hit counter script
Toro Recycler 22295 Operator's Manual
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Lawn Mower
  5. 22295
  6. Operator's manual

Toro Recycler 22295 Operator's Manual

21in heavy-duty rear bagger lawn mower
Hide thumbs Also See for Recycler 22295:
Table of Contents

Advertisement

Quick Links

Download this manual
Register at www.Toro.com.
Original Instructions (EN)
21in Heavy-Duty Recycler
Bagger Lawn Mower
Model No. 22295—Serial No. 404330000 and Up
Form No. 3423-306 Rev A
®
/Rear
*3423-306* A

Advertisement

Table of Contents
loading

Related Manuals for Toro Recycler 22295

Summary of Contents for Toro Recycler 22295

  • Page 1 Form No. 3423-306 Rev A 21in Heavy-Duty Recycler ® /Rear Bagger Lawn Mower Model No. 22295—Serial No. 404330000 and Up *3423-306* A Register at www.Toro.com. Original Instructions (EN)
  • Page 2 Section 4442, maintained in additional information, contact an Authorized Service effective working order or the engine is constructed, Dealer or Toro Customer Service and have the model equipped, and maintained for the prevention of fire. and serial numbers of your product ready.

  • Page 3: Table Of Contents

    Contents Safety Safety ............... 3 This machine has been designed in accordance with General Safety ........... 3 ANSI B71.1-2017. Safety and Instructional Decals ......4 Setup ................ 6 General Safety 1 Removing the Cable Guards ......6 2 Installing the Handle ........6 This product is capable of amputating hands and 3 Installing the Cable Guards ......

  • Page 4: Safety And Instructional Decals

    Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decaloemmarkt Manufacturer's Mark 1. This mark indicates that the blade is identified as a part from the original machine manufacturer.
  • Page 5 decal125-8406 125-8406 1. Choke 3. Slow 2. Fast decal130-6722 130-6722 1. Attention—read the Operator's Manual. decal130-9670 130-9670 1. Severing hazard of hand or foot; mower blade—keep away from moving parts. decal133-8062 133-8062...

  • Page 6: Setup

    Setup Important: Remove and discard the protective plastic sheet that covers the engine and any other plastic or wrapping on the machine. Removing the Cable Guards No Parts Required Procedure g235164 Figure 3...

  • Page 7: Installing The Handle

    Installing the Handle No Parts Required Procedure g235013 Figure 4...

  • Page 8: Installing The Cable Guards

    Installing the Cable Guards No Parts Required Procedure g235163 Figure 5 Installing the Recoil-Starter Rope in the Rope Guide No Parts Required Procedure g235010 Figure 6...

  • Page 9: Filling The Engine With Oil

    Filling the Engine with Oil No Parts Required Procedure Important: Your machine does not come with oil in the engine. Before starting the engine, fill the engine with oil. g235721 Figure 7...

  • Page 10: Assembling The Grass Bag

    Assembling the Grass Bag No Parts Required Procedure g238450 Figure 8 Adjusting the Self-Propel Drive No Parts Required Procedure Important: You must adjust the self-propel-drive cable before you operate the machine for the first time. Refer to Adjusting the Self-Propel Drive (page 24).

  • Page 11: Product Overview

    Product Overview Operation Note: Determine the left and right sides of the machine from the normal operating position. Before Operation Before Operation Safety General Safety • Always shut off the machine, wait for all moving parts to stop, and allow the machine to cool before adjusting, servicing, cleaning, or storing it.

  • Page 12: Filling The Fuel Tank

    – Avoid prolonged breathing of vapors. – Keep your hands and face away from the nozzle and the fuel-tank opening. – Keep fuel away from your eyes and skin. Filling the Fuel Tank g230458 Figure 10 DANGER Gasoline is extremely flammable and explosive.

  • Page 13: Checking The Engine-Oil Level

    Checking the Engine-Oil Level Service Interval: Before each use or daily—Check the engine-oil level. Important: If the oil level in the crankcase is too low or too high and you run the engine, you may damage the engine. g235721 Figure 11 Adjusting the Handle Height You can raise or lower the handle in 1 of 3 positions that is more comfortable for you (Figure...

  • Page 14: Adjusting The Cutting Height

    Adjusting the Cutting Height DANGER Adjusting the cutting-height levers could bring your hands into contact with a moving blade and result in serious injury. • Shut off the engine and wait for all movement to stop before adjusting the cutting height. •...
  • Page 15 • Check the grass catcher components and the discharge chute frequently for any wear or deterioration and replace them with genuine Toro parts when necessary. Slope Safety • Mow across the face of slopes; never up and down.

