hit counter script
Siemens SIMOTICS M-1PH8 Commissioning Instructions
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Engine
  5. SIMOTICS M-1PH8
  6. Commissioning instructions
Siemens SIMOTICS M-1PH8 Commissioning Instructions

Siemens SIMOTICS M-1PH8 Commissioning Instructions

Premium performance main motors for sinamics s120
Hide thumbs Also See for SIMOTICS M-1PH8:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Instructions & Installation Instructions

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIMOTICS M-1PH8

Summary of Contents for Siemens SIMOTICS M-1PH8

  • Page 3 ___________________ Commissioning instructions for Introduction SIMOTICS M-1PH8 Premium Fundamental safety ___________ instructions for the SIMOTICS documentation Performance SIMOTICS ___________________ Installing the motor Parameter ___________________ Drive technology assignment/addressing Commissioning instructions for SIMOTICS M-1PH8 ___________________ Converter data sheets and characteristics Premium Performance...
  • Page 4 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 5: Introduction

    1PH8 Premium Performance motor and the commissioning manual for the SINAMICS S120 converter. Siemens strives continually to improve the quality of information provided in its manuals and instructions. ● If you find any mistakes or would like to offer suggestions about how this document could be improved, contact the Siemens Service Center.
  • Page 6 The following link provides information on how to create your own individual documentation based on Siemens content, and adapt it for your own machine documentation: http://www.siemens.com/mdm Training The following link provides information on SITRAIN - training from Siemens for products, systems and automation engineering solutions: http://siemens.com/sitrain Technical Support...
  • Page 7 Introduction Internet addresses for drive technology Internet address for motors: http://www.siemens.com/motors Internet address for products: http://www.siemens.com/motioncontrol Internet address for SINAMICS: http://www.siemens.com/sinamics Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 8 Introduction Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 9: Table Of Contents

    1PH8081-1_U2 (fp = 4 kHz) ....................96 5.2.2 1PH8081-1_T2 (fp = 4 kHz) ....................100 5.2.3 1PH8081-1_V2 (fp = 8 kHz) ....................104 5.2.4 1PH8081-1_W2 (fp = 8 kHz) ....................108 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 10 Table of contents 5.2.5 1PH8083-1_T2 (fp = 4 kHz) ....................112 5.2.6 1PH8083-1_U2 (fp = 4 kHz) ....................116 5.2.7 1PH8087-1_U2 (fp = 4 kHz) ....................120 Index ..............................125 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 11: Fundamental Safety Instructions For The Simotics Documentation

    • Only use power supplies that provide SELV (Safety Extra Low Voltage) or PELV- (Protective Extra Low Voltage) output voltages for all connections and terminals of the electronics modules. Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 12 When opening plug connections in operation, arcs can result in severe injury or death. • Only open plug connections when the equipment is in a no-voltage state, unless it has been explicitly stated that they can be opened in operation. Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 13 Note Important safety notices for Safety Integrated functions If you want to use Safety Integrated functions, you must observe the safety notices in the Safety Integrated manuals. Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 14 Inadequate cooling can cause overheating resulting in death or severe injury as a result of smoke and fire. This can also result in increased failures and reduced service lives of motors. • Comply with the specified coolant requirements for the motor. Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 15: Handling Electrostatic Sensitive Devices (Esd)

    – Wearing ESD shoes or ESD grounding straps in ESD areas with conductive flooring • Only place electronic components, modules or devices on conductive surfaces (table with ESD surface, conductive ESD foam, ESD packaging, ESD transport container). Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 16: Industrial Security

    Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept.

  • Page 17: Residual Risks During The Operation Of Electric Motors

    5. Release of noxious substances and emissions in the case of improper operation and/or improper disposal of components Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 18 Fundamental safety instructions for the SIMOTICS documentation 1.1 Fundamental safety instructions Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 19: Installing The Motor

    Installing the motor Install the motor in accordance with the operating instructions and the commissioning instructions for the SINAMICS S120 converter. Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 21: Parameter Assignment/Addressing

    Unexpected movements can cause death, severe injury or damage to property. • Fully parameterize the converter. • Do not switch the motor on until parameterization has been completed. Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 22 – the reference variables p2000, p2002 and p2003 and – the hysteresis speed p2162 Following Step 10, continue commissioning in the familiar way (e.g. take account of load inertia, and optimize speed and position controllers) Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 23: Converter Data Sheets And Characteristics

