Page 1
Instruction manual SCPH-77006 SCPH-77007 Before using this product, carefully read this manual and retain it for future reference. 2-697-297-71(1)
WARNINGS To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire or shock hazard, do not place a container filled with liquids on top of the console. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
Table of contents WARNINGS ... 2 Precautions ... 4 Preparation Getting started ... 7 Part names... 8 Connecting to a TV ... 9 Connecting digital audio equipment ... 11 Connecting the controller... 11 Connecting the AC adaptor and AC power cord ... 12 Turning the console on and off ...
Precautions This product has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential for causing fire, electrical shock or personal injury. To help ensure accident-free operation, follow these guidelines: • Observe all warnings, precautions and instructions. •...
Page 5
Use and handling • Do not throw or drop the console or accessories, or expose them to strong physical shock. • Do not place the console or accessories on surfaces that are unstable, tilted or subject to vibration. • Do not expose the console or accessories to high temperatures, high humidity or direct sunlight (use in an environment where temperatures range from 5°...
Page 6
Connecting with a network cable Do not connect network cables or telephone cords of the following types to the network connector: • Network cables not appropriate for use with a 10Base-T/100Base-TX network • Standard residential telephone lines • Any ISDN (digital) compatible phone or data line •...
SCPH-77007)...1 (supplied with SCPH-77006)...1 s Instruction manual...1 Removing the 3-pin converting adaptor (SCPH-77006 only) Electrical outlet configuration may vary depending on the region of use. If the plug on the supplied AC power cord does not match the electrical outlet, loosen the screw and remove the converting adaptor.
Caution Do not place the console in locations where it may be exposed to the following conditions: • Places subject to excessive cigarette smoke or dust. Cigarette smoke residue or dust build-up on the internal components, such as the lens, may cause the console to malfunction.
PlayStation 2 console rear ® NETWORK connector DIGITAL OUT (OPTICAL) connector Note For part names of the analog controller (DUALSHOCK controller (DUALSHOCK 2)" ( page 16). ® Connecting to a TV Rear vent Before connecting • Do not plug the AC power cord for the console into an electrical outlet until you have made all other connections.
Page 10
Caution If you display a still image on a plasma or projection* TV screen for an extended period of time, "ghosting" may occur. This is a characteristic of these types of TVs. Static, non-moving images, such as console setting menus, DVD menus or paused images, may leave a faint image permanently on the TV screen if left on for an extended time.
Connecting digital audio equipment By using a commercially available optical digital cable, you can enjoy surround sound with the effect of being in a movie theater or a concert hall. When connecting the console to audio equipment with digital connectors, refer to the instructions supplied with the device to be connected.
Connecting the AC adaptor and AC power cord Warnings • The socket-outlet shall be installed near the equipment and shall be easily accessible. • Do not plug the AC power cord for the console into an electrical outlet until you have made all other connections.
Turning the console on and off Before turning on the console Do not turn on the console until you have finished these steps. Refer to the instructions supplied with your TV for details. • Turn on the TV. • Change your TV setting to display output from the line to which the console is connected.
Games Playing a game Before playing a game Check that the connections to the TV and audio equipment are correct and that the precautions have been met. • "Precautions" ( page 4) • "Connecting to a TV" ( page 9) •...
Close the disc cover. Press down on the middle of the disc cover to close it. After the disc cover is closed, the game will start. Notes • You can also start a game from the Browser screen ( • If you turn on the console after inserting a disc, the game will start automatically. To reset a game Press the \/1 (on/standby)/RESET button on the console front.
Page 16
Using the analog controller (DUALSHOCK The analog controller (DUALSHOCK sensitive button function. It also has a vibration function. Part names SELECT button L2 button L1 button Directional buttons Mode indicator ANALOG mode button * The left and right analog sticks, or the L3 and R3 buttons, function only in analog mode (indicator: red).
(SCPH-10020 G) Memory card (SCPH-1020) Note The memory card (8MB) (for PlayStation helps protect copyrighted content through data encryption and hardware authentication. by Sony Corporation. bearing the "MagicGate" trademark. Compatible software Amount of memory PlayStation 2 format Approx. 8 MB ®...
Page 18
Inserting a memory card Insert the memory card into a MEMORY CARD slot on the console front. MEMORY CARD Note Some software titles designate a specific MEMORY CARD slot to use. Refer to the instructions supplied with the software for details. Saving or loading game data Depending on the software, the procedure for saving or loading may vary.
