q706 MONITOR BUFFER L (MONO) R DRIVE R AMP Q403 VIDEO BUFFER...

  • Page 33: Circuit Boards Location

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 5-2. CIRCUIT BOARDS LOCATION CV BOARD A BOARD – 32 –...

  • Page 34: Schematic Diagram

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 5-3. SCHEMATIC DIAGRAM Note: • All capacitors are in µF unless otherwise noted. • All electrolytic capacitors are rated at 50V unless otherwise noted. • All resistors are in ohms. kΩ = 1000Ω, MΩ = 1000kΩ • Indication of resistance which does not have rating electrical power is as follows.

  • Page 35: A Board Schematic Diagram

    KV-HA21M80/HA21N70/HA21N80 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 RM-969 RM-968 (1) A Board Schematic Diagram VIF/YC/J AUDIO VIF/YC/J TO C BOARD CN703 TO A3 BOARD CN300 CN200 CN301 CN302 J200 JACK EAR PHONE JACK L200 D200 C113 DA204K C426 R438 C418 TP300 R102 TU100 R991 R225 JW020...

  • Page 36: Cv Board Schematic Diagram

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 (2) CV Board Schematic Diagram CN702 1P :TAB RGB AMPLIFIER L701 22UH 200V :EL0607 200V C704 0.022 C701 R703 400V 0.0047 FOCUS 100k 1/2W G1-1 J701 SOCKET CN701 R705 RV702 :S-MICRO 110M TO A BOARD G1-2 G1-3 CN500 10 9 8 R708...
  • Page 37 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 A Board ✼ Mark List KV-HA21N70 KV-HA21M80 KV-HA21N80 C018 2.2 6.3V C026 0.001 B:CHIP C027 0.001 B:CHIP C045 3.3 63V C102 0.1 25V F:CHIP C103 0.1 25V F:CHIP C104 0.1 25V F:CHIP C105 0.1 25V F:CHIP C111 39P :CHIP 0.01P 25V B:CHIP 39P :CHIP...
  • Page 38 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 A Board ✼ Mark List KV-HA21N70 KV-HA21M80 KV-HA21N80 CT365 T65B D100 MTS MA77 D331 UDZSTE-179-1B D332 UDZSTE-179-1B D333 UDZSTE-179-1B D402 NNCD9.1A-TI NNCD9.1A-TI D405 NNCD9.1A-TI NNCD9.1A-TI D408 UDZSTE-179-1B FB001 1.1UH 1.1UH FB800 1.1UH 1.1UH IC001 CXP85220A-083S CXP85224A-080S CXP85220A-083S IC101 TA7805S TA7805S...
  • Page 39 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 A Board ✼ Mark List CV Board ✼ Mark List KV-HA21N70 KV-HA21M80 KV-HA21N80 KV-HA21N70 KV-HA21M80 KV-HA21N80 R120 1.8K :CHIP R706 680 RN 680 0.25W R121 22K :CHIP R707 470 RN 470 0.25W R122 330K :CHIP Note: The parts indicated as "#" in this circuit diagram are R123 22K :CHIP not listed here, as they are not used for these models.

  • Page 40: Voltage Measurement

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 5-4. VOLTAGE MEASUREMENTS A BOARD VOLTAGE LIST Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] IC001 (4.6)[0] (0)[4.5] (3.8)[4.6] IC003 (0)[4.9] (0.2)[0.5] (3.3)[3.9] (2.8)[3.1] (2.7)[2.9] (2.8)[3.0] IC004 IC101 (0.9)[1.8] (2.7)[2.9] IC201 (2.7)[2.9] (0)[4.9] (4.9)[0] (0.8)[1.6] (4.8)[4.3] 0.64 (2)[4.8] (0.3)[1]...
  • Page 41 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 A BOARD VOLTAGE LIST Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] IC551 Q201 Q316 13.6 Q202 (6)[3.3] Q317 (0)[1.3] 13.7 (13)[13.4] Q203 (5.5)[5.2] Q318 IC601 (6.1)[5.8] (*)[159] Q204 21.4 Q319 (*)[7] 21.4 (8.2)[0.2] (*)[2] 20.7 IC602 (*)[118] Q205...
  • Page 42 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 A BOARD VOLTAGE LIST Pin No. Voltage[v] Q924 (5.5)[0] (6.1)[8.5] Q956 Q961 (1.9)[1.4] (9)[2.4] (2.5)[2.1] Q962 Q964 Q966 CV BOARD VOLTAGE LIST Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] J701 (110)[102] Q707 (105.6)[96] Q712 (112)[104] (7.8)[8.2] (103)[96] (102.5)[95]...

  • Page 43: Waveforms

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 5-5. WAVEFORMS A BOARD WAVEFORM NTSC3.58 PAL/NTSC 3.58 NTSC3.58 PAL/NTSC 3.58 5.84Vp-p 3.76Vp-p 4.96Vp-p 3.84Vp-p 4.08Vp-p 1.4Vp-p PAL/NTSC3.58 NTSC3.58 PAL/NTSC 3.58 PAL/NTSC3.58 1.2Vp-p 1.64Vp-p 1.2Vp-p 1.2Vp-p 1.12Vp-p 3.16Vp-p NTSC3.58 NTSC3.58 NTSC3.58 2.56Vp-p 3.2Vp-p 2.64Vp-p 3.2Vp-p 2.92Vp-p 416Vp-p NTSC3.58 PAL/NTSC 3.58 PAL/NTSC3.58...

  • Page 44: Printed Wiring Boards And Parts Location

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 5-6. PRINTED WIRING BOARDS AND PARTS LOCATION PRINTED WIRING BOARDS [RGB AMPLIFER] – CV Board – – 44 –...
  • Page 45 KV-HA21M80/HA21N70/HA21N80 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 RM-969 RM-968 PRINTED WIRING BOARDS [POWER SUPPLY,DEFLECTION, NOTE: AUDIO AND VIDEO PROCESSING, The circuit indicated at left contains high voltage of over AUDIO/VIDEO INPUT/OUTPUT AND SYSTEM CONTROLLER] 1220 Vp-p. Please pay attention when inspecting or re- pairing it to prevent an electric shock.

  • Page 46: Semiconductors

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 5-7. SEMICONDUCTORS DIODE CATHODE CATHODE ANODE ANODE (GRN) ANODE CATHODE CATHODE (GRN) ANODE ANODE D1NL20U RD5.6ESB2 RD2.2ES-B2 EGP20G SPB-25MVWF DA204K D3S6M-F NNCD8.2A-T1 RD5.1SB-T2 RD15ES-B1 ELIZ NNCD9.1A-T1 UDZSTE-179.1B S3L20UF4 EG01CV1 RU4AM-T3 1SS355TE-17 RD13SB2 HZS361-TE 1SS119-25 RD5.6SB-T1 GPO8D TRANSISTOR LETTER SIDE CATHODE ANODE...
  • Page 47 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 MARKING SIDE VIEW TOP VIEW Zig-zag In -line Package Small Outline L-Leaded Pin 6~99 Pin 8~98 TDA8844 AN5522 SBX3081-21 MM1319AFBE (7 PIN) TDA8843 NJM2903M (8 PIN) STR-F6707A SE-135N TA7805S – 48 –...

  • Page 48: Exploded Views

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 SECTION 6 EXPLODED VIEWS NOTE: • • Items marked " ∗ " are not stocked since Items with no part number and no The components identified by description are not stocked because they are seldom required for routine shading and mark ! are critical they are seldom required for routine ser vice.

  • Page 49: Electrical Parts List

    KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 The components identified by shading and mark ! are critical for safety. SECTION 7 Replace only with part number specified. ELECTRICAL PARTS LIST REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK • Items marked " ∗ " are not stocked since •...
  • Page 50 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK C121 1-162-927-11 CERAMIC CHIP 100PF 5.00% C226 1-125-805-91 ELECT 4.7UF...
  • Page 51 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK C321 1-125-805-91 ELECT 4.7UF 20.00% 50V C425 1-162-925-11 CERAMIC CHIP 68PF...
  • Page 52 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK C814 1-117-646-11 FILM 12000PF 3.00% 1.2KV D202 8-719-988-61 1SS355TE-17 C852...
  • Page 53 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK <CONNECTOR> JR034 1-216-295-91 SHORT 0 (KV-HA21M80) JR035 1-216-295-91 SHORT * 1-580-798-11...
  • Page 54 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK <TRANSISTOR> R008 1-216-065-91 RES-CHIP 4.7K 1/10W R009 1-216-037-00 RES-CHIP 1/10W...
  • Page 55 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R076 1-216-025-11 RES-CHIP 1/10W R203 1-216-061-91 RES-CHIP 3.3K 1/10W (KV-HA21N70/HA21N80)
  • Page 56 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R303 1-216-033-00 RES-CHIP 1/10W R356 1-216-061-91 RES-CHIP 3.3K 1/10W R304...
  • Page 57 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R427 1-216-051-00 RES-CHIP 1.2K 1/10W R612 1-249-420-11 CARBON 1.8K 1/4W...
  • Page 58 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. A CV REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK S006 1-692-431-21 SWITCH, TACTILE <#########> S600 ! 1-571-433-31 SWITCH, PUSH (AC POWER)
  • Page 59 KV-HA21M80/HA21N70/HA21N80 RM-969 RM-968 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R712 1-216-486-00 METAL OXIDE 8.2K ACCESSORIES AND PACKING MATERIALS R713 1-260-330-11 CARBON...
  • Page 60 SUBJECT : REAR COVER ASSY SUFFIX CHANGE SECTION 6. EXPLODED VIEWS 6-1. PICTURE TUBE AND CHASSIS (see page 49) REF. NO. PART NO. DESCRIPTION REMARK X-4039-650-2 COVER ASSY, REAR Sony Corporation Sony Technology Malaysia Sdn. Bhd. English 9-872-280-02  Visual Products 2002.6 – 61 –...

This manual is also suitable for:

Trinitron kv-ha21n70Trinitron kv-ha21n80Trinitron rm-968Trinitron rm-969

Table of Contents