hit counter script
Siemens SIMATIC NET SCALANCE XM-400 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Switch
  5. SIMATIC NET SCALANCE XM-400
  6. Operating instructions manual

Siemens SIMATIC NET SCALANCE XM-400 Operating Instructions Manual

Industrial ethernet switches
Hide thumbs Also See for SIMATIC NET SCALANCE XM-400:
Table of Contents

Advertisement

Quick Links

SIMATIC NET
Industrial Ethernet switches
SCALANCE XM-400
Operating Instructions
09/2018
C79000-G8976-C306-08
___________________
Introduction
___________________
Safety notices
Recommendations on
___________________
network security
___________________
Description of the device
___________________
Installation
___________________
Connecting up
___________________
Upkeep and maintenance
___________________
Technical specifications
___________________
Dimension drawings
___________________
Approvals
1
2
3
4
5
6
7
8
9
A

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIMATIC NET SCALANCE XM-400

Summary of Contents for Siemens SIMATIC NET SCALANCE XM-400

  • Page 1 ___________________ Introduction ___________________ Safety notices Recommendations on ___________________ SIMATIC NET network security ___________________ Description of the device Industrial Ethernet switches SCALANCE XM-400 ___________________ Installation ___________________ Connecting up Operating Instructions ___________________ Upkeep and maintenance ___________________ Technical specifications ___________________ Dimension drawings ___________________ Approvals 09/2018 C79000-G8976-C306-08...

  • Page 2: Legal Information

    Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Table Of Contents

    Table of contents Introduction ............................. 5 Safety notices ............................11 Recommendations on network security ....................13 Description of the device ........................19 Properties and functions ......................19 Product overview ........................21 Accessories ..........................23 Spare parts ..........................26 Device views ........................... 27 4.5.1 SCALANCE XM408-4C ......................
  • Page 4 Table of contents Connecting up............................55 Safety when connecting up ....................55 Spring-loaded terminal ......................58 Power supply .......................... 58 Signaling contact ........................60 Serial interface ........................61 Out-of-band interface ......................63 Functional ground ........................64 Upkeep and maintenance ........................65 Downloading new firmware using TFTP without WBM and CLI ..........

  • Page 5: Introduction

    Introduction Purpose of the Operating Instructions These operating instructions support you when installing and connecting up devices of the SCALANCE XM-400 product group. The configuration and the integration of the device in a network are not described in these operating instructions. Validity of the Operating Instructions These operating instructions apply to the following devices: ●...
  • Page 6 ● On the data medium that ships with some products: – Product CD / product DVD – SIMATIC NET Manual Collection ● On the Internet pages of Siemens Industry Online Support (https://support.industry.siemens.com/cs/ww/en/ps/15315) Documentation on configuration You will find detailed information on configuring the devices in the following configuration manuals: ●...
  • Page 7 ● On the data medium that ships with some products: – Product CD / product DVD – SIMATIC NET Manual Collection ● On the Internet pages of Siemens Industry Online Support: – Industrial Ethernet / PROFINET Industrial Ethernet System Manual (https://support.industry.siemens.com/cs/ww/en/view/27069465) –...

  • Page 8: Operating Instructions, 09/2018, C79000-G8976-C306

    Feed under https://www.siemens.com/industrialsecurity (https://www.siemens.com/industrialsecurity) Catalogs You will find the article numbers for the Siemens products of relevance here in the following catalogs: ● SIMATIC NET Industrial Communication / Industrial Identification, catalog IK PI ● SIMATIC Products for Totally Integrated Automation and Micro Automation, catalog ST 70 ●...
  • Page 9 Do not dispose of the products at public disposal sites. For environmentally friendly recycling and the disposal of your old device contact a certified disposal company for electronic scrap or your Siemens contact (Product return (https://support.industry.siemens.com/cs/ww/en/view/109479891)). Note the different national regulations.
  • Page 10 Introduction SCALANCE XM-400 Operating Instructions, 09/2018, C79000-G8976-C306-08...

  • Page 11: Safety Notices

    Safety notices Read the safety notices Note the following safety notices. These relate to the entire working life of the device. You should also read the safety notices relating to handling in the individual sections, particularly in the sections "Installation" and "Connecting up". CAUTION To prevent injury, read the manual before use.
  • Page 12 Safety notices SCALANCE XM-400 Operating Instructions, 09/2018, C79000-G8976-C306-08...

