Sony WEGA KV 32HV600 Operating Instructions Manual
Sony fd trinitron wega operating instruction kv-32hv600
Hide thumbs
Also See for WEGA KV 32HV600:
- Operating instructions manual (89 pages) ,
- Brochure (2 pages) ,
- Service manual (420 pages)
Related Manuals for Sony WEGA KV 32HV600
Summary of Contents for Sony WEGA KV 32HV600
-
Page 1: Operating Instructions
4-087-509-21 ® Operating Instructions * Important: Read this manual before using this product © 2002 Sony Corporation KV-32HV600 Sony Corporation Printed in U.S.A. - Page 2 Owner’s Record The model and serial numbers are provided on the front of this instruction manual and at the rear of the TV. Refer to them whenever you call upon your Sony dealer regarding this product. Trademark Information TruSurround and the symbol are trademarks of SRS Labs, Inc.
-
Page 3: Important Safeguards
IMPORTANT SAFEGUARDS For your protection, please read these instructions completely, and keep this manual for future reference. Carefully observe and comply with all warnings, cautions and instructions placed on the set, or described in the operating instructions or service manual. WARNING To guard against injury, the following basic safety precautions should be observed in the installation, use, and servicing of the set. - Page 4 Ventilation The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered. ❑...
-
Page 6: Table Of Contents
Contents Introducing the FD Trinitron Wega Overview ...7 Presenting the FD Trinitron Wega ... 7 Setting Up the TV Overview ...9 TV Controls and Connectors...10 Basic Connections: Connecting a Cable or Antenna...14 Connecting Optional Equipment ...21 Using the CONTROL S Feature ...37 Setting Up the Channel List ...38 Using the Remote Control Overview ...39... -
Page 7: Using The Features
Using the Channel Menu ...68 Using the Parent Menu...70 Using the Timer Menu ...73 Using the Setup Menu ...74 Overview ...77 Glossary ...78 Notes on Using Memory Stick Media ...79 Contacting Sony ...80 Troubleshooting...80 Specifications ...84 Optional Accessories...84 Index ...85... -
Page 8: Overview
Introducing the FD Trinitron Wega Overview This chapter describes the contents of the package in which the TV is shipped and provides an overview of the features of your Wega TV. Presenting the FD Trinitron Wega The FD Trinitron Wega (pronounced VAY-GAH) is characterized by outstanding contrast, uncompromising accuracy, and corner-to- corner detail. - Page 9 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 16:9 is also referred to as widescreen format. ❑ ❑ *High-bandwidth Digital Content Protection ™ Twin View : Using the Multi-Image Driver (MIDX), Twin View allows you to watch two programs side by side, with the ability to zoom in one picture.
-
Page 10: Overview
Setting Up the TV Overview This chapter includes illustrated instructions for setting up your TV. Topic TV Controls and Connectors Basic Connections: Connecting a Cable or Antenna Connecting Optional Equipment Using the CONTROL S Feature Setting Up the Channel List About the AC The AC power cord is attached to the rear of the TV with a hook. -
Page 11: Tv Controls And Connectors
TV Controls and Connectors Front Panel VIDEO 2 INPUT VIDEO S VIDEO MENU SELECT TV/VIDEO L(MONO) – AUDIO – R qa qs qd TIMER STAND BY VOLUME CHANNEL POWER... - Page 12 Blinks when the TV is turned on, then shuts off when the picture is displayed. If the LED blinks continuously, this may indicate the TV needs service (see “Contacting Sony” on page 80). Infrared Receiver (IR) Receives IR signals from the TV’s remote control.
-
Page 13: Rear Panel
Rear Panel... - Page 14 Primary RF input that connects to your VHF/UHF antenna or cable. 0 CONTROL S Allows the TV to receive (IN) and send (OUT) remote control signals to other Sony IN/OUT infrared-controlled audio or video equipment that has the CONTROL S function.