Audio CDs Playing an audio CD Playing a CD Turn on the console and insert the disc ( Follow steps 1 to 4 of "Starting a game". The track numbers are displayed. Using the directional buttons, select the track number you want to play and then press the button.
Page 20
Ending audio CD playback Using the directional buttons, select x and then press the button. Playback stops. Press the A (open) button on the console front to remove the disc. Playing in various modes You can set for "Play Mode" and "Repeat". Play Mode Normal Plays tracks as recorded on the CD...
DVDs Watching a DVD You can operate the DVD player using the following methods. • Using the on-screen Control Panel • Operating directly using the analog controller (DUALSHOCK • Using the DVD remote control (for PlayStation The following instructions assume use of the Control Panel to operate the DVD player.
Page 22
Icon Returns to the previously selected screen Return within the DVD's menu Displays and changes audio options on Audio Options DVDs with multiple audio tracks Displays and changes viewing angles on Angle Options DVDs recorded with multi-angle options Displays and changes subtitle options on Subtitle Options DVDs with subtitle options Skips to the selected title, chapter or the...
Page 23
Playing a DVD Turn on the console and insert a disc ( Follow steps 1 to 4 of "Starting a game". Playback begins. Notes • If you turn on the console after inserting a disc, playback will begin automatically. • You can also start playback from the Browser screen ( Ending DVD playback During playback, select x in the Control Panel ( and then press the...
Page 24
Finding a particular point on a DVD (Search) You can search either forwards or backwards to quickly locate a particular point on a DVD. During playback, select page 21) and then press and hold the Search speed changes as shown below when you press either the up or down directional button while holding down the •...
Selecting Original or Play List for DVD-RW playback When using a DVD-RW disc (VR mode), you can select the type of titles you want to play. With playback stopped, select page 21) and then press the button. Original and Play List will be selected in turn each time you press the button.
Page 26
Select the chapter number, and then press the To play all the chapters, select "All". Repeat steps 2 to 4 to set other titles or chapters. Press the START button. Program Play begins. Note The setting will not be cleared after Program Play finishes. Shuffle Play You can set this option for random playback of all titles or chapters recorded on a disc.
Clearing playback modes Clears playback modes to allow normal playback. Select in the Control Panel ( press the button. A message stating, "Play mode contents cleared", is displayed and the console returns to normal playback. Note If multiple playback modes have been set in a combination, all playback modes are cleared.
Page 28
Select the desired setting, and then press the The setting of the item is completed. For details, see the instructions for each item ( pages 28 to 33). Notes • The default setting for each menu item is underlined in the explanations below. •...
Page 29
DNR (Digital Noise Reduction) You can use this setting to help reduce roughness in the on-screen image and produce a cleaner picture. DNR is not used. DNR1 Increases picture quality DNR2 Increases picture quality (maximum) Notes • "DNR2" is more effective for reducing image roughness than "DNR1", but in some cases an afterimage may appear.
Page 30
Setting viewer options Pause mode You can use this option to set the picture status when playback is paused. Auto A picture with moving elements is displayed without jitter. Normally select this position. Frame A picture without moving elements can be displayed at high resolution. Parental Control In some regions, the viewing of some DVD content may be restricted based on viewer age or other factors.
Page 31
Region code list To enter a Parental Control region code, select "Other" in step 4 of "Setting Parental Control" ( page 30). Use the directional buttons to select the first letter, and then press the right directional button. Then select the next letter and press the button.
Page 32
Setting sound options Audio Digital Out You can switch the method of outputting the audio signal when you connect the following audio devices to the DIGITAL OUT (OPTICAL) connector. Caution When the console is connected to an audio device without a Dolby Digital, DTS or MPEG decoder, set "Dolby Digital", "DTS"...
Page 33
Audio Track Auto Select Mode This setting gives priority to the audio track that contains the highest number of channels when you play a DVD on which multiple audio formats (PCM, Dolby Digital, DTS or MPEG) are recorded. If PCM, Dolby Digital, DTS and MPEG have the same number of channels, the console selects PCM, Dolby Digital, DTS and MPEG audio tracks in that order.
Main menu Displaying the main menu From the main menu, you can access information and change various settings. You can also move to the following screens from the main menu. The main menu is displayed when you turn on the console without a disc inserted.