  • Page 13: Recommendations On Network Security

    ● Evaluate your plant as a whole in terms of security. Use a cell protection concept with suitable products (https://www.industry.siemens.com/topics/global/en/industrial- security/pages/default.aspx). ● When the internal and external network are disconnected, an attacker cannot access internal data from the outside. Therefore operate the device only within a protected network area.
  • Page 14 ● Keep the firmware up to date. Check regularly for security updates for the device. You can find information on this at the Industrial Security (https://www.siemens.com/industrialsecurity) website. ● Inform yourself regularly about security recommendations published by Siemens ProductCERT (https://www.siemens.com/cert/en/cert-security-advisories.htm). ● Only activate protocols that you require to use the device.
  • Page 15 Recommendations on network security Secure/non-secure protocols and services ● Avoid or disable non-secure protocols and services, for example HTTP, Telnet and TFTP. For historical reasons, these protocols are available, however not intended for secure applications. Use non-secure protocols on the device with caution. ●...
  • Page 16 Recommendations on network security ● Use the configuration options of the interfaces, e.g. the "Edge Type". ● Configure the receive ports so that they discard all untagged frames ("Tagged Frames Only"). Available protocols The following list provides you with an overview of the open protocol ports. The table includes the following columns: ●...
  • Page 17 Recommendations on network security Protocol Protocol/ Default port status Configurable port Authentication Encryption Port number EtherNet/IP TCP/44818, Closed ✓ UDP/2222,44 DHCP UDP/67,68 Open ✓ Syslog UDP/514 Closed ✓ RADIUS UDP/1812,18 Closed ✓ TFTP UDP/69 Open UDP/520 Closed SCALANCE XM-400 Operating Instructions, 09/2018, C79000-G8976-C306-08...
  • Page 18 Recommendations on network security SCALANCE XM-400 Operating Instructions, 09/2018, C79000-G8976-C306-08...

  • Page 19: Description Of The Device

    Description of the device Properties and functions SCALANCE XM-400 product group The product group SCALANCE XM-400 consists of basic devices (compact switches) and extenders (port extenders and function extender). SCALANCE XM-400 basic device Basic properties The SCALANCE XM-400 basic devices are modular compact switches with fixed RJ-45 ports (10/100/1000 Mbps) and SFP transceiver slots that can be equipped individually.
  • Page 20 Description of the device 4.1 Properties and functions Port extender PE-400 Port extenders are modular network components with RJ-45 ports (10/100/1000 Mbps) or SFP transceiver slots. To the left they have an expansion interface to connect to the basic device or to another port extender and to the right they have an expansion interface for additional port extenders.

  • Page 21: Product Overview

    Description of the device 4.2 Product overview Product overview Article numbers Type Properties Article number SCALANCE XM408-4C 8 RJ-45 ports, 4 pluggable transceiver slots, up to 2 port extenders and 6GK5 408-4GP00- 1 function extender, layer 3 with KEY-PLUG 2AM2 8 RJ-45 ports, 4 pluggable transceiver slots, up to 2 port extenders and 6GK5 408-4GQ00- 1 function extender, layer 3 integrated...
  • Page 22 Description of the device 4.2 Product overview Unpacking and checking WARNING Do not use any parts that show evidence of damage If you use damaged parts, there is no guarantee that the device will function according to the specification. If you use damaged parts, this can lead to the following problems: •...

  • Page 23: Accessories

    Description of the device 4.3 Accessories Accessories The following accessories are available for SCALANCE XM-400: KEY-PLUG Type Article number KEY-PLUG XM400 Layer 3 6GK5 904-0PA00 C-PLUG Component Description Article number C-PLUG Configuration plug, exchangeable storage medium for con- 6GK1 900-0AB00 figuration data, 32 MB Configuration plug, exchangeable storage medium for con- 6GK1 900-0AB10...
  • Page 24 Description of the device 4.3 Accessories Type Properties Article number SFP992-1LH+ 1 x 1000 Mbps LC port optical for glass FO 6GK5 992-1AP00-8AA0 cable (single mode) up to max. 70 km SFP992-1ELH 1 x 1000 Mbps LC port optical for glass FO 6GK5 992-1AQ00-8AA0 cable (single mode) up to max.
  • Page 25 Description of the device 4.3 Accessories Function Extender BUS ANALYZER Agent XM-400 Device Properties Article number BUS ANALYZER 4 x internal monitor ports for port mirroring 9AE 4140-2AA00 Agent XM-400 as function extender PoE power supply Type Input voltage Output voltage Output current Article number SCALANCE PS9230...