-
Page 15: Basic Connections: Connecting A Cable Or Antenna
Basic Connections: Connecting a Cable or Antenna The way in which you will connect your TV varies, depending on how your home receives a signal (cable, cable box, antenna) and whether or not you plan to connect a VCR. If You Are Connecting Cable or Antenna Only ❏... -
Page 16: Cable Or Antenna Only
Cable or Antenna For best results, use one of the following connections if you are connecting a cable or an antenna and you: Only ❑ ❑ The connection you choose depends on the cable type you have in your home, as described below. 75-ohm coaxial cable (usually found in newer homes) Cable Type VHF Only or... -
Page 17: Cable And Antenna Only
Cable and Antenna For best results, use this connection if you: ❑ Only ❑ Cable Type Cable TV (CATV) and Antenna About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you cannot view CATV channels in the right dual picture window. Have a cable and an antenna. - Page 18 Notes on Using This Connection To Do This ... Do This ... Switch the TV’s input Press between the cable and inputs. antenna Receive channels using an antenna, instead of the cable to switch back and forth between the TV’s VHF/UHF and AUX Press to switch to the AUX input.
-
Page 19: Cable Box And Cable Only
Cable Box and For best results, use this connection if: ❑ Cable Only ❑ With this connection you can: ❑ ❑ About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you can use all the dual picture features for unscrambled channels coming directly into the TV’s VHF/UHF input jack. - Page 20 To connect the cable box and cable Notes on Using This Connection To Do This ... Do This ... Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4) and then use the cable box to switch channels.
-
Page 21: Cable Box Only
Cable Box Only For best results, use this connection if: ❑ ❑ With this connection you can: ❑ About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, all channels come into the TV through your cable box and only one unscrambled signal is sent to the TV, so you cannot use the dual picture features.. -
Page 22: Connecting Optional Equipment
Connecting Optional Equipment Use the directions in this section to connect the following optional equipment: If You Are Connecting VCR and Cable VCR and Cable Box Two VCRs for Tape Editing Satellite Receiver Satellite Receiver and VCR DVD Player with Component Video Connectors DVD Player with S VIDEO and Audio Connectors... -
Page 23: Vcr And Cable
VCR and Cable For best results, use this connection if: ❑ About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you can use all the dual picture features. To connect the VCR and cable Using S VIDEO jacks? See page 21. - Page 24 Watch cable channels Press illustration). Set up the TV remote control If you have a non-Sony VCR, you must program the remote control. See to operate the VCR “Programming the Remote Control” on pages 43-44. Activate the TV remote Open the outside cover, as shown on page 42. Then set the A/V slide switch control to operate the VCR to the position you programmed for the VCR.
-
Page 25: Vcr And Cable Box
VCR and Cable Box For best results, use this connection if: ❑ About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you can use all the dual picture features. With this connection you can: ❑ ❑... - Page 26 Watch the VCR Press illustration). Set up the TV remote control If you have a non-Sony VCR, you must program the remote control. See to operate the cable box or “Programming the Remote Control” on pages 43-44. Activate the remote control to...
-
Page 27: Two Vcrs For Tape Editing
Two VCRs for Tape Connecting two VCRs lets you record from one VCR to the other. By connecting them as shown below, you can view (monitor) what is Editing being recorded. Using To connect two VCRs for tape editing S VIDEO jacks? See page 21. - Page 28 Press recorded illustration above). Set up the TV remote control If you have a non-Sony VCR, you must program the remote control. See to operate the VCR(s) “Programming the Remote Control” on pages 43-44. Activate the TV remote Open the outside cover, as shown on page 42. Then set the A/V slide switch control to operate the VCR(s) to the position you programmed for the VCR.
-
Page 29: Satellite Receiver
Satellite Receiver To connect a satellite receiver Using S VIDEO jacks? See page 21. Connect the satellite antenna cable to the satellite receiver’s satellite input jack. Use an A/V cable to connect the satellite receiver’s A/V output jacks to the TV’s A/V input jacks. Connect a CATV cable from your cable or antenna to the TV’s VHF/UHF jack. - Page 30 Do This ... Press TV/VIDEO repeatedly to select the satellite receiver input (VIDEO 1 in the illustration). If you have a non-Sony satellite receiver, you must program the remote control. See “Programming the Remote Control” on pages 43-44. Press SAT/CABLE FUNCTION.
