Contents 1 Safety information..................1 2 Packing List ....................6 3 Panels ......................7 3.1 Front Panel ......................7 3.2 Rear Panel ......................8 4 Connecting Cables..................9 4.1 Using the AV Cable.................... 9 4.2 Using the Coaxial Cable................... 10 4.3 Using the HDMI Cable..................
1 Safety information This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Areas with flammables and explosives Do not use the device where flammables or explosives are stored (in a gas station, ...
Page 4
Do not place any object, such as a candle or a water container, on the device. If any foreign object or liquid enters the device, immediately stop using it, power it off, and remove all cables connected to it. Then, contact an authorized service center.
Page 5
If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using it at once. Continued use may lead to electric shocks, short circuits, or fire. Do not touch the power cord with wet hands or pull the power cord to disconnect ...
Page 6
Do not drop the device or battery. If the device or battery is dropped, especially on a hard surface, and may be damaged. Cleaning and maintenance During storage, transportation, and operation of the device, keep it dry and protect ...
Page 7
Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user's authority to operate the equipment. This device is intended to be attached to a receiver that is not used to receive over-the-air broadcast signals.
2 Packing List The following table lists the accessories in the product package. Item Quantity Set-Top Box Remote control AAA batteries Power adapter RF cable AV cable HDMI cable User Guide If you find any item missing or damaged, contact your service provider.
3 Panels The figures of the set-top box (STB) shown in the following sections are only for your reference. The actual appearance may differ slightly from that shown depending on the product you purchased. 3.1 Front Panel Item Description SIM slot House a smart card that enables you to watch programs.
The maximum voltage/current output from the USB port is 5 V/500ma. That is, the input voltage/current of the USB device connected to the USB port cannot exceed 5 V/1 A. Otherwise; the device may not work correctly. 3.2 Rear Panel F C C I D : Q I S D C 3 5 1 C o n s u m o d e e n e r g i a 1 0 0 W h...
4 Connecting Cables Before connecting or disconnecting a cable, power off the STB, TV and all the devices connected to them. Before connecting, check that all the necessary cables are available. Then connect the cables as shown in the following figures. Do not plug or unplug a cable when a device is powered on.
4.2 Using the Coaxial Cable F C C I D : Q I S D C 3 5 1 C o n s u m o d e e n e r g i a 1 0 0 W h C O F E T E L : X X X X X - Y Y Y Step 1 Using a coaxial cable, connect CABLE IN interface on the STB to the cable...
Page 13
Step 3 Connect the other end of the HDMI cable to your TV's HDMI interface. Step 4 Use the power adapter to connect the STB's power interface to a working power socket, extension cord or surge protector.
5 Inserting the SIM Card To prevent damage to the STB or the SIM card: Do not insert or remove the SIM card when STB is powered on. Do not frequently insert or remove the smart card. Step 1 Record the serial number that appears in the back of your SIM card.
6 Troubleshooting The following table lists the common STB problems and their possible causes and solutions. Problem Possible Cause Solution The standby The power adapter is Correctly connect the power indicator on the not correctly connected. adapter to the STB, and then front panel does not plug the power adapter into a turn on.
Page 16
Problem Possible Cause Solution Teleview Rating is smart card is set too Rating. not enough low. Pop-up Tip: STB is The time is not on the Please change the working not in working working hours of smart hours of the smart card. hours card.
7 Specifications The product specifications are subject to changes without notification. Tuner and Demodulator Parameter Specifications Input Frequency Range 47 MHz to 862 MHz Input voltage level 33 dBuv – 100 dBuv (64QAM) Input Impedance 75Ω Modulation 64, 256 QAM Symbol Rate 64 QAM : 5.057 M symbols/s 256 QAM: 5.361 M symbols/...
Page 18
Environmental Parameter Specifications Input Voltage 100V~240V AC Output Voltage 12V/2A DC (Power adapter) Power Consumption < 24W Dimension (L × W × H) About 220 mm × 110 mm × 44 mm Weight About 0.572 kg Working Temperature 0°C to 45°C Working Humidity 5% to 90%, non-condensing Smartcard Interface...
Page 20
If you would like a copy of the GPL source code contained in this product shipped on a CD, for a charge no more than the cost of preparing and mailing a CD to you, please contact mobile @huawei.com Privacy Policy Please refer to our privacy policy on our websites for the information about how we protect your personal information.
Page 21
HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China www.huaweidevice.com...