  • Page 26: Spare Parts

    Description of the device 4.4 Spare parts Spare parts The following spare parts are available for SCALANCE XM-400: Component Description Article number C-PLUG Configuration plug, 6GK1 900-0AB00 exchangeable storage medium for configuration data Spring-loaded terminal block, 4 4-terminal spring-loaded terminal block to connect the pow- 6GK5 980-1DB10-0AA5 terminals er supply (24 VDC),...

  • Page 27: Device Views

    Description of the device 4.5 Device views Device views 4.5.1 SCALANCE XM408-4C The following figure shows an overview of the components of the SCALANCE XM408-4C. ① Electrical ports ② Expansion interface with cover ③ Slots for pluggable transceivers (STP and DCP) ④...

  • Page 28: Scalance Xm408-8C

    Description of the device 4.5 Device views 4.5.2 SCALANCE XM408-8C The following figure shows an overview of the components of the SCALANCE XM408-8C. ① Electrical ports ② Expansion interface with cover ③ Slots for SFP transceivers ④ Location for securing to an S7 standard rail (on the underside of the device, not in figure) ⑤...

  • Page 29: Scalance Xm416-4C

    Description of the device 4.5 Device views 4.5.3 SCALANCE XM416-4C The following figure shows an overview of the components of the SCALANCE XM416-4C. ① Electrical ports ② Expansion interface with cover ③ Slots for SFP transceivers ④ Location for securing to an S7 standard rail (on the underside of the device, not in figure) ⑤...

  • Page 30: Select / Set Button

    Description of the device 4.6 SELECT / SET button SELECT / SET button Position The "SELECT/SET" button is located on the front of the SCALANCE XM-400. Figure 4-1 Position of the "SELECT/SET" button on the SCALANCE XM-400 Setting the display mode To set the required display mode, press the "SELECT/SET"...
  • Page 31 Description of the device 4.6 SELECT / SET button Requirement ● The device is in operation. ● The function "Restore Factory Defaults" is enabled for the "SELECT / SET" button. Note Reset despite disabled "SELECT/SET" button If you have disabled the "Restore Factory Defaults" function for the "SELECT/SET" button in the configuration, this does not apply during the startup phase, see section "Restoring the factory settings (Page 66)".

  • Page 32: Led Display

    Description of the device 4.7 LED display Defining the fault mask Using the fault mask, you specify an individual "good status" for the connected ports and the power supply. Deviations from this status are displayed as errors/faults. To define the fault mask, follow the steps below: 1.

  • Page 33: Rm" Led

    Description of the device 4.7 LED display 4.7.2 "RM" LED The "RM" LED indicates whether or not the device is a redundancy manager and whether or not the ring is operating free of error. LED color LED status Meaning The device is not a redundancy manager. Green The device is a redundancy manager.

  • Page 34: F" Led

    Description of the device 4.7 LED display 4.7.4 "F" LED The "F" LED shows the fault/error status of the device. Meaning during device startup LED color LED status Meaning during device startup Device startup was completed successfully. Device startup is not yet completed or errors have occurred. Flashing There are errors in the firmware.

  • Page 35: Leds "L1" And "L2

    Description of the device 4.7 LED display Setting the display mode To set the required display mode, press the "SELECT/SET" button. If you do not press the "SELECT/SET" button for longer than 1 minute, the device automatically changes to display mode A. Pressing SELECT/SET button LED status Display mode...

  • Page 36: Port Leds

    Description of the device 4.7 LED display 4.7.7 Port LEDs The port LEDs "P1", "P2" etc. show information about the corresponding ports. The meaning of the Port LEDs depends on the set display mode, see section "LEDs "DM1" and "DM2" (Page 34)". Meaning in display mode A In display mode A, the port LEDs indicate whether a valid link exists.
  • Page 37 Description of the device 4.7 LED display Meaning in display mode D In display mode D, the port LEDs indicate whether the port is monitored. LED color LED status Meaning Port is not monitored. If no link was established at the port the signaling contact does not indicate an error.
  • Page 38 Description of the device 4.7 LED display Meaning in display mode C In display mode C, the port LEDs indicate the mode. LED color LED status Meaning Port operating in half duplex mode Green Port operating in full duplex mode Meaning in display mode D In display mode D, the port LEDs indicate whether the port is monitored.