  • Page 16: Starting The Engine

    Starting the Engine Connect the spark-plug wire to the spark plug. Open the fuel valve by moving the fuel-valve lever to the right (Figure 14). g024165 Figure 14 1. Fuel-valve lever Move the throttle-control lever to the C position (A of Figure 15).

  • Page 17: Shutting Off The Engine

    Shutting Off the Engine Release the blade-control bar. The engine should shut off and the blade should stop within 3 seconds. If they do not, contact an Authorized Service Dealer. Note: Close the fuel valve by moving the fuel-valve lever (Figure 14) to the left if you will not be starting the engine soon afterward.

  • Page 18: Recycling The Clippings

    A worn grass bag could allow small stones and other similar debris to be thrown toward you or bystanders, resulting in serious personal injury or death. Check the grass bag frequently. If it is damaged, install a new Toro replacement bag. WARNING The blades are sharp;...
  • Page 19 Installing the Grass Bag Shut off the engine and wait for all moving parts to stop. Raise and hold up the rear deflector (A of Figure 19). Remove the rear-discharge plug by pushing in the latch with your thumb and pulling the plug out from the machine (B and C of Figure 19).

  • Page 20: Operating Tips

    Sharpen the blade. • Replace the blade when necessary with an original • Walk at a slower pace while mowing. Toro replacement blade. • Raise the cutting height on your machine. • Mow only dry grass or leaves. Wet grass and leaves tend to clump on the yard and can cause •...

  • Page 21: Cleaning Under The Machine

    • Note: Secure the machine from rolling. The blade will draw in water and wash out the clippings. Let the water run until you • Close the fuel valve before loading the machine no longer see clippings being washed out from for hauling.

  • Page 22: Maintenance

    Wear gloves and eye protection when servicing • To ensure optimum performance of the machine, the machine. use only genuine Toro replacement parts and • The blade is sharp; contacting the blade can result accessories. Replacement parts and accessories in serious personal injury. Wear gloves when made by other manufacturers could be dangerous, servicing the blade.

  • Page 23: Servicing The Air Filter

    Servicing the Air Filter Inspect the foam and paper elements, and replace them if they are damaged or excessively dirty. Service Interval: Before each use or daily—Inspect the air-filter elements. If the paper element is excessively dirty, replace Every 50 hours—Clean the air-filter elements. Clean them more frequently in dusty operating Note: Never try to brush dirt off the paper...

  • Page 24: Servicing The Spark Plug

    Tip the machine onto its right side (air filter up) overtightening a spark plug may damage the to drain the oil into the drain pan. threads in the cylinder head. After draining the oil, return the machine to the Connect the wire to the spark plug. operating position.

  • Page 25: Maintaining The Blade

    knob (Figure 24) counterclockwise 1 turn and repeat steps through 6. For a new traction belt, rotate the drive-cable-adjustment knob clockwise 1 additional turn to allow for the normal stretching of the belt during the break-in period. Note: You can skip this step if you are adjusting a used belt.
  • Page 26 Installing the Blade rough or in sandy conditions. Install a sharp, balanced Toro blade, the File the top side of the blade to maintain its original accelerator, the lock washer, and the blade bolt.

  • Page 27: Adjusting The Blade-Brake Cable

    Adjusting the Blade-Brake Cable If the blade-brake cable needs to be replaced or is not adjusted properly, adjust the blade-brake cable. Shut off the engine and wait for all moving parts to stop. Disconnect the wire from the spark plug. Hold the blade-control bar at 19 cm (7-5/8 inches) from the top of the handle as shown inFigure...

  • Page 28: Storage

    Storage Check the condition of the accelerator; refer to Inspecting the Accelerator (page 25). Service the air filter; refer to Servicing the Air To prepare the machine for off-season storage, Filter (page 23). perform the recommended maintenance procedures; refer to Maintenance (page 22).

  • Page 29: Troubleshooting

    Troubleshooting Problem Possible Cause Corrective Action The engine does not start. 1. The fuel tank is empty or the fuel 1. Drain and/or fill the fuel tank with fresh system contains stale fuel. fuel. If the problem persists, contact an Authorized Service Dealer.
  • Page 30 Notes:...
  • Page 31 While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.

Table of Contents