1 Safety Precautions 1.1. General Guidelines 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.
2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensi- tive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor [chip] components.
2.2. About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
3 Service Navigation 3.1. Important Notice This service manual is for MANUFACTURING ID NO. TC-32LX85N as indicated in the label at the model name plate of the unit. 3.2. Service Hint Board Name Function A-Board Rear Terminal, AV Switch, MCU, Audio & Video...
4 Specifications Power Source AC 120 V, 60 Hz Power Consumption Maximum 142 W Standby Condition 0.6 W Display panel Aspect Ratio 16:9 Visible screen size 32 inch class (31.5 inches measured diagonally) (W × H × Diagonal) 27.5 inch × 15.4 inch × 31.5 inch (698 mm × 392 mm × 800 mm) 1,049,088 (1,366 (W) ×...
5 Service Mode 5.1. How to enter into Service Mode While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds. 5.1.1. Key command [1] button...Main items Selection in forward direction [2] button...Main items Selection in reverse direction [3] button...Sub items Selection in forward direction [4] button...Sub items Selection in reverse direction...
5.2. SRV-TOOL 5.2.1. How to access 1. Select [SRV-TOOL] in Service Mode. 2. Press [OK] button on the remote control. 5.2.2. Display of SOS History SOS History (Number of LED blinking ) indication. From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment. This indication except 2nd and 1st occurrence after shipment will be cleared by [Self-check indication and forced to factory ship- ment setting].
5.3. Hotel mode 1. Purpose Restrict a function for hotels. item Function 2. Access command to the Hotel mode setup menu Mode Select hotel mode off/on In order to display the Hotel mode setup menu, please Input Select input signal modes. enter the following command (within 2 second).
6 Troubleshooting Guide Use the self-check function to test the unit. 1. Checking the IIC bus lines 2. Power LED Blinking timing 6.1. Check of the IIC bus lines 6.1.1. How to access Self-check indication only: Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control for more than 3 seconds.
6.2. Power LED Blinking timing chart 1. Subject Information of LED Flashing timing chart. 2. Contents When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit.
Page 13
6.3. No Power First check point There are following 2 states of No Power indication by power LED. 1. No lit 2. Red is lit then turns red blinking a few seconds later. (See 6.2.)
7 Disassembly and Assembly Instructions 7.1. Rear cover 7.3. AC cord 1. Remove the 17 screws (A). 1. Remove the bushing of the AC cord from the tuner cover. 2. Remove the 3 screws (B), 2. Disconnect the connector (P1) of AC cord. 3.
7.5. Control panel assy 7.7. P-Board 1. Disconnect the connector (A7). 1. Remove the 7 screws. 2. Remove the 2 screws. 2. Disconnect the connectors (P3/P7). 3. Remove the control panel assy. 3. Remove the P-Board. 7.6. Side AV bracket and Inverter shield 7.8.
8 Measurements and Adjustments 8.1. Voltage chart of P-board VOLTAGE TEST POINT SPECIFICATION TP7070 24.0±1.2V SUB_5V TP7015 5.13±0.25V SUB_9V TP7055 9.27±0.45V BT_30V TP7072 31.5±2.5V SOUND_15V TP7050 15.0V±1.2V DTV12V TP7057 12.0±1.2V PANEL_12V TP7058 12.0±0.6V STB_5V TP7061 5.0±0.5V 8.2. Voltage chart of A-board VOLTAGE TEST POINT SPECIFICATION...
8.4. Picture level adjustment (VIDEO) Instrument Name Remarks 1. REMOTE TRANSMITTER 2. Video signal generator (Standard) Adjustment or Inspection Procedure Remarks <procedure> 1. Receive the CVBS standard signal. (Need standard sync signal). (ASPECT: ZOOM or FULL, Picture mode: VIVID, AI Picture: OFF) * BACK LIGHT MAX VALUE <Inspection>...
10 Wiring Connection Diagram 10.1. Caution statement. Caution: Please confirm that all flexible cables are assembled correctly. Also make sure that they are locked in the connectors. Verify by giving the flexible cables a very slight pull.
Page 41
Q7101 D7003 J415 FOR CONTINUED PROTECTION AGAINST RISK OF FIRE REPLACE ONLY WITH "Littel fuse " TYPE " 215 ". CF7000 J409 T5AH 250V LF7001 F7001 LF7002 C7003 R7000 RL7005 TC-32LX85N TC-32LX85N P-BOARD TXN/P10NGCS P-BOARD TXN/P10NGCS V-BOARD TNPA4483ACS V-BOARD TNPA4483ACS...
Page 42
I F D O U T 2 I F D O U T 2 R4026 TP4002 TP4001 R4025 Q 4 0 0 3 C4013 R4031 TP4004 D2251 JK3001 D 2 2 5 1 J K 3 0 0 1 TC-32LX85N TC-32LX85N A-BOARD TNPH0757S A-BOARD TNPH0757S...