  • Page 39: C-Plug/Key-Plug

    Description of the device 4.8 C-PLUG/KEY-PLUG C-PLUG/KEY-PLUG 4.8.1 Function of the C-PLUG/KEY-PLUG NOTICE Do not remove or insert a C-PLUG/KEY-PLUG during operation A C-PLUG/KEY-PLUG may only be removed or inserted when the device is turned off. Saving configuration data and enabling layer 3 functionality A PLUG is an exchangeable storage medium for storing the configuration data of the device.

  • Page 40: Replacing The C-Plug/Key-Plug

    Description of the device 4.8 C-PLUG/KEY-PLUG Operation with C-PLUG/KEY-PLUG The configuration stored on the C-PLUG/KEY-PLUG is displayed via the user interfaces. If changes are made to the configuration, the device stores the configuration directly on the C-PLUG/KEY-PLUG, if this is in the "ACCEPTED" status. The internal memory is neither read nor written.
  • Page 41 Description of the device 4.8 C-PLUG/KEY-PLUG Replacing a C-PLUG/KEY-PLUG Removing a C-PLUG/KEY-PLUG 1. Turn off the power to the device. 2. Insert a screwdriver between the front edge of the C-PLUG/KEY-PLUG (A) and the slot and release the C-PLUG/KEY-PLUG. 3. Remove the C-PLUG/KEY-PLUG. Inserting a C-PLUG/KEY-PLUG 1.

  • Page 42: Functions

    Description of the device 4.9 Functions Functions 4.9.1 Combo ports Characteristics Combo port is the name for two communication ports. A combo port has the two following jacks: ● a fixed RJ-45 port ● an SFP transceiver slot that can be equipped individually Of these two ports, only one can ever be active.

  • Page 43: Power Over Ethernet (Poe)

    You will find the Operating Instructions here: ● On the data medium that ships with some products: – Product CD / product DVD – SIMATIC NET Manual Collection ● On the Internet pages of Siemens Industry Online Support (http://support.automation.siemens.com/WW/view/en/79730528/133300) SCALANCE XM-400 Operating Instructions, 09/2018, C79000-G8976-C306-08...

  • Page 44: Near Field Communication

    Description of the device 4.9 Functions 4.9.3 Near Field Communication Information on Near Field Communication ● Near Field Communication (NFC) is a wireless communications technique. ● With a mobile end device that supports NFC Forum Type 4 Tags, you can read out information via the SCALANCE XM-400.

  • Page 45: Installation

    Installation Safety notices for installation Safety notices When installing the device, keep to the safety notices listed below. WARNING If a device is operated in an ambient temperature of more than 50 °C, the temperature of the device housing may be higher than 70 °C. The device must therefore be installed so that it is only accessible to service personnel or users that are aware of the reason for restricted access and the required safety measures at an ambient temperature higher than 50 °C.
  • Page 46 Installation 5.1 Safety notices for installation Safety notices for use according to ATEX and IECEx If you use the device under ATEX or IECEx conditions you must also keep to the following safety notices in addition to the general safety notices for protection against explosion: WARNING To comply with EC Directive 2014/34/EU (ATEX 114) or the conditions of IECEx, this enclosure or cabinet must meet the requirements of at least IP54 in compliance with EN...

  • Page 47: Types Of Installation

    Installation 5.2 Types of installation Types of installation Types of installation You have the following options for the device: ● DIN rail ● S7-300 standard rail ● S7-1500 standard rail Installation clearance Observe the following minimum clearances so that the convection ventilation of the device is not blocked: ●...

  • Page 48: Mounting On Din Rails

    Installation 5.3 Mounting on DIN rails Mounting on DIN rails Installation WARNING Danger of injury by falling objects The 35 mm DIN rail does not provide adequate support in shipping or when there is severe vibration (> 10 g). When used under these conditions, the device can detach itself and may cause injury to persons.

  • Page 49: Installation On A Standard S7-300 Rail

    Installation 5.4 Installation on a standard S7-300 rail Removal To remove the device from a DIN rail, follow the steps below: 1. Disconnect all connected cables. 2. Release the DIN rail catch on the bottom of the device using a screwdriver. 3.

