Related Manuals for Honeywell CK65 Series
Summary of Contents for Honeywell CK65 Series
- Page 1 CK65 Mobile Computer for use in Hazardous Locations CK65 NI (CK65-L0N-xxxxx1F) Quick Start Guide CK65-HZ-A-EN-QS-01 Rev A 2/20...
- Page 2 Introduction This document is only for CK65 models marked as certified for use in hazardous environments. CK65 models intended for use in hazardous locations are identifiable by specific labeling on the back of the device. Before you attempt to use, charge or replace the battery in the device, carefully read all labels, markings and product documentation provided in the box or online at www.honeywellaidc.com.
-
Page 3: Memory Card Specifications
Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with mobile computers for maximum performance and durability. Contact a Honeywell sales representative for additional information on qualified memory card options. - Page 4 Charging accessories and additional spare batteries must not be carried into the hazardous area. Les accessoires de charge et les batteries de rechange supplémentaires ne doivent pas être transportés dans un environnement dangereux. Warning: Explosion Hazard - Substitution of any components may impair suitability.
- Page 5 Mobile Computer Features All Imagers Imager (LED / Laser Aperture) Ambient Light Sensor Touch Panel Notification/Scan/ Battery Status LEDs Scan Buttons Power Button Keyboard (model dependent) Microphone Keypad Status LEDs...
- Page 6 CK65 Model with N6803 Imager Laser Safety Camera Lens Label Location and Flash (optional) Hand Strap Speaker Speaker Port Port Scan/Aux Button Scan/Aux Button All CK65 Units Battery Latch (under hand strap) I/O Cover MicroSD Card Door (battery and hand strap removed) I/O Connector (I/O cover removed)
- Page 7 CK65 Model with EX20 Imager Laser Safety Camera Lens Label Location and Flash (optional) Hand Strap Speaker Speaker Port Port Scan/Aux Button Scan/Aux Button All CK65 Units Battery Latch (under hand strap) I/O Cover MicroSD Card Door (battery and hand strap removed) I/O Connector (I/O cover removed)
- Page 8 Install a microSD Card (Optional) Always power off the computer before attempting to install or remove a card. "Install the Battery" for hand strap release information. Format the microSD card before initial use.
-
Page 9: Install The Battery
Install the Battery The CK65 mobile computer ships with a Li-ion 3.6 VDC, 25.2 watt-hour battery manufactured for Honeywell International Inc. Before you attempt to use, charge or replace the battery in the mobile computer, carefully read all the information under "Equipment for Use in Hazardous... - Page 10 Ensure all components are dry prior to placing the battery in the computer. Mating wet components may cause damage not covered by the warranty. Assurez-vous que tous les composants sont secs avant de placer la batterie dans l’ordinateur. L’insertion de composants humides risque de provoquer des dommages non couverts par la garantie.
- Page 11 4 hours. Using the computer while charging the battery increases the time required to reach a full charge. We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty.
-
Page 12: Turn Power On/Off
Remove the I/O Cover Remove the I/O cover before inserting the CK65 into a charging dock: Warning: The I/O cover must be attached when using the CK65 in a hazardous environment. Avertissement : Le couvercle entrée-sortie doit être fixé lorsque le CK65 est utilisé dans un environnement incendiaire. -
Page 13: Battery Replacement
Battery Replacement Before you attempt to use, charge or replace the battery in the mobile computer, carefully read all the information under "Equipment for Use in Hazardous Locations". Avant d’essayer d’utiliser, de charger ou de remplacer la batterie de l’ordinateur portable, lisez attentivement toutes les informations relatives aux "Equipment for Use in Hazardous Locations". -
Page 14: About The Home Screen
Press and release the Power button to wake the computer. Drag the toward the top of the display to unlock the computer. About the Home Screen Notification /Status Bar Home Screen Panel Favorites Tray Search Bar Navigation Buttons... -
Page 15: Navigation And Function Buttons
Navigation and Function Buttons For button locations, see "Mobile Computer Features". Button Description Back Return to the previous screen. Home Return to the Home screen. Recent Apps View and switch between recently used apps. Scan Press the right, left or front scan button to trigger the scanner. - Page 16 Scan a Barcode with the Scan Demo Note: For optimum performance, avoid reflections by scanning the barcode at a slight angle. Swipe up from the bottom of the Home screen to access all apps. Touch Demos > Scan Demo. Point the computer at the barcode. Touch Scan on the touch screen or press and hold any Scan button.
- Page 17 Sync Data To move files between your CK65 and a computer: Connect the CK65 to your computer using a USB charge/ communication accessory. On the CK65, swipe down from the top of the screen to see the notifications panel. Touch the Android System notification twice to open the options menu.
-
Page 18: Limited Warranty
To restart the computer if the touch panel display is unresponsive: • Press and hold the Power button for approximately 8 seconds until the computer restarts. Note: To learn about advanced reset options, see the user guide. Support To search our knowledge base for a solution or log into the Technical Support Portal and report a problem, go to ... - Page 19 Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.