Advertisement
Advertisement
Table of Contents
Related Manuals for HP Indigo Series
Summary of Contents for HP Indigo Series
- Page 1 HP Indigo Flexible Packaging Rewinder For HP Indigo press ws4050 and HP Indigo press ws4500 User Guide...
- Page 3 HP Indigo Flexible Packaging Rewinder for HP Indigo press ws4050 and HP Indigo press ws4500 User Guide...
- Page 4 The HP Indigo press is a allowed under the Class 1 Laser Product copyright laws. containing high voltage power supplies and laser The information contained light sources.
-
Page 5: Table Of Contents
Contents 1 Using the flexible packaging rewinder Overview ............2 Turning on the rewinder . -
Page 7: Using The Flexible Packaging Rewinder
Using the flexible packaging rewinder This chapter contains the following sections: Overview Turning on the rewinder Using the touch screen Adjusting the substrate tension Threading the web Turning off the rewinder... -
Page 8: Overview
Overview The flexible packaging rewinder is used to rewind the web. The rewinder: Supports a wide variety of flexible packaging substrates and thin films that are less than 50 µm thick Prevents wrinkles, telescoping, and ink back transferring Can rotate clockwise or counterclockwise Enables you to rewind the web with the print facing the inside or outside of the roll Is controlled from the touch screen Connects to the printing engine through an interface cable... - Page 9 Figure 1-1 shows the main components of the rewinder. Figure 1-1. Rewinder components Riding roller Prevents wrinkles and electrostatic build-up in the final roll. Splicing table Used for splicing the web. Left clamp Holds the substrate in place for splicing. Tension control panel Controls the tension in the rewinder (see "Using the tension control panel"...
-
Page 10: Turning On The Rewinder
Do not attempt to service or repair the rewinder yourself. Call an authorized customer engineer for service and repair of the rewinder. For more safety guidelines, see the "Safety" chapter in CA294-04110 - HP Indigo Press ws4500 User Guide. Turning on the rewinder Turn the main switch. -
Page 11: Using The Touch Screen
Using the touch screen Changing the touch screen language From the Start screen, touch . The Setup menu screen appears. Figure 1-4. Setup menu screen Touch Language. The Language screen appears. Figure 1-5. Language screen Select a language. Touch . The touch screen language changes. Touch Operating the rewinder From the Start screen, touch... - Page 12 To switch between standby and ready modes, touch either Standby On/Off or Ready On/Off. When the rewinder is in standby mode, you can do the following tasks from the first Operator screen: • To raise the right clamp and close the nip cassette, touch the right Up Clamp button.
-
Page 13: Viewing The Alarms And Messages
Viewing the alarms and messages Alarms and messages can appear at the bottom of the Operator screen. Follow the instructions in table 1-2. Table 1-2. Alarms and messages Alarm / message Instructions Factory default values set. Please calibrate Calibrate the dancer. dancer Local emergency stop activated Release the rewinder emergency stop button. -
Page 14: Adjusting The Substrate Tension
Adjusting the substrate tension You can optimize the rewinder performance by adjusting the substrate tension. Using the tension control panel From the tension control panel, you can do the following: To control the tension of the finished roll, adjust the web tension controller. The default setting is 0.5 bar for thin substrates and 2.5 bar for thick substrates. -
Page 15: Using The Meter Counter
Table 1-3. Web tension controller settings Substrate thickness Web tension controller setting 12 - 50 µm 1 - 2 kg/cm (0.5 bar) 50 - 150 µm 2 - 5 kg/cm (1.0 - 2.5 bar) 150 - 250 µm 4 - 7 kg/cm (2.0 - 3.5 bar) Table 1-4. -
Page 16: Threading The Web
Threading the web From the exit of the printing engine, ensure that you have enough web. Thread the web as shown in figure 1-10. Figure 1-10. Threading the web Nip cassette Start of web When the web reaches the nip cassette, touch the right Clamp Down button. The nip cassette opens. -
Page 17: A Obtaining Service
Obtaining service To obtain service, contact the HP Indigo customer care center in your country/region: Europe Austria: +43 (0) 820220310 Belgium: +32 (0) 26264803 France: +33 (0) 149932498 Germany: +49 (0) 6995307080 Italy: +39 (0) 238591081 Ireland: +353 (0) 1 605 8409... - Page 20 Copyright © 2007 Hewlett-Packard Company This is an HP Indigo digital print. Printed in Israel. www.hp.com/go/indigo reorder: P/N CA294-05790...