Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Siemens SIMATIC NET MM900 Series
Summary of Contents for Siemens SIMATIC NET MM900 Series
- Page 3 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
- Page 4 Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol.
-
Page 5: Table Of Contents
Table of contents Introduction ....................3 Description ....................4 Type designation ............... 4 Product characteristics .............. 5 Unpacking and checking ............6 Installation ....................6 Technical data ....................9 Mechanical and electrical data ..........9 Cable lengths of the MM900 media modules for SCALANCE XR-500M ............. 13 Other properties .............. -
Page 6: Description
Description Description Type designation Structure of the type designation The type designation an MM900 media module for SCALANCE X-500 consists of several parts with the following meaning: Interface Property 10/100/1000 Mbps RJ-45 port electrical. 10/100/1000 Mbps RJ-45 port electrical with securing collar. 100/1000 Mbps SFP media module. -
Page 7: Product Characteristics
Description Product characteristics Media modules Type Properties Article number MM991-4 4 x 100 Mbps, ST ports optical, multi- 6GK5 991-4AB00- mode fiber-optic cable, up to max. 5 km. 8AA0 MM991-4LD 4 x 100 Mbps, ST ports optical, single 6GK5 991-4AC00- mode fiber-optic cable, up to max. -
Page 8: Unpacking And Checking
1. Make sure that the package is complete. 2. Check all the parts for transport damage. If the consignment is incomplete or if there is damage to the exterior, contact your supplier or your local Siemens office. Installation NOTICE Failure of the data traffic due to contamination of optical plug-in connections Optical sockets and plugs are sensitive to contamination of the end face. - Page 9 Installation Note Slots for PoE modules PoE modules can only be used in slots1, 2 and 3. Note The names and labeling of the media modules differ Example: The device is called, for example MM992-4SFP [6GK5 992-4AS00-8AA0], the labeling on the device is 9924AS. Note Factory settings of the media modules When inserting a media module, the parameters of the ports are set to the factory...
- Page 10 Installation Plugging in media module Figure 3-1 Plugging a media module into a SCALANCE XR552-12M. SCALANCE XR528-6M is used analogously. Follow the steps below to plug an MM900 media module into a SCALANCE XR500: 1. Remove the dummy covers of the device slot into which you want to insert a media module.
-
Page 11: Technical Data
Technical data Pulling a media module To pull a media module, follow the same steps as when plugging, but in the reverse order: 1. Pull out the handle of the media module. 2. Pull the media module out of the device slot. 3. - Page 12 Technical data Interfaces Media module Interfaces MM992-4CU 4 x 10/100/1000 Mbps, RJ-45 ports electrical. MM992-4CUC 4 x 10/100/1000 Mbps, RJ-45 ports electrical with securing collar. MM992-4SFP 4 x 100/1000 Mbps, SFP media module. MM992-4PoE 4 x 10/100/1000 Mbps, PoE ports electrical, max 60 W. MM992- 4 x 10/100/1000 Mbps, PoE ports electrical, with securing collar, 4PoEC...
- Page 13 Technical data Permitted ambient conditions Environmental conditions Transportation/storage tem- -40 to +70 °C perature Operating temperature 0 to +60 °C Maximum relative humidity < 95 % no condensation in operation at 25 °C 2000 m at max. 56 °C Operating altitude above •...
- Page 14 Technical data Electrical data: Transmitter output (optical) and receiver input Media module Transmitter output (optical) Receiver input min. [dBm] max. [dBm] Sensitivity min. Input power [dBm] max. [dBm] MM992-4CU MM992-4CUC MM992-4SFP MM992-4PoE MM992- 4PoEC MM991-4 MM991-4LD MM992-4 -9.5 MM992-4LD -9.5 Electrical data: Galvanic isolation with PoE modules Media module Electrical isolation...
-
Page 15: Cable Lengths Of The Mm900 Media Modules For Scalance Xr-500M
Technical data Cable lengths of the MM900 media modules for SCALANCE XR-500M Permitted cable lengths (copper cable) Media module Property Lead Permitted cable length MM992-4CU 4 x 10/100/1000 IE TP torsion cable 0 ... 45 m MM992-4CUC Mbps, with + 10 m TP cord RJ-45 ports electri- IE FC Outlet RJ-45 MM992-4PoE... - Page 16 Technical data Permitted cable lengths (fiber-optic cable) for the SFP media module Media module Property Max. permittted cable length MM992-4SFP 4 x 100/1000 Mbps, Depending on the SFP trans- SFP media module ceiver used Permitted cable lengths (fiber-optic cable - Fast Ethernet) Media module Property Fiber...
-
Page 17: Other Properties
Dimension drawings Other properties Table 4-1 Mean time between failure (MTBF) Device version (power supply) MTBF MM992-4CU > 200 years MM992-4CUC MM991-4, > 90 years MM991-4LD > 70 years MM992-4LD > 75 years MM992-4 > 85 years MM992-4SFP > 170 years MM992-4PoE >... - Page 18 Dimension drawings View from the front, top, and side (right) Dimensions are specified in mm. MM900 media modules for SCALANCE XR-500M A5E03275846-04, 11/2015...
-
Page 19: Approvals
Approvals The SIMATIC NET products described in these Operating Instructions have the approvals listed below. Note Note that the media modules meet the requirements of the approvals only in combination with the devices. Note The specified approvals apply only when the corresponding mark is printed on the product. - Page 20 The current descriptions of the currently available products can always be found on the Internet under the specified entry IDs/Internet pages: – SIMATIC NET Industrial Ethernet Network manual ID = 27069465 (http://support.automation.siemens.com/WW/view/en/27069465) – EMC Installation Guideline, Planning Guide ID = 28518276 (http://support.automation.siemens.com/WW/view/en/28518276) –...
- Page 21 You will find this document on the data medium that ships with some devices. • on the Internet pages of Siemens Industry Online Support. • Enter the document identification number C234 as the search term. SIMATIC NET products meet the requirements of the EC directive:94/9/EC "Equipment and Protective Devices for Use in Potentially Explosive Atmospheres".
- Page 22 Cl. 1, Zone 2, GP IIC T4 Report no. E240480 EU declaration of conformity You will find EC declaration of conformity for these products on the Internet pages of Siemens Industry Online Support. See also ID = 57026840 (http://support.automation.siemens.com/WW/view/en/57026840) http://support.automation.siemens.com/WW/view/en/67218133 (http://support.automation.siemens.com/WW/view/en/67218133)
- Page 23 FDA and IEC approvals Trademarks All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.