Advertisement
MS4104, MS4109, MS4604, MS4609, MS8104,
MS8109 Fast-Acting, Two-Position Actuators
FOR FIRE/SMOKE CONTROL APPLICATIONS
APPLICATION
The MS4104, MS4109, MS4604, MS4609, MS8104 and
MS8109 Fast-Acting, Two-Position Actuators are spring return
direct coupled actuators (DCA) for Fire and Smoke dampers
(on/off control). The actuator accepts an on/off signal from a
single-pole, single-throw (SPST) controller. Reversible
mounting allows actuator to be used for either clockwise (cw)
or counterclockwise (ccw) spring rotation.
FEATURES
• 30 lb-in. (3.4 N•m) or 80 lb-in. (5.9 N•m) minimum
driving torque at 350°F (176°C).
• Reversible mounting facilitates use in either clockwise
(cw) or counterclockwise (ccw) spring rotation.
• Integral spring return ensures level of return torque.
• Fifteen-second spring return timing.
• No special cycling required during long-term holding.
(See Operation section.)
• No audible noise during holding.
• Patent pending design eliminates need for limit
switches to reduce power consumption.
• Models available for 24, 120, and 230 Vac.
• Ninety-five degree angle of rotation.
• Actuator holds rated torque at reduced power level.
• Die-cast aluminum housing.
• Housing design allows flush mounting to damper.
• Designed to operate reliably in smoke control systems
requiring Underwriter's Laboratories Inc. UL555S
ratings up to 350°F.
• Models available with SPST position-indicating
switches (7°, 85° stroke).
Application ........................................................................
Features ...........................................................................
Specifications ...................................................................
Ordering Information ........................................................
Installation ........................................................................
Operation ..........................................................................
Checkout ..........................................................................
PRODUCT DATA
Contents
1
1
2
2
4
6
6
63-2740-02
Advertisement
Table of Contents
Related Manuals for Honeywell MS4104F1010
Summary of Contents for Honeywell MS4104F1010
-
Page 1: Table Of Contents
MS4104, MS4109, MS4604, MS4609, MS8104, MS8109 Fast-Acting, Two-Position Actuators FOR FIRE/SMOKE CONTROL APPLICATIONS PRODUCT DATA FEATURES • 30 lb-in. (3.4 N•m) or 80 lb-in. (5.9 N•m) minimum driving torque at 350°F (176°C). • Reversible mounting facilitates use in either clockwise (cw) or counterclockwise (ccw) spring rotation. -
Page 2: Specifications
TRADELINE® Catalog or price sheets for complete ordering number. If you have additional questions, need further information, or would like to comment on our products or services, please write or phone: 1. Your local Honeywell Environmental and Combustion Controls Sales Office (check white pages of your phone directory). 2. Honeywell Customer Care... - Page 3 2 (51) cial cycling during long-term holding. 1 (25) Honeywell recommends following all local, state and national codes for periodic testing of the entire smoke control sys- 11/16 (17) tem.
-
Page 4: Installation
MS4104, MS4109, MS4604, MS4609, MS8104, MS8109 FAST-ACTING, TWO-POSITION ACTUATORS INSTALLATION When Installing this Product... 1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition. 2. Check the ratings given in the instructions and on the product to make sure the product is suitable for your application. - Page 5 MS4104, MS4109, MS4604, MS4609, MS8104, MS8109 FAST-ACTING, TWO-POSITION ACTUATORS Installation IMPORTANT 1. All wiring must comply with local electrical codes, ordinances and regulations. 2. Voltage and frequency of transformer must corre- CAUTION spond with the characteristics of power supply and Device Malfunction Hazard.
-
Page 6: Operation
The actuator and the internal spring are designed so that no drive the damper to the open position. The actuator special cycling during long-term holding is required. Honeywell should drive the damper. recommends following all local, state, and national codes for 3. - Page 7 63-2740—02...
- Page 8 Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive North ® U.S. Registered Trademark Golden Valley, MN 55422 © 2013 Honeywell International Inc. 63-2740—02 M.S. 05-13 customer.honeywell.com Printed in Mexico...