Select an icon, and then press the • When you select the memory card icon, icons for data saved on the memory card are displayed. To copy or delete game save data, see "Copying or deleting game data" ( page 18). •...
Page 36
Notes • The default setting for each menu item is underlined in the explanations below. • Changes to each setting are saved and remain in effect even after you turn off or reset the console. Clock Adjustment You can set the date and time. Use the directional buttons to set "Year", "Month", "Day", "Hour", "Minute"...
® Browser screen, System Configuration menu, and Version Information screen. Traditional Chinese English 2 or ® ® Displays messages in Traditional Chinese (default setting for SCPH-77007) Displays messages in English (default setting for SCPH-77006) Using the System Configuration menu...
Using the Version Information screen You can check version information for various console components by selecting this option. You can also change optional settings for some items. At the main menu ( page 34), press the The Version Information screen is displayed. Optional settings Optional settings are available for "Console", "PlayStation "DVD Player".
PlayStation Driver ® You can set the PlayStation Driver program to optimize performance of ® PlayStation format software. ® Note The settings will automatically return to the default settings in the following case: – When the console is turned off Disc Speed Standard Loads discs at normal speed...
Page 40
Close the disc cover. Playback begins. Note The setting will not be cleared if 1) you do not start a DVD after step 4 or 2) you reset or turn off the console before step 6. Using the Version Information screen...
Networking Connecting to a network You can enjoy online games by connecting the PlayStation network. To play online games, you will need the following: • An online game disc • A Broadband Internet connection* • A commercially available network cable •...
Page 42
Connecting the console Warning Do not plug the AC power cord for the console into the electrical outlet until you have made all other connections. Connect the network cable to the network connector on the console rear. Console rear Commercially available network cable Insert the connector on the network cable to the network device.
Creating network settings After you have connected a network cable to the console, you will need to create and save network settings. Actual network settings may vary depending on the online game being played. Refer to the instructions supplied with the software for details. Items you will need To create a network setting, you will need the following items: •...
Additional information Compatible software You can play discs of the following types on the PlayStation Disc type Disc logo PlayStation 2 format DVD-ROM " ® [12 cm, Silver] PlayStation 2 format CD-ROM " ® [12 cm, Blue] PlayStation format CD-ROM PlayStation ®...
Accessories Optional accessories are available for this model of the PlayStation console. When using optional accessories, be sure to purchase those that are compatible with this model of the PlayStation PlayStation service line at the number listed on your warranty card for ®...
WARRANTY Refer to the enclosed document for region-specific warranty information. WARRANTY Specifications General Power requirements DC IN 8.5V Electrical current consumption 5.3 A (approx.) Console dimensions (approx.) 230 × 28 × 152 mm / 9 × 1 × 6 in (w/h/d) Console mass (approx.) 900 g Signal format...
Page 47
AC adaptor Power requirements 100-240 V AC, 50/60 Hz Voltage/electrical current 8.5 V, 5.65 A output (approx.) Adaptor dimensions (approx.) 60 × 28 × 124 mm / 2 Adaptor mass (approx.) 350 g Supplied accessories page 7 Design and specifications are subject to change without notice. Copyrights This product incorporates copyright protection technology that is protected by method claims of certain U.S.
Troubleshooting Go through this section if you experience difficulty in operating the PlayStation 2 console. Should any problem persist, call the PlayStation ® service line at the number listed on your warranty card for assistance. Check the following items first: •...
Page 49
, See also "There is no picture on the TV screen" and "Picture noise appears on the TV screen". The aspect ratio does not change even when playing the DVD with the aspect ratio setting adjusted and/or playing 16:9 pictures of a DVD. , Depending on the DVD, the aspect ratio cannot be changed.
Page 50
Operation The controller does not function. , If the software title is compatible only with the analog controller (DUALSHOCK 2), it will not work properly with the analog controller ® (DUALSHOCK ). Use a controller that is appropriate for the software title. ®...
Page 51
Enter the number "7444". The registered password is cleared, and the screen for registering a password is displayed. Enter a new password ( page 30). Some functions are not available. , Depending on the DVD, some functions may not be available: •...
Page 52
警告 為減少發生火災或觸電的風險,切勿於讓本製品淋雨或置於潮濕場 所。 為了避免發生火災或觸電,請勿將倒入液體的容器放置於主機上。 為了避免觸電, 請勿擅自打開機殼。 維修應委託持有執照的專業技術 人員進行。 注意 使用本機中的光學儀器將增加對眼睛的傷害,因此不可擅自拆卸機 殼。維修應委託持有執照的專業技術人員進行。 使用 PlayStation 2 前務必閱讀以下的注意事項 ® 有極少部分的人,當看到閃光或受強烈的光線照射時會引發癲癇或昏迷等症 狀。這種人當觀看電視 (包括 DVD)或觀看如這架 PlayStation 的畫面時,有時會出現癲癇發作的情形。即使至今未曾有過類似發作經驗的 人,亦有遭遇上述症狀之可能。 如果您過去曾經罹患癲癇,或是曾經有過眼花撩亂、痙攣、癱瘓、昏迷不醒、 精神錯亂或極度興奮等發作經驗的話,在使用本機之前,請先接受醫生的診 斷治療。 廢電池請回收 (僅適用於台灣) 警告 某些 PlayStation 或 PlayStation ® 時, 出現某些操作與使用以往版本的 PlayStation 相比略顯差異,或無法正常執行之情形。如果您需要更多資訊,請就近與保 證書上記載的 PlayStation ®...
連接搭配數碼端子的音響設備 使用市售的光纖數碼連接線,您可以欣賞到有如置身電影院或音樂 廳般的臨場效果。 當將主機連接至搭配數碼端子的音響設備時, 請參 閲所連接設備的使用説明書。 主機背面 所連接的設備 DIGITAL IN OPTICAL 市售的光纖數碼連接線 注意事項 • 使用光纖數碼連接線將主機連接至音響裝置時, 某些 PlayStation 軟件可能會出現無法播放聲音的異常現象。如果發生此情況,請使用附帶 的 AV 連接線 (音頻 / 視頻一體化) ,並將其連接至主機的 AV MULTI OUT (AV 多重輸出)端子而不要使用光纖數碼連接線。 • 連接數碼音響裝置後,請選擇系統設定選單,將 “DIGITAL OUT (OPTICAL)” (光纖數碼輸出)設定為 “開” 。詳細説明,請參閱 “DIGITAL OUT (OPTICAL)” (光纖數碼輸出) ( 連接控制器...
觀賞 DVD 您可以使用以下方法操作 DVD 播放機。 • 使用畫面上顯示的控制面板 • 使用類比控制器 (DUALSHOCK 2)直接操作 ® • 使用 PlayStation 2 專用 DVD 遙控器 (選購品) ® 以下説明為假設使用控制面板操作 DVD 播放機。視所使用的方法而 定,有些操作可能不同。 注意事項 • 有關播放 DVD 的詳細説明,請參閲 DVD 附帶的説明書。 • PlayStation 2 主機會依據 DVD 中設定的內容而進行播放。 但部份 DVD 的設 ®...
附屬品 選購品適用於 PlayStation 2 主機的此機型。 當使用選購附屬品時, ® 必須購買那些與本 PlayStation ® 詢問有關周邊機器的機型對應問題,請聯絡保證書上記載的 「消費 者服務中心」 。 與本 PlayStation 2 主機機型不相容的附屬品 ® 下列附屬品與本 PlayStation 2 主機機型不相容 : ® 型號 產品名稱 SCPH-10090 G PlayStation SCPH-1070 G (對戰)多重連接器 SCPH-10040 G PlayStation SCPH-10110 G PlayStation 使用 i.LINK 和...
維修責任 請查閲附帶的文件,以了解地區特定的維修責任資訊。 規格 一般規格 電源要求 DC IN 8.5V 電流消耗 (大約) 5.3 A 主機尺寸 (大約) 152 mm / 9 × × (寬 / 高 / 深) 主機質量 (大約) 900 g 信號格式 NTSC 操作溫度 5° C 至 35° C / 41° F 至 95° F 主機前面的輸入...
Page 104
" ", " ", "PlayStation", "DUALSHOCK" and " "SONY" is a registered trademark, and " " and "MagicGate" are trademarks of Sony Corporation. “ ” 、 “ ” 、 “PlayStation” 、 “DUALSHOCK”和 “ “SONY”為 Sony Corporation 之註冊商標。 “ ”和 “MagicGate”則為該公司之商標。...