  • Page 50: Installation On A Standard S7-1500 Rail

    Installation 5.5 Installation on a standard S7-1500 rail Removal To remove the device from a standard rail, follow the steps below: 1. Disconnect all connected cables. 2. Release the screw on the underside of the standard rail. 3. Remove the device from the standard rail. Installation on a standard S7-1500 rail Installing on an S7-1500 standard rail Figure 5-3...

  • Page 51: Fitting An Extender

    Installation 5.6 Fitting an extender Removal To remove the device from a standard rail, follow the steps below: 1. Disconnect all connected cables. 2. Release the screw on the underside of the standard rail. 3. Remove the device from the standard rail. Fitting an extender Position The following figure shows the elements required to connect two devices.
  • Page 52 Installation 5.6 Fitting an extender Fitting and removing an extender Fitting an extender To fit an extender, follow the steps below: 1. Remove the cover of the expansion interface on the basic device. 2. Fit the two devices together so that the two centering pins are accommodated by the ①...
  • Page 53 Installation 5.6 Fitting an extender To remove an extender, follow the steps below: ① 1. Release the locking device using a screwdriver The two devices are separated from each other. ② 2. Pull the two devices apart in a straight line until the two centering pins are completely out of the openings.

  • Page 54: General Notes For Sfp Transceivers

    WARNING Use only approved SFP transceivers If you use SFP transceivers that have not been approved by Siemens AG, there is no guarantee that the device will function according to its specifications. If you use unapproved SFP transceivers, this can lead to the following problems: •...

  • Page 55: Connecting Up

    Connecting up Safety when connecting up Safety notices When connecting up the device, keep to the safety notices listed below. WARNING The equipment is designed for operation with Safety Extra-Low Voltage (SELV) by a Limited Power Source (LPS). This means that only SELV / LPS complying with IEC 60950-1 / EN 60950-1 / VDE 0805-1 must be connected to the power supply terminals, or the power supply unit for the equipment power supply must comply with NEC Class 2, as described by the National Electrical Code (r) (ANSI / NFPA 70).
  • Page 56 Connecting up 6.1 Safety when connecting up Safety notices on use in hazardous areas General safety notices relating to protection against explosion WARNING EXPLOSION HAZARD Do not connect or disconnect cables to or from the device when a flammable or combustible atmosphere is present.
  • Page 57 Connecting up 6.2 Spring-loaded terminal Further notes WARNING Commissioning devices and replacement devices If you use redundancy mechanisms (HRP/MRP ring redundancy and/or redundant coupling of rings with standby), open the redundant path before you insert a new or replacement device in an operational network. A bad configuration or attachment of the Ethernet cables to incorrectly configured ports causes overload in the network and a breakdown in communication.

  • Page 58: Spring-Loaded Terminal

    Connecting up 6.2 Spring-loaded terminal Spring-loaded terminal The following figure shows the individual components of a spring-loaded terminal: ① Wire inlet For connecting the wire ② Button For releasing the wire ③ Test contact For measuring the voltage Power supply Notes on the power supply WARNING Incorrect power supply...
  • Page 59 Connecting up 6.3 Power supply Information on the power supply ● The "L1" and "L2" LEDs indicate the current range of the power supply, see the section "LEDs "L1" and "L2" (Page 35)". ● The power supply is connected using a 4-pin plug-in terminal block (spring-loaded terminal).

  • Page 60: Signaling Contact

    Connecting up 6.4 Signaling contact Signaling contact Information on the signaling contact ● The signaling contact is a floating switch that signals error statuses by opening the contact. The signaling contact must be operated within the range of the operating voltage. If an error/fault occurs, the signaling contact opens.

  • Page 61: Serial Interface

    Connecting up 6.5 Serial interface Signaling faults ● The signaling of errors by the signaling contact is synchronized with the fault LED "F", see section ""F" LED (Page 34)". All errors that the fault LED "F" indicates (freely configurable) are also signaled by the signaling contact.
  • Page 62 Connecting up 6.5 Serial interface Assignment of the terminal block The supplied connecting cable has the following assignment: Contact Pin assignment of the RJ-11 plug Pin assignment of the D-sub female con- nector TD (Transmit Data) TD (Transmit Data) RD (Receive Data) SG (Signal Ground) RD (Receive Data) SG (Signal Ground)

  • Page 63: Out-Of-Band Interface

    Connecting up 6.6 Out-of-band interface Out-of-band interface Information on the out-of-band interface ● The out-of-band interface is an RJ-45 Ethernet port on the CPU module. The out-of-band interface is not used for routing or switching. ● Access to the device is also possible independent of the other Ethernet ports. ●...