    Motor rotor leakage inductance/damping p358 0.816 0.816 inductance d axis Motor magnetizing inductance/magnetizing p360 9.000 9.000 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 24 Modulator configuration p1810 &H800 &H800 Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 25 Motor rotor leakage inductance/damping p358 0.816 0.816 inductance d axis Motor magnetizing inductance/magnetizing p360 9.000 9.000 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 26 Modulator configuration p1810 &H800 &H800 Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 27 Motor rotor leakage inductance/damping p358 0.816 0.816 inductance d axis Motor magnetizing inductance/magnetizing p360 9.000 9.000 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 28 Modulator configuration p1810 &H800 &H800 Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 29: 1Ph8081-1_V0_1 (Fp = 8 Khz)

    Motor rotor leakage inductance/damping p358 1.000 1.000 inductance d axis Motor magnetizing inductance/magnetizing p360 6.610 6.610 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 30 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 12.5 12.5 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 31 Motor rotor leakage inductance/damping p358 1.000 1.000 inductance d axis Motor magnetizing inductance/magnetizing p360 6.610 6.610 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 32 Modulator configuration p1810 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 33 Motor rotor leakage inductance/damping p358 1.000 1.000 inductance d axis Motor magnetizing inductance/magnetizing p360 6.610 6.610 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 34 Modulator configuration p1810 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 35: 1Ph8081-1_W0_1 (Fp = 8 Khz)

    Motor rotor leakage inductance/damping p358 0.816 0.816 inductance d axis Motor magnetizing inductance/magnetizing p360 9.000 9.000 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 36 Modulator configuration p1810 &H800 &H800 Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 37 Motor rotor leakage inductance/damping p358 0.816 0.816 inductance d axis Motor magnetizing inductance/magnetizing p360 9.000 9.000 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 38 Modulator configuration p1810 &H800 &H800 Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 39 Motor rotor leakage inductance/damping p358 0.816 0.816 inductance d axis Motor magnetizing inductance/magnetizing p360 9.000 9.000 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 40 Modulator configuration p1810 &H800 &H800 Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 41: 1Ph8083-1_V0_1 (Fp = 8 Khz)

    Motor rotor leakage inductance/damping p358 0.498 0.498 inductance d axis Motor magnetizing inductance/magnetizing p360 6.500 6.500 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 42 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 67.8 67.8 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 43 Motor rotor leakage inductance/damping p358 0.498 0.498 inductance d axis Motor magnetizing inductance/magnetizing p360 6.500 6.500 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 44 Modulator configuration p1810 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 45: 1Ph8083-1_W0_1 (Fp = 8 Khz)

    Motor rotor leakage inductance/damping p358 0.792 0.792 inductance d axis Motor magnetizing inductance/magnetizing p360 14.200 14.200 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 46 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 67.8 67.7 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 47 Motor rotor leakage inductance/damping p358 0.792 0.792 inductance d axis Motor magnetizing inductance/magnetizing p360 14.200 14.200 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 48 Modulator configuration p1810 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 49: 1Ph8087-1_V0_1 (Fp = 8 Khz)

    Motor rotor leakage inductance/damping p358 0.499 0.499 inductance d axis Motor magnetizing inductance/magnetizing p360 6.642 6.642 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 50 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 67.8 67.8 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 51 Motor rotor leakage inductance/damping p358 0.499 0.499 inductance d axis Motor magnetizing inductance/magnetizing p360 6.642 6.642 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 52 Modulator configuration p1810 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 53: Water Cooling

    Motor rotor leakage inductance/damping p358 0.826 0.826 inductance d axis Motor magnetizing inductance/magnetizing p360 8.624 8.624 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 54 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 26.5 26.5 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 55: 1Ph8081-1_T2 (Fp = 4 Khz)

    Motor rotor leakage inductance/damping p358 0.68 0.68 inductance d axis Motor magnetizing inductance/magnetizing p360 6.46406 6.46406 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 56 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 31.8 31.8 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 57: 1Ph8081-1_V2 (Fp = 8 Khz)

    Motor rotor leakage inductance/damping p358 0.680 0.680 inductance d axis Motor magnetizing inductance/magnetizing p360 6.464 6.464 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 58 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 21.5 21.5 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 59: 1Ph8081-1_W2 (Fp = 8 Khz)

    Motor rotor leakage inductance/damping p358 0.826 0.826 inductance d axis Motor magnetizing inductance/magnetizing p360 8.624 8.624 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 60 Modulator configuration p1810 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 61: 1Ph8083-1_T2 (Fp = 4 Khz)

    Motor rotor leakage inductance/damping p358 0.442 0.442 inductance d axis Motor magnetizing inductance/magnetizing p360 6.580 6.580 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 62 Modulator configuration p1810 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 63 Motor rotor leakage inductance/damping p358 0.442 0.442 inductance d axis Motor magnetizing inductance/magnetizing p360 6.580 6.580 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 64 Modulator configuration p1810 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 65: 1Ph8083-1_U2 (Fp = 4 Khz)

