Provides a summary of warnings for the module and steps for installing the module within a CGR 1000 Series router. Software Configuration, page 7 Software commands required to configure the CGM-WPAN-OFDM-FCC module and Cisco CGR 1000 Series routers. Related Documentation, page 8 Provides links to supporting documentation.
(formerly known as CG-Mesh) network. Note: Before you install the module, please review the following document on how to configure a Cisco Resilient Mesh Network that supports a Cisco 1000 running Cisco IOS software and installed with a CGM-WPAN-OFDM-FCC module:...
(10/100) ports for intelligent control primarily in the electrical grid. CGR 1000s installed with a CGM-WPAN-OFDM-FCC module provide a low cost, low power, small scale DA solution. Ruggedized IP41 enclosures are available for the CGR 1000 to support installation within an outdoor cabinet.
Connected Grid Module (CGM) WPAN-OFDM-FCC Module - Cisco IOS Installation Guidelines LEDs Table 4 LEDs for CGM WPAN-OFDM-FCC LED Name Definition State RSSI Measure of power present in the Yellow (Off) / Green (Off): RSSI less than -105 dBm received radio signal.
Page 6
Figure 1Front Panel of the CGM-WPAN-OFDM-FCC Module, page 4 Installing the Module Note: Before you install or remove the CGM-WPAN-OFDM-FCC module within the host router, you must power down the router as described in either the Cisco 1120 Connected Grid Router Hardware Installation Guide...
Your CGR 1000 must be running Cisco IOS Release 15.7(3)M1 (cgr1000-universalk9-bundle.SPA.157-3.M1.bin) or greater to support the CGM WPAN-OFDM-FCC Module, Note: Before you install the CGM-WPAN-OFDM-FCC module in your Resilient Mesh Network, please review the CGR 1000 and CGM-WPAN installation documents noted in the...