  • Page 64: Functional Ground

    Connecting up 6.7 Functional ground Functional ground Position The functional ground is established via a grounding screw. The connector for the grounding cable is in the center of the underside of the device. Figure 6-5 Position of the grounding bolt on the SCALANCE XM-400 Connecting up functional ground ①...

  • Page 65: Upkeep And Maintenance

    Upkeep and maintenance Downloading new firmware using TFTP without WBM and CLI Firmware The firmware is signed and encrypted. This ensures that only firmware created by Siemens can be downloaded to the device. Procedure with Microsoft Windows Using TFTP, you can supply a device with new firmware even when it cannot be reached using WBM or CLI.

  • Page 66: Restoring The Factory Settings

    Upkeep and maintenance 7.2 Restoring the factory settings Restoring the factory settings NOTICE Previous settings If you reset, all the settings you have made will be overwritten by factory defaults. NOTICE Inadvertent reset An inadvertent reset can cause disturbances and failures in the configured network. Restoring the factory settings during the startup phase NOTICE Reset despite disabled "SELECT/SET"...

  • Page 67: Technical Specifications

    Technical specifications Technical specifications of the SCALANCE XM408-4C The following technical specifications apply to the SCALANCE XM408-4C. Technical specifications Attachment to Industrial Ethernet Electrical connectors Quantity Connector RJ-45 jack Transmission speed 10 / 100 / 1000 Mbps Slots for pluggable transceivers Quantity Connector STP transceiver...

  • Page 68: Technical Specifications Of The Scalance Xm408-8C

    Technical specifications 8.2 Technical specifications of the SCALANCE XM408-8C Technical specifications Permitted ambient conditions Ambient temperature/ During operation up to 2000 m -40 ℃ to +70 ℃ In areas according to UL508 or CSA During operation up to 3000 m -40 ℃...
  • Page 69 Technical specifications 8.2 Technical specifications of the SCALANCE XM408-8C Technical specifications Electrical data Power supply Rated voltage 24 V DC Voltage range 19.2 V DC - 28.8 V DC Design Terminal block, 4 terminals Cable cross-section Minimum 0.75 mm (18 AWG) •...

  • Page 70: Technical Specifications Of The Scalance Xm416-4C

    Technical specifications 8.3 Technical specifications of the SCALANCE XM416-4C Technical specifications of the SCALANCE XM416-4C The following technical specifications apply to the SCALANCE XM416-4C. Technical specifications Attachment to Industrial Ethernet Electrical connectors Quantity Connector RJ-45 jack Transmission speed 10 / 100 / 1000 Mbps Slots for SFP transceivers Quantity Connector...

  • Page 71: Switching Properties

    Technical specifications 8.4 Switching properties Technical specifications Design, dimensions and weight Weight 1250 g Degree of protection IP20 Dimensions (W x H x D) 140 x 150 x 125 mm Installation options Installation on a DIN rail • Installation on an S7-300 standard rail •...
  • Page 72 Technical specifications 8.4 Switching properties Note The number of SCALANCE XM-400 modules connected in a line influences the frame delay. When a frame passes through the switch, this is delayed by the store-and-forward function of the SCALANCE XM-400 by 25-70 microseconds (at 1000 Mbps). SCALANCE XM-400 Operating Instructions, 09/2018, C79000-G8976-C306-08...

  • Page 73: Dimension Drawings

    Dimension drawings SCALANCE XM-400 dimension drawings Note Dimensions are specified in mm. Front view SCALANCE XM-400 Operating Instructions, 09/2018, C79000-G8976-C306-08...
  • Page 74 Dimension drawings 9.1 SCALANCE XM-400 dimension drawings Side view SCALANCE XM-400 Operating Instructions, 09/2018, C79000-G8976-C306-08...
  • Page 75 Dimension drawings 9.1 SCALANCE XM-400 dimension drawings From above SCALANCE XM-400 Operating Instructions, 09/2018, C79000-G8976-C306-08...

  • Page 76: Extender Dimension Drawings

    Dimension drawings 9.2 Extender dimension drawings Extender dimension drawings Note Installing on a rail Remember the following dimensions if you want to mount two devices on a rail. Front view SCALANCE XM-400 Operating Instructions, 09/2018, C79000-G8976-C306-08...
  • Page 77 Dimension drawings 9.2 Extender dimension drawings From above SCALANCE XM-400 Operating Instructions, 09/2018, C79000-G8976-C306-08...
  • Page 78 Dimension drawings 9.2 Extender dimension drawings SCALANCE XM-400 Operating Instructions, 09/2018, C79000-G8976-C306-08...

  • Page 79: Approvals

    You can check which of the following approvals have been granted for your product by the markings on the type plate. Current approvals on the Internet You will find the current approvals for the product on the Internet pages of Siemens Industry Online Support (https://support.industry.siemens.com/cs/ww/en/ps/15315/cert). Notes for the manufacturers of machines The devices are not machines in the sense of the EC Machinery Directive.
  • Page 80 EC L174, 01/07/2011, pages 88-110 You will find the EC declaration of conformity for these products on the Internet pages of Siemens Industry Online Support (https://support.industry.siemens.com/cs/ww/en/ps/15312/cert). The EC Declaration of Conformity is available for all responsible authorities at:...
  • Page 81 Area". You will find this document • on the data medium that ships with some devices. • on the Internet pages of Siemens Industry Online Support (https://support.industry.siemens.com/cs/ww/en/view/78381013). Enter the document identification number C234 as the search term. The SIMATIC NET products described in these operating instructions meet the requirements of the EU directive 2014/34/EU "Equipment and Protective Devices for Use in Potentially...
  • Page 82 Approvals IECEx The SIMATIC NET products described in these operating instructions meet the requirements of explosion protection according to IECEx. Note Type of protection of the device The devices are approved for various types of protection. You can find the type of protection of your device and the IECEx certificate number on the nameplate.
  • Page 83 Approvals RoHS The SIMATIC NET products described in these operating instructions meet the requirements of the EC directive 2011/65/EC for the restriction of the use of certain hazardous substances in electrical and electronic equipment: Applied standard: ● EN 50581 The product meets the requirements of the standards: ●...
  • Page 84 Approvals cULus Approval Hazardous Location cULus Listed I. T. E. FOR HAZ. LOC. Underwriters Laboratories Inc. complying with ● UL 60950-1 (Information Technology Equipment) ● ANSI/ISA 12.12.01-2007 ● CSA C22.2 No. 213-M1987 Approved for use in Cl. 1, Div. 2, GP A, B, C, D T4 Cl.
  • Page 85 Approvals FDA and IEC marking The following devices meet the FDA and IEC requirements listed below: Device CLASS 1 LASER Product SCALANCE XM408-4C SCALANCE XM408-8C SCALANCE XM416-4C * In modular devices, you can find the marking in the operating instructions for the plug-in transceiver or extender used.
  • Page 86 ● "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual (https://support.industry.siemens.com/cs/ww/en/view/27069465) ● "Industrial Ethernet / PROFINET - Passive Network Components" System Manual (https://support.industry.siemens.com/cs/ww/en/view/84922825) ● "EMC Installation Guidelines" configuration manual (https://support.industry.siemens.com/cs/ww/en/view/60612658)

  • Page 87: Index

    Index Function extender, 20, 25 Function Extender BUS ANALYZER Agent XM- 400, 20, 25 Functional ground, 64 Accessories, 23 Approvals, 79 Article number, 21, 23, 24, 24, 25, 25 Glossary, 7 Grounding, 27, 28, 29, 64 Basic device, 19 BUS ANALYZER, 6 BUS ANALYZER Agent XM-400, 6, 20, 25 Installation Installation on a DIN rail, 48...

  • Page 88: Scalance Xm

    Index SFP, 28, 29 STP, 25, 27 Transceiver, 6 PoE, 43, 51 Port extender PE408PoE, 43, 51 PoE power supply, 6, 6, 25, 25, 43, 43, 51, 51 PoE power supply unit, 6, 25, 43, 51 Port extender, 6, 6, 20 WBM, 6, 40, 63, 65 Port extender PE408PoE, 43, 51 Web Based Management, 6, 40, 63, 65...

Table of Contents