-
Page 31: Satellite Receiver And Vcr
Satellite Receiver To connect a satellite receiver and VCR and VCR Using S VIDEO jacks? See page 21. A/V cable Connect the satellite antenna cable to the satellite receiver’s satellite input jack. Connect the CATV cable to the VCR’s VHF/UHF input jack. Use a coaxial cable to connect the VCR’s VHF/UHF output jack to the TV’s VHF/UHF jack. - Page 32 Press (VIDEO 1 in the illustration). Set up the TV remote control If you have a non-Sony VCR or satellite receiver, you must program the to operate the satellite remote control. See “Programming the Remote Control” on pages 43-44. receiver or VCR...
-
Page 33: Dvd Player With Component Video Connectors
DVD Player with Component Video Connectors DVD player Cables are often color-coded to connectors. Connect red to red, white to white, etc. For best results, use this connection if your DVD player has component video (Y, P ) jacks. To connect a DVD player with component video connectors Use three separate component video cables to connect the DVD player’s Y, P and P... - Page 34 Watch the DVD player Press illustration). Set up the TV remote control If you have a non-Sony DVD player, you must program the remote control. to operate the DVD player See “Programming the Remote Control” on pages 43-44. Activate the TV remote Open the outside cover, as shown on page 42.
-
Page 35: Dvd Player With S Video And Audio Connectors
Watch the DVD player Press illustration). Set up the TV remote control If you have a non-Sony DVD player, you must program the remote control. to operate the DVD player See “Programming the Remote Control” on pages 43-44. Activate the TV remote Open the outside cover, as shown on page 42. -
Page 36: Camcorder
Camcorder For easy connection of a camcorder, the TV has front A/V input jacks. If you prefer, however, you can connect the camcorder to the TV’s rear A/V input jacks. Using S VIDEO jacks? To connect a camcorder See page 21. VIDEO 2 INPUT VIDEO S VIDEO... -
Page 37: Audio Receiver
Audio Receiver For improved sound quality, you may want to play the TV’s audio through your stereo system. To connect an audio system Receiver Use an audio cable to connect the TV’s audio output jacks to the audio receiver’s line input jacks. Audio cable To line input Using the TV’s Audio Menu, set the... -
Page 38: Using The Control S Feature
Using the CONTROL S Feature CONTROL S allows you to control your system and other Sony equipment with one remote control. In addition to allowing you to control multiple devices with one remote control, the CONTROL S feature allows you to always point your remote control at your TV, instead of having to point it at the other equipment, which might be hidden or out of direct line of sight. -
Page 39: Setting Up The Channel List
Setting Up the Channel List After you finish connecting your TV, you need to run Auto Setup to set up your channels. The Auto Setup screen appears when you turn on your TV for the first time after hooking it up. If you do not want to set up the channels at this time, you can do it later by selecting the Auto Program option in the Channel Menu (see page 68). -
Page 40: Overview
Using the Remote Control Overview This chapter describes how to set up, program, and use the TV’s remote control. Topic Inserting Batteries Button Descriptions Programming the Remote Control Inserting Batteries ✍ Outside Panel Inside Panel Remove the battery cover from the remote control. Insert two size AA (R6) batteries (supplied) by matching the e and E terminals on the batteries to the diagram inside the battery compartment. -
Page 41: Button Descriptions
Button Descriptions Outside Panel MUTING SAT/CABLE POWER FUNCTION SAT/CABLE TV/VIDEO PIC MODE JUMP ENTER INDEX MENU MODE PALETTE RESET DISPLAY FREEZE GUIDE CODE SET RM-Y187 Button Description 1 MUTING Press to mute the sound. Press again or press restore the sound. 2 SLEEP Press repeatedly until the TV displays the time in minutes (15, 30, 45, 60, or 90) that you want the TV to... - Page 42 Button Description qg CODE SET Press to program the remote control to operate non- Sony video equipment. For details, see “Programming the Remote Control” on page 43. qh POWER SAT/CABLE: Press to turn on and off the satellite receiver Buttons or cable box.