    Motor rotor leakage inductance/damping p358 0.914 0.914 inductance d axis Motor magnetizing inductance/magnetizing p360 14.444 14.444 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 66 Modulator configuration p1810 "&H800" "&H800" Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 67: 1Ph8087-1_U2 (Fp = 4 Khz)

    Motor rotor leakage inductance/damping p358 1.001 1.001 inductance d axis Motor magnetizing inductance/magnetizing p360 15.248 15.248 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 68 Modulator configuration p1810 &H800 &H800 Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 69 Motor rotor leakage inductance/damping p358 1.001 1.001 inductance d axis Motor magnetizing inductance/magnetizing p360 15.248 15.248 inductance d axis, saturated Mot_temp_mod 2/KTY warning threshold p604 Mot_temp_mod 1/2 threshold p605 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 70 Modulator configuration p1810 &H800 &H800 Current controller P gain p1715 Reference speed reference frequency p2000 24,000 24,000 Reference current p2002 Reference torque p2003 Hysteresis speed n_act > n_max p2162 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 71: Characteristics

    Characteristics Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 72: Forced Ventilation

    Characteristics 5.1 Forced ventilation Forced ventilation 5.1.1 1PH8081-1_U0_1 (fp = 4 kHz) Image 6-1 1PH8081-1_U1Uzk_540V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 73 Characteristics 5.1 Forced ventilation Image 6-2 1PH8081-1_U1_Uzk-600V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 74 Characteristics 5.1 Forced ventilation Image 6-3 1PH8081_1_1U1Uzk_650V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 75 Characteristics 5.1 Forced ventilation Image 6-4 1PH8081_1_U1Uzk_720V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 76: 1Ph8081-1_V0_1 (Fp = 8 Khz)

    Characteristics 5.1 Forced ventilation 5.1.2 1PH8081-1_V0_1 (fp = 8 kHz) Image 6-5 1PH8081-1_V1_Uzk_540V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 77 Characteristics 5.1 Forced ventilation Image 6-6 1PH8081-1_V1_Uzk_600V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 78 Characteristics 5.1 Forced ventilation Image 6-7 1PH8081-1_V1_Uzk_650V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 79 Characteristics 5.1 Forced ventilation Image 6-8 1PH8081-1_V1_Uzk_720V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 80: 1Ph8081-1_W0_1 (Fp = 8 Khz)

    Characteristics 5.1 Forced ventilation 5.1.3 1PH8081-1_W0_1 (fp = 8 kHz) Image 6-9 1PH8081-1_W1_Uzk_540V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 81 Characteristics 5.1 Forced ventilation Image 6-10 1PH8081-1_W1_Uzk-600V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 82 Characteristics 5.1 Forced ventilation Image 6-11 1PH8081-1_W1_Uzk_650V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 83 Characteristics 5.1 Forced ventilation Image 6-12 1PH8081-1_W1_Uzk_720V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 84: 1Ph8083-1_V0_1 (Fp = 8 Khz)

    Characteristics 5.1 Forced ventilation 5.1.4 1PH8083-1_V0_1 (fp = 8 kHz) Image 6-13 1PH8083-1_V1_Uzk_540V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 85 Characteristics 5.1 Forced ventilation Image 6-14 1PH8083-1_V1_Uzk_600V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 86 Characteristics 5.1 Forced ventilation Image 6-15 1PH8083-1_V1_Uzk_650V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 87 Characteristics 5.1 Forced ventilation Image 6-16 1PH8083-1_V1_Uzk_720V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 88: 1Ph8083-1_W0_1 (Fp = 8 Khz)

    Characteristics 5.1 Forced ventilation 5.1.5 1PH8083-1_W0_1 (fp = 8 kHz) Image 6-17 1PH8083-1_W1_Uzk_540V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 89 Characteristics 5.1 Forced ventilation Image 6-18 1PH8083-1_W1_Uzk_600V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 90 Characteristics 5.1 Forced ventilation Image 6-19 1PH8083-1_W1_Uzk_650V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 91 Characteristics 5.1 Forced ventilation Image 6-20 1PH8083-1_W1_Uzk_720V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 92: 1Ph8087-1_V0_1 (Fp = 8 Khz)

    Characteristics 5.1 Forced ventilation 5.1.6 1PH8087-1_V0_1 (fp = 8 kHz) Image 6-21 1PH8087-1_V1_Uzk_540V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 93 Characteristics 5.1 Forced ventilation Image 6-22 1PH8087-1_V1_Uzk_600V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 94 Characteristics 5.1 Forced ventilation Image 6-23 1PH8087-1_V1_Uzk_650V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 95 Characteristics 5.1 Forced ventilation Image 6-24 1PH8087-1_V1_Uzk_720V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 96: Water Cooling

