Other important information Battery installation Charging the sub monitor Wall mounting Registering the product to the Video Intercom System Cleaning Specifications Thank you for purchasing a Panasonic product. Please read this manual before using the product and save it for future reference.
Introduction This product is an additional product designed to be used with the following Panasonic Video Intercom Systems. – VL-SWD501AZ/VL-SWD501UAZ (Main monitor station: VL-MWD501BX) (The corresponding models are subject to change without notice.) You must register this product with your Video Intercom System before it can be used.
Preventing accidents For your safety R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do To prevent severe injury and loss of life/property, read so. Hospitals or health care facilities may be using this section carefully before using the product to ensure equipment that could be sensitive to external RF proper and safe operation of your product.
R Risk of explosion if battery is replaced by Charging the sub monitor incorrect types. Dispose of used batteries according to the instructions. Only connect the charger with the supplied Panasonic AC adaptor (® page 2). Repairing, transferring, disposing, or returning the product...
Note: AC adaptor connections R When the sub monitor is off the charger or the AC adaptor is disconnected for 1 week or more, remove the batteries in order to maintain battery performance and prevent the batteries from discharging. – Recharge the batteries before using the sub monitor again.
Dimensions Approx. 43´81´76 Cleaning (mm) (height ´ (excluding protruding sections) width ´ depth) Wipe the product with a soft, dry cloth. Mass (weight) Approx. 70 g (excluding the AC For excessive dirt, wipe the product with a slightly damp adaptor) cloth.