-
Page 43: Inside Panel
VCR or DVD player, depending on the position of the A/V slide switch. For details, see page 43. Button Description wg SYSTEM OFF Press to turn off all Sony brand audio/video equipment at once. (May not function with older Sony equipment.) wh Transport Rewind Buttons... -
Page 44: Programming The Remote Control
Beta, Ed Beta VCRs 8 mm VCR VHS VCR DVD player If you have video equipment other than Sony brand that you want to control with the TV’s remote control, use the following procedure to program the remote control. ✍... - Page 45 Manufacturer’s Codes VCRs Manufacturer Code Sony 301, 302, 303 Admiral (M. Ward) Aiwa 338, 344 Audio 314, 337 Dynamic Broksonic 319, 317 Canon 309, 308 Citizen Craig 302, 332 Criterion Curtis Mathes 304, 338, 309 Daewoo 341, 312, 309 314, 336, 337...
-
Page 46: Overview
Using the Features Overview This chapter describes how to use the features of your TV. Topic Watching TV Using the Scrolling Index Using Twin View Using Favorite Channels Using the Freeze Function Using the Memory Stick Picture Viewer Using Other Equipment with Your TV Remote Control Page... -
Page 47: Watching Tv
Watching TV To Do This ... For a complete list of all Activate the remote control to the functions of the remote operate the TV control, see pages 39-44. Turn on/off the TV Tune directly to a channel Adjust the volume Mute the volume Alternate back and forth between two channels... -
Page 48: Using The Scrolling Index
Using the Scrolling Index The Scrolling Index lets you select programs from a scrolling index of video pictures. To exit the Scrolling Index ❑ Factors Affecting Scrolling Index ❑ Scrolling Index feature does not function if you use a cable box to view all channels. ❑... -
Page 49: Using Twin View
Using Twin View Twin View lets you see two pictures from two sources — from an antenna, VCR, DVD, etc. — on the screen at the same time. You hear the sound from only one of the sources at a time, but you can choose which source’s sound is selected. -
Page 50: Activating The Picture
Activating the To activate the picture in the right Picture window ❑ Functions Available in the Active (Highlighted) Window To Do This ... Tune to a channel Adjust the volume Mute the volume Switch the TV’s input between sources connected to the TV’s VHF/UHF and AUX inputs Switch the TV’s input between sources connected to the TV’s... -
Page 51: Changing The Picture Size
Changing the The zoom feature lets you vary the relative size of the left and right pictures. Picture Size When you adjust the picture sizes, the TV memorizes the change. The next time you use the Twin View function, the memorized sizes appear. -
Page 52: Using Favorite Channels
Using Favorite Channels The Favorite Channels feature lets you select programs from a list of up to eight favorite channels that you specify. Creating a List of Favorite Channels For details on using the Channel Menu, see page 68. Displaying a List of Favorite Channels To assign Channel Labels... -
Page 53: Using The Freeze Function
Using the Freeze Function picture. You can use this feature to write down information such as phone numbers, recipes, etc. ✍ button allows you to temporarily capture a program’s FREEZE The Freeze feature is not available while using Twin View. When the program information you want to capture is displayed, press FREEZE... -
Page 54: Using The Memory Stick Picture Viewer
“Notes on Using Memory Stick Media” on page 79. Supported Image This TV’s Memory Stick viewer can display only still images that Types have been recorded on Memory Stick media by Sony brand digital still and video cameras. ✍ Recorded images must also meet the following specifications: ❑... -
Page 55: Unsupported Image Types
About DCF File Names Most Sony brand digital still and video cameras automatically record still images using DCF compliant directory and file names, as shown in the following example: ✍ Unsupported This TV’s Memory Stick viewer cannot display any of the following: Image Types ❑... -
Page 56: Inserting And Removing A Memory Stick
Inserting and To insert a Memory Stick Removing a Memory Stick ✍ To remove a Memory Stick ✍ Locate the Memory Stick slot (see page 10) and insert the Memory Stick into the Memory Stick slot as illustrated below. When inserted properly, it should slide in with little resistance and click into place. -
Page 57: Displaying The Memory Stick Menu
Displaying the Memory Stick Menu ✍ Insert a Memory Stick that contains the images you want to view. For details, see page 55. Press the button on the remote control. The Memory MEMORY STICK Stick Menu appears. Memory Stick Index Slideshow Setup Move:... -
Page 58: Using The Memory Stick Index