    Characteristics 5.2 Water cooling Water cooling 5.2.1 1PH8081-1_U2 (fp = 4 kHz) Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 97 Characteristics 5.2 Water cooling Image 6-25 1PH8081_1_U2Uzk_540V Image 6-26 1PH8081-1_U2_Uzk_600V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 98 Characteristics 5.2 Water cooling Image 6-27 1PH8081-1_U2_Uzk_650V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 99 Characteristics 5.2 Water cooling Image 6-28 1PH8081-1_U2_Uzk_720V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 100: 1Ph8081-1_T2 (Fp = 4 Khz)

    Characteristics 5.2 Water cooling 5.2.2 1PH8081-1_T2 (fp = 4 kHz) Image 6-29 1PH8081-1_T2_Uzk-540V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 101 Characteristics 5.2 Water cooling Image 6-30 1PH8081-1_T2_Uzk-600V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 102 Characteristics 5.2 Water cooling Image 6-31 1PH8081-1_T2_Uzk-650V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 103 Characteristics 5.2 Water cooling Image 6-32 1PH8081_T_T2_Uzk_720V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 104: 1Ph8081-1_V2 (Fp = 8 Khz)

    Characteristics 5.2 Water cooling 5.2.3 1PH8081-1_V2 (fp = 8 kHz) Image 6-33 1PH8081-1_V2_Uzk_540V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 105 Characteristics 5.2 Water cooling Image 6-34 1PH8081-1_V2_Uzk_600V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 106 Characteristics 5.2 Water cooling Image 6-35 1PH8081-1_V2_Uzk_650V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 107 Characteristics 5.2 Water cooling Image 6-36 1PH8081-1_V2_Uzk_720V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 108: 1Ph8081-1_W2 (Fp = 8 Khz)

    Characteristics 5.2 Water cooling 5.2.4 1PH8081-1_W2 (fp = 8 kHz) Image 6-37 1PH8081-1_W2_Uzk-540V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 109 Characteristics 5.2 Water cooling Image 6-38 1PH8081-1_W2_Uzk_600V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 110 Characteristics 5.2 Water cooling Image 6-39 1PH8081-1_W2_Uzk_650V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 111 Characteristics 5.2 Water cooling Image 6-40 1PH8081-1_W2_Uzk_720V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 112: 1Ph8083-1_T2 (Fp = 4 Khz)

    Characteristics 5.2 Water cooling 5.2.5 1PH8083-1_T2 (fp = 4 kHz) Image 6-41 1PH8083-1_T2_Uzk_540V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 113 Characteristics 5.2 Water cooling Image 6-42 1PH8083-1_T2_Uzk_600V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 114 Characteristics 5.2 Water cooling Image 6-43 1PH8083-1_T2_Uzk_650V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 115 Characteristics 5.2 Water cooling Image 6-44 1PH8083-1_T2_Uzk_720V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 116: 1Ph8083-1_U2 (Fp = 4 Khz)

    Characteristics 5.2 Water cooling 5.2.6 1PH8083-1_U2 (fp = 4 kHz) Image 6-45 1PH8083-1_U2_Uzk_540V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 117 Characteristics 5.2 Water cooling Image 6-46 1PH8083-1_U2_Uzk_600V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 118 Characteristics 5.2 Water cooling Image 6-47 1PH8083-1_U2_Uzk650V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 119 Characteristics 5.2 Water cooling Image 6-48 1PH8083-1_U2_Uzk_720V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 120: 1Ph8087-1_U2 (Fp = 4 Khz)

    Characteristics 5.2 Water cooling 5.2.7 1PH8087-1_U2 (fp = 4 kHz) Image 6-49 1PH8087-1_U2_Uzk_540V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 121 Characteristics 5.2 Water cooling Image 6-50 1PH8087-1_U2_Uzk_600V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 122 Characteristics 5.2 Water cooling Image 6-51 1PH8087-1_U2_Uzk_650V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 123 Characteristics 5.2 Water cooling Image 6-52 1PH8087-1_U2_Uzk_720V Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...
  • Page 124 Characteristics 5.2 Water cooling Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

  • Page 125: Index

    Index Hotline, 6 Siemens Service Center, 6 Technical Support, 6 Training, 6 Commissioning instructions for SIMOTICS M-1PH8 Premium Performance Commissioning Manual, 10/2014, 610.40106.40...

Table of Contents