hit counter script

Advertisement

ENG
Instructions

Advertisement

Table of Contents
loading

Summary of Contents for Canon 10x32 IS

  • Page 1 Instructions...
  • Page 2 Thank you for purchasing a Canon product. The Canon 10x32 IS (10x), 12x32 IS (12x), and 14x32 IS (14x) prism binoculars are equipped with a lens-shift type Image Stabilizer. Before using the binoculars, read this instruction booklet to familiarize yourself with the proper operation.
  • Page 3 Precautions for Use (Please be sure to read before use) z Please be sure to read this section carefully beforehand in order to use your binoculars correctly and safely. z The following precautions are designed so that you will use your binoculars safely.
  • Page 4 Precautions for Use (Please be sure to read before use) Caution (regarding the binoculars) Details pertaining to risks that may result in damage to property. z Binoculars are precision instruments. Do not drop them or subject them to shock. Never attempt to disassemble them. z Do not place these binoculars underwater.
  • Page 5 Precautions for Use (Please be sure to read before use) Caution (regarding the batteries) Details pertaining to risks that may result in injury. z In the event that liquid from the inside of the battery leaks out and contacts your skin, be sure to wash the liquid off thoroughly. Also, do not rub your eyes or mouth using any hand that made contact with liquid from the battery.
  • Page 6 Nomenclature (The 14x32 IS is shown in the illustrations.) POWERD IS button Focusing knob Lamp Image Stabilizer button Objective lenses Eyecup Objective lens protector Battery chamber cover Dioptric correction scale Dioptric correction ring String attachment location Strap mount Eyepiece lenses Eyepiece lens caps ENG-5...
  • Page 7: Installing The Strap

    Using the Lens Caps Attaching Eyepiece Lens Caps Attach them over the eyecups. Installing the Strap Fasten the strap. Make sure that there is no slack and the strap does not loosen at the clasp when you pull it. Connect the objective lens caps. Install the string included in the package to the eyepiece lens cap (1) and then attach the string to the...
  • Page 8: Loading The Batteries

    If there is moisture, make sure to remove it and adequately dry it off before changing batteries. Battery Life (Continuous Use) (Based on Canon's testing conditions) 23°C / 73°F –10°C / 14°F Size-AA alkaline batteries* Approx.
  • Page 9: Before You Start

    Before You Start Adjust the eyecup position. When using the binoculars while wearing eyeglasses, turn the eyecups to adjust the height for easy viewing. Adjust the width of the binoculars. Look through the binoculars and adjust the angle of the eyepieces until the left and right images converge.
  • Page 10: Using The Image Stabilizer

    Using the Image Stabilizer When you look through the binoculars, the image may be shaking and difficult to see since your hands are holding the binoculars. In such a case, the Image Stabilizer can help steady the image. The binoculars feature a general IS, which provides image stabilization when looking at a wide area, and a POWERD IS, which is especially effective when continuously aiming the binoculars at one point.
  • Page 11 Using the Image Stabilizer (2) Holding down the button Starting and stopping Image Stabilizer operation • The general IS will operate while holding down the Image Stabilizer button (1). Similarly, the POWERD IS will operate while holding down the POWERD IS button (2).
  • Page 12: Using The Case

    Using the Case Place the binoculars in the case while allowing the strap to extend outside the case. Close the zipper to where the strap extends from the case and then close the case flap. ENG-11...
  • Page 13: Troubleshooting

    Troubleshooting If there is a problem with the binoculars, first refer to the table below to see if you can resolve it. If the problem cannot be resolved, contact your dealer or nearest Canon Service Center. Problem Probable Cause Corrective Measures The image is not clear.
  • Page 14: Major Specifications

    Major Specifications 10x32 IS 12x32 IS 14x32 IS Type Prism binoculars Magnification Objective lens effective 32 mm diameter Real field of view 6° 5° 4.3° Apparent field of view (Calculated based on 55.3° 55.5° ISO 14132-1:2002) Field of view at 1000 m / yds...
  • Page 15 For more information about the recycling of this product, please contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/weee, or www.canon-europe.com/battery. ENG-14...
  • Page 16 CT1-B033-A 0317Ni © CANON INC. 2017...

This manual is also suitable for:

12x32 is14x32 is

Table of Contents