Page 43
I F D O U T 2 JS3078 JS3077 D2251 JK3001 T N P H 0 7 5 7 1 A C4004 S3020 FL3030 FL3031 R2251 R2252 C2251 J K 3 0 0 1 C4773 D3052 TC-32LX85N TC-32LX85N A-BOARD TNPH0757S A-BOARD TNPH0757S...
13.2. Electrical Replacement Parts List 13.2.1. Replacement Parts List Notes...
Page 49
13.2.2. Electrical Replacement Parts List Safety Ref. No. Part No. Part Name & Pcs Remarks Description Safety Ref. No. Part No. Part Name & Pcs Remarks C4030 F2G0G101A007 E 100UF 6.3V Description C4031,32 F1G1C104A116 C 0.10UF, K, 16V C4033 F1G1C1030008 C 0.010UF, K, K1KB30B00044 30P CONNECTOR K1KY23AA0607 23P CONNECTOR C4036...
Page 50
Safety Ref. No. Part No. Part Name & Pcs Remarks Safety Ref. No. Part No. Part Name & Pcs Remarks Description Description C4522 F1H0J1050012 C 1UF, K, 16V C5628,29 ECGRL0G680ER C 68PF, J, 4V C4523 EEEHB0G470R C 47PF, J, 4V C5631 F2G1C470A022 E 47UF, 16V C4526-30...
Page 51
Safety Ref. No. Part No. Part Name & Pcs Remarks Safety Ref. No. Part No. Part Name & Pcs Remarks Description Description C7148 F2A1H221A115 E 220UF, 50V C8345 F1G1C104A116 C 0.10UF, K, 16V C7149 F2A1E471A102 E 470UF, 25V C8346 F1G1C1030008 C 0.010UF, K, C7150 F1J1H682A834 C 6800UF, 50V PAVCA...
Page 52
Safety Ref. No. Part No. Part Name & Pcs Remarks Safety Ref. No. Part No. Part Name & Pcs Remarks Description Description D7003 B0FBAT000008 DIODE IC7001 C0DAEMZ00001 IC IC7005 C0DBAFG00018 IC D7004 B0BA01600007 ZENER DIODE PAVCA IC7006 C0CBCYE00001 IC D7005 B0BA03600021 ZENER DIODE IC7100 C0DABYY00014 IC...
Page 53
Safety Ref. No. Part No. Part Name & Pcs Remarks Safety Ref. No. Part No. Part Name & Pcs Remarks Description Description R2302 D1BB6192A055 M61.9KOHM, 1/10W PAVCA Q1006 2SD0601ARL TRANSISTOR R2303,04 ERJ3EKF2212 M 22KOHM, 1/16W Q2101-03 B1ABCF000231 TRANSISTOR R2350,51 ERJ2GEJ103 M 10KOHM, J,0.063W Q2104,05...
Page 54
Safety Ref. No. Part No. Part Name & Pcs Remarks Safety Ref. No. Part No. Part Name & Pcs Remarks Description Description R4058 ERJ2GEJ473 M 47KOHM, R4138 ERJ2GEJ562 M 5.6KOHM, J,0.063W J,0.063W R4059 ERJ2GEJ221 M 220 OHM, R4139,40 ERJ2GEJ103 M 10KOHM, J,0.063W J,0.063W R4060...
Page 55
Safety Ref. No. Part No. Part Name & Pcs Remarks Safety Ref. No. Part No. Part Name & Pcs Remarks Description Description R4552 ERJ2GEJ220 M 22 OHM, R5647 ERJ2GEJ473 M 47KOHM, J,0.063W J,0.063W R4561 ERJ2GEJ473 M 47KOHM, R5747 ERJ2GEJ103 M 10KOHM, J,0.063W J,0.063W R4564,65...
Page 56
Safety Ref. No. Part No. Part Name & Pcs Remarks Safety Ref. No. Part No. Part Name & Pcs Remarks Description Description R7126 ERJ6ENF7151 M7.15KOHM, 1/10W R8101 ERJ2GEJ103 M 10KOHM, J,0.063W R7127 ERJ6ENF3742 M37.4KOHM, 1/10W R8106 ERJ2GEJ202 M 2KOHM, R7128 D0GDR00Z0002 M 0 OHM, 1/10W J,0.063W R7129...
Page 57
Safety Ref. No. Part No. Part Name & Pcs Remarks Description R8589 ERJ2GEJ473 M 47KOHM, J,0.063W R8593 ERJ2GEJ473 M 47KOHM, J,0.063W R8597-01 ERJ2GEJ473 M 47KOHM, J,0.063W R8602 ERJ2GEJ222 M 2.2KOHM, J,0.063W R8604 ERJ2GEJ103 M 10KOHM, J,0.063W R8661 ERJ2GEJ103 M 10KOHM, J,0.063W R8663 ERJ2GEJ103...