Using the Memory The Memory Stick Index lets you view images that are on the Memory Stick in an index of thumbnail images. Stick Index ✍ The Page and folder ( buttons are available only if the Memory Stick contains more images or folders than can be displayed on one screen. -
Page 59: Using The Memory Stick Slideshow
Using the Memory The Memory Stick Slideshow lets you watch a slideshow of the images that are on the Memory Stick. Stick Slideshow Changing the Memory Stick Setup Options Insert a Memory Stick that contains the images you want to view. For details, see page 55. -
Page 60: Using The Rotate Picture Screen
Using the Rotate The Rotate Picture Screen lets you rotate an image from an index of thumbnails. Picture Screen ✍ The Page and folder ( buttons are available only if the Memory Stick contains more images or folders than can be displayed on one screen. -
Page 61: Using Other Equipment With Your Tv Remote Control
To Do This ... Switch the TV’s input to the VCR, DVD player, or other connected equipment Set up the TV remote control to operate non-Sony equipment Operating a VCR To Do This ... Activate the remote control to operate the VCR... -
Page 62: Operating A Cable Box
Operating a Cable To Do This ... Activate the remote control to operate the cable box Turn on/off Select a channel Change channels Back to previous channel Operating a DVD To Do This ... Player Activate the remote control to operate the DVD Play Stop Pause... -
Page 64: Using The Menus
Using the Menus Overview The Menu gives you access to the following features: Menu Icon Press MENU to enter and exit Menus. Navigating Through Menus To Do This ... Display the Menu Move through the Menus Move through the Menu options Menus include navigation Select an option to change help text that appears at the... -
Page 65: Using The Video Menu
Using the Video Menu To select the Video Menu To restore the factory default settings for Video settings (except for Advanced Video settings): ❑ Selecting Video The Video Menu includes the following options: Options Option Mode To change from one Mode Customized to another, use the PIC MODE... - Page 66 Option ClearEdge VM Velocity Modulation Advanced To change quickly from one Video DRC Mode to another, use the DRC MODE button on the remote control. To change quickly from one DRC Palette to another, use the DRC PALETTE button on the remote control.
-
Page 67: Using The Audio Menu
Using the Audio Menu To select the Audio Menu To restore the factory default settings for Treble, Bass, and Balance ❑ Selecting Audio The Audio Menu includes the following options: Options Option Treble Bass Balance Steady Sound To change quickly from one Effect Effect to another, use the button on the inside panel of the... - Page 68 Option Description Speaker Select to turn on the TV speakers. Select to turn off the TV speakers and listen to the TV's sound only through your external audio system speakers. Audio Out This option can be set only when the to Off.
-
Page 69: Using The Channel Menu
Using the Channel Menu To select the Channel Menu Selecting Channel The Channel Menu includes the following options: Options Option Favorite Channels Cable Channel Fix Useful when you have a cable box or satellite receiver connected Auto Program Press MENU Move the joystick highlight the Channel icon and press... - Page 70 Option Channel Channels that you set to Skip/Add be skipped can be accessed only with the buttons. Channel Label Description Allows you to customize the channel list that appears CH+/- when you use the buttons. Move the joystick to scroll through the channels until you find the channel you want to skip or add.
-
Page 71: Using The Parent Menu
Using the Parent Menu The Parent Menu allows you to set up the TV to block programs according to their content and rating levels. To select the Parent Menu Using the Parent The Parent Menu includes the following options: Menu Option Parental Lock If you are not familiar with... -
Page 72: Viewing Blocked Programs
US Models: For US models, the Custom Rating Menu includes the following options. (For Canadian models, see page 72.) Selecting Custom Rating Options Option Movie Rating The Content-Based Ratings are linked to the level of the Age-Based Rating. For example, a program with an Age-Based Rating of TV-PG V (Violence) rating may contain moderate... - Page 73 Canadian Models: For Canadian models, the Custom Rating Menu includes the following options. (For US models, see page 71 Selecting Custom Rating Options Option English Rating French Rating U.S.A. Rating Viewing Blocked You can view blocked programs by entering the password. Press the Programs ENTER password.
