hit counter script
Download
Share
Print this page
IBM Power System AC922 Quick Install Manual
  1. Manuals
  2. Brands
  3. IBM Manuals
  4. Server
  5. Power System AC922
  6. Quick install manual
IBM Power System AC922 Quick Install Manual

IBM Power System AC922 Quick Install Manual

Hide thumbs Also See for Power System AC922:

Advertisement

Quick Links

Download this manual
IBM
Power System AC922
(8335-GTX) Quick Install
IBM
Guide
®
®
IBM
Power
System AC922 (8335-GTX) Quick Install Guide
Read all precautions and instructions before you start working on the system and its parts.
Use normal electrostatic discharge (ESD) procedures when working on the system and parts. IBM
recommends wearing gloves and an ESD wrist strap to avoid possible damage to the equipment.
The information about the 8335-GTX system is available online in the IBM Knowledge Center.
http://www.ibm.com/support/knowledgecenter/8335-GTX
Parts
Use this information to find the field-replaceable unit (FRU) part numbers.
Figure 1. Rack final assembly

Advertisement

loading

Related Manuals for IBM Power System AC922

Summary of Contents for IBM Power System AC922

  • Page 1 Read all precautions and instructions before you start working on the system and its parts. Use normal electrostatic discharge (ESD) procedures when working on the system and parts. IBM recommends wearing gloves and an ESD wrist strap to avoid possible damage to the equipment.
  • Page 2 Figure 2. System parts...
  • Page 3 Figure 3. Additional system parts (8335-GTC, 8335-GTG, or 8335-GTH air-cooled system)
  • Page 4 Figure 4. Additional system parts (8335-GTW or 8335-GTX water-cooled system with 4 GPUs)
  • Page 5 Figure 5. Additional system parts (8335-GTW or 8335-GTX water-cooled system with 6 GPUs)

  • Page 6: Rear Ports

    Intelligent Platform Management Interface (IPMI) serial Ethernet. Use the top Ethernet port for the BMC/IPMI interface (as PHY0) and direct OS usage. Use the bottom Ethernet port for only direct OS usage (as PHY1). USB 3.0 Installing and removing IBM Power System AC922 (8335-GTX) parts...
  • Page 7 Figure 7. Removing the power supplies from the system Figure 8. Removing the cover Figure 9. Disk drive lock detail Figure 10. Removing a fan from the system...
  • Page 8 Figure 11. Removing the disk and fan signal cable Figure 12. Removing the fan power cable from the system Figure 13. Removing the front pipe holder Figure 14. Moving the front pipe away...
  • Page 9 Figure 15. Screw locations for the disk drive and fan card Figure 16. Removing the disk drive and fan card Figure 18. Location of the memory modules Figure 17. Removing a memory module...
  • Page 10 Figure 19. Removing the time-of-day battery from the system backplane Figure 20. Removing a PCIe adapter Figure 21. Removing the BMC card...
  • Page 11 Figure 23. Removing the power switch and cable from the system backplane Figure 22. Location of the connectors for the USB cable and connector and the power switch and cable Figure 24. Removing the rack installation support Figure 25. Remove the top and side screws...
  • Page 12 Figure 27. Removing USB cable and connector from the power switch Figure 26. Pull out the power switch and cable Figure 28. Open the cold plate retainer Figure 29. Remove the cold plate; attach to clip...
  • Page 13 Figure 30. Remove eight GPU screws per GPU; do not Figure 31. Remove GPU loosen the four spring-loaded screws Figure 32. Replace GPU Figure 33. Replacing the GPU assembly into GPU socket...
  • Page 14 Figure 34. Aligning the cold plate on the GPUs Figure 35. Secure the cold plate retainer screw Figure 36. Remove the middle support side screws Figure 37. System backplane screw locations...
  • Page 15 Figure 38. Lifting out the system backplane Figure 40. Removing the cold plate and attaching the protective cover Figure 39. Loosening the cold plate retainer screw...
  • Page 16 Figure 41. Removing the TIM from the system processor module Figure 42. Removing dust and debris from the system processor module area Figure 43. Lowering the removal tool onto the system Figure 44. Placing the tool at an angle on the top cover of processor module the packaging...
  • Page 17 Figure 46. Inspecting the thermal interface material Figure 45. Placing the tool at an angle on the top cover of the packaging Figure 48. Removing the protective cover from the cold plate Figure 47. Installing a new TIM onto the system processor module...
  • Page 18 Figure 49. Tightening the cold plate retainer screw ™ ™ This May 18, 2018 edition applies to IBM Power Systems servers that contain the POWER9 processor and to all associated models. © Copyright IBM Corporation 2018. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract...