Table of Contents
Advertisement
Front Panel Components
Table 51:
LED
Color
SYS
Green/Amber/Red
STAT
Green
PWR
Green/Red
0
PWR
Green/Red
1
Reset Button
The front panel of the vEdge 2000 router has a reset button. The reset button is recessed to avoid accidentally
pressing it while the router is operational. To press the reset button, use a sharp narrow tool. Table 2 describes
the effects of pressing the reset button.
Table 52:
Press
Duration
Short press
Long press
SD Card Slot
The front panel of the vEdge 2000 router has an SD card slot. The SD card slot has the following specifications:
• High speed bus: maximum 25 MB/second
• Supported card types: SD, SDHC
Hardware Installation Guide for vEdge Routers
164
Description
• Off: System is not on
• Green: System is healthy and operating fine
• Blinking Green: System is booting up
• Red: Major failure or alarm is present
• Off: Status of OMP to vSmart controller is down
• Green: Status of OMP to vSmart controller is up
• Off: Power supply unit 0 is not present (or router is not
powered)
• Green: 12-Volt output is OK on power supply unit 0
• Red: Fault on power supply unit 0
• Off: Power supply unit 1 is not present (or router is not
powered)
• Green: 12-Volt output is OK on power supply unit 1
• Red: Fault on power supply unit 1
Behavior
Pressing for two seconds resets and reboots the router.
Pressing for 10 seconds resets the router and reboots it with factory default configuration.
vEdge 2000 Router
Advertisement
Table of Contents
Troubleshooting
