hit counter script
Siemens Simatic IPC547E Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Industrial PC
  5. SIMATIC IPC547E
  6. Operating instructions manual

Siemens Simatic IPC547E Operating Instructions Manual

Hide thumbs Also See for Simatic IPC547E:
Table of Contents

Advertisement

Quick Links

SIMATIC IPC547E
SIMATIC
Industrial PC
SIMATIC IPC547E
Operating Instructions
02/2014
A5E32317120-AB
___________________
Preface
___________________
Overview
___________________
Safety instructions
___________________
Installing and connecting the
device
___________________
Commissioning the device
___________________
Expanded device functions
Expanding and assigning
___________________
parameters to the device
___________________
Device maintenance and
repair
___________________
Technical specifications
___________________
Technical support
___________________
List of abbreviations
1
2
3
4
5
6
7
8
A
B

Advertisement

Table of Contents
loading

Related Manuals for Siemens Simatic IPC547E

Summary of Contents for Siemens Simatic IPC547E

  • Page 1 ___________________ SIMATIC IPC547E Preface ___________________ Overview ___________________ Safety instructions SIMATIC ___________________ Installing and connecting the device Industrial PC ___________________ SIMATIC IPC547E Commissioning the device ___________________ Expanded device functions Operating Instructions Expanding and assigning ___________________ parameters to the device ___________________ Device maintenance and...
  • Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Preface

    General knowledge in the field automation control engineering is recommended. Validity of the Operating Instructions These operating instructions are valid for all supplied versions of the SIMATIC IPC547E. Scope of this documentation The documentation for the SIMATIC IPC547E includes the following sections: ●...
  • Page 4 Preface SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 5: Table Of Contents

    Switching on the device ....................... 47 Automatic switching on of the device ................... 48 Windows Action Center ........................ 49 Notes on various device configurations ..................50 4.5.1 DVD burner drive ......................... 50 4.5.2 System with two drives ........................ 51 SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 6 Replacing a defective hard disk drive in the RAID system ............83 7.4.1.5 Installing a 5.25" front hard disk drive ..................87 7.4.1.6 Removing and installing a DVD drive ..................88 7.4.2 Removing the device fan ......................90 SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 7 Overview of AMT........................130 8.7.3 Activate AMT ..........................130 8.7.4 Advanced settings ........................131 8.7.5 Reset AMT with Unconfigure ME ....................132 8.7.6 Determining the network address ....................133 8.7.7 Forcing user consent ......................... 133 SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 8 Troubleshooting ........................136 A.2.1 General information ........................136 A.2.2 RAID system and device startup ....................137 Notes on the use of third-party modules ................... 138 List of abbreviations ..........................139 Glossary .............................. 143 Index ..............................149 SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 9: Overview

    Depending on the configuration ordered the features and illustrations described in this manual may differ from the features of your device. The SIMATIC IPC547E is a powerful industrial PC in 19" rack format design (4 HE). It is perfectly suited for high-performance industrial PC applications.

  • Page 10: Scope Of Application

    ● RAID1 – Disk mirroring on two drives, "hot swap" in connection with SATA removable drive bays ● RAID5 – Striping with parity on three drives, "hot swap" in connection with SATA removable drive bays ● Redundant power supply SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 11 Depending on the configuration ordered the features and illustrations described in this manual may differ from the features of your device. Basic data SIMATIC IPC547E SIMATIC IPC547E with short enclosure Design 19" rack, 4 HU 19" rack, 4 HU •...
  • Page 12 Overview 1.1 Product description Monitoring and safety functions SIMATIC IPC547E SIMATIC IPC547E with short enclosure Temperature Violation of high/low limits of permitted operating temperature • Speed monitoring • Watchdog Monitoring functions for program execution • Monitoring time can be parameterized in software •...
  • Page 13 You will find the languages that can be installed on the Recovery DVD. Language Microsoft Windows 7 Microsoft Windows Ultimate Server 2008 R2 (32-bit and 64-bit) (64-bit) German English French Italian Spanish Japanese Chinese, Hong Kong Chinese, simplified Chinese, Taiwan Russian SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 14: Device Configuration

    Overview 1.2 Device configuration Device configuration Device front with open front door SIMATIC IPC547E SIMATIC IPC547E with short enclosure ① Fan cover Fan cover with openings for ventilation of the device ② Status displays See chapter "Status displays (Page 20)."...
  • Page 15 Overview 1.2 Device configuration Rear of the device SIMATIC IPC547E SIMATIC IPC547E with short enