Table of Contents
Advertisement
1. Raise the Needle to the Highest Point.
2. Loosen the thumb screw that secures the needle.
3. Remove the old needle and insert the new one.
4. Hand tighten the thumb screw while holding the Needle in place.
Note: Change the needle if it gets bent or if it begins to get dull.
(refer to pg. 33 for Needle Info)
Old
Needle
Cleaning Tension Discs
1. Remove thread.
2. Remove all lint and thread remnants.
Note: You can use canned/compressed air to
clean this area.
Note: Lint build up between the tension discs can
prevent you from being able to properly tension
your thread.
Changing A Needle
* Hand tighten
Needle
Thumb
Needle Thumb
Screw
Screw only.
Separate the
tension discs and
clear them of lint
and debris
27
*The eye of
the needle
faces the
bobbin
opening
*Be sure to install the needle
with the scarf (indent) toward
the throat of your machine.
Needle
Thumb
Screw
New
Needle
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