-
Page 74: Using The Timer Menu
Using the Timer Menu To select the Timer Menu To reset the Clock or Timers ❑ Selecting Timer Options Option Timer 1 Timer 2 To go directly to programming Timer 1 or 2 , press instead of moving the joystick b. To return to the Timer Menu after programming one of the Timers, press... -
Page 75: Using The Setup Menu
Using the Setup Menu To select the Setup Menu Selecting The Setup Menu includes the following options: Setup Options Option Caption Vision Press MENU Move the joystick highlight the Setup icon and press Move the joystick to highlight an option. Press to select an option. - Page 76 Option Video Label Skip label is useful for inputs that do not have equipment connected to them. Tilt Correction Language 16:9 Enhanced To use 16:9 Enhanced with widescreen DVDs, set your DVD player to 16:9 aspect ratio. (Aspect ratio is the ratio of width to height of the screen.
-
Page 78: Overview
Other Information Overview This chapter includes the following topics: Topic Glossary Notes on Using Memory Stick Media Contacting Sony Troubleshooting Specifications Optional Accessories Index Page... -
Page 79: Glossary
Glossary analog signal A signaling method that uses continuous changes in the amplitude or frequency of an electronic transmission to convey information. aspect ratio Refers to the ratio between the width and height of the screen. This TV has a 4:3 aspect ratio, as opposed to a 16:9 (widescreen) aspect ratio. -
Page 80: Notes On Using Memory Stick Media
Notes on Using Memory Stick Media Memory Stick When using Memory Stick media, follow these precautions: Precautions ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ To avoid permanent damage to still image data, do not turn off the TV or remove Memory Stick media from the insertion slot while data is being read (as indicated by the Memory Stick indicator light being on). -
Page 81: Contacting Sony
Contacting Sony If, after reading these operating instructions, you have additional questions related to the use of your Sony television, please call our Customer Information Services Center at 1-800-222-SONY (7669) (US residents only) or (416) 499-SONY (7669) (Canadian residents only). -
Page 82: Remote Control
There may be more than one code for the equipment that you are attempting to operate. There is a possibility that some non-Sony equipment cannot be operated by your Sony TV remote.You may need to use the equipment’s original remote control. - Page 83 Cannot raise the volume on external audio speakers ❏ If your TV does not turn on, and a red light keeps flashing, your TV may need service. Call your local Sony Service Center. Make sure the power cord is plugged in. Press the POWER button on the front of the TV.
- Page 84 Channels Problem Possible Remedies ❏ Cannot receive upper ❏ channels (UHF) when using an antenna ❏ TV is fixed to one channel ❏ ❏ Cannot receive any channels when using ❏ cable TV ❏ Cannot receive or select channels General Problem Possible Remedies ❏...
-
Page 85: Specifications
Specifications Picture Tube Antenna Television System Channel Coverage Power Requirements Inputs/Outputs DVI-HDTV Video (IN) S Video (IN) Audio (IN) Component Video Input CONTROL S (IN/OUT) Variable/Fixed Audio (OUT) Supplied Accessories Visible Screen Size Actual CRT Size Speaker Output Dimensions (W x H x D) Mass Power Consumption Optional Accessories... -
Page 86: Index
Index 0-9 buttons 16:9 (widescreen) Advanced Video ANT button antenna, connecting aspect ratio Audio Menu Audio Out audio receiver, connecting Auto Program (channel setup) Auto SAP, MTS setting AUX jack, described AV1-3/DVD slide switch balance, adjusting bass, adjusting batteries, inserting in remote bilingual audio blocking programs. - Page 87 FREEZE button Freeze, using GUIDE button HD Detailer HD/DVD IN (1080i/720p/480p/480i) jacks, described hue, adjusting INDEX button interlaced joystick JUMP button label channels 69 Language, setting LOCK switch, Memory Stick MDP, using with TV remote control Memory Stick Index 57 indicator (LED) 11 inserting 55 insertion slot 11...
- Page 88 S VIDEO jack, described SAT/CABLE FUNCTION button SAT/CABLE POWER button satellite receiver, using with TV remote control Scrolling Index, using SELECT button setting up channels Setup Menu sharpness, adjusting Simulated, Effect sizing, picture in Twin View SLEEP button slideshow speakers turning on/off 67 using external speakers 67 specifications...