Mounting Tray With A Magnet - Cisco Catalyst 2960-L Series Hardware Installation Manual
8-port and 16-port switch
Hide thumbs
Also See for Catalyst 2960-L Series:
- Getting started manual (20 pages) ,
- Installation manual (22 pages) ,
- Hardware installation manual (72 pages)
Table of Contents
Advertisement
Switch Installation
Step 5
Use the two number-10 Phillips pan-head screws to secure the switch to the mounting tray.
Figure 17: Securing the Switch to the Mounting Tray
Warning
To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 3 in. (7.6 cm)
Statement 1076
Mounting Tray with a Magnet
You can use a magnet with the mounting tray to mount the switch on a metal surface.
Caution
Do not use the magnet without a mounting tray
This example shows you how to mount the switch on a metal wall. You can use a similar procedure to mount
the switch on, or under, a metal desk.
Step 1
Place the switch on the mounting tray.
Cisco Catalyst 2960-L Series 8-Port and 16-Port Switch Hardware Installation Guide
Mounting Tray with a Magnet
25
Hide quick links:
Advertisement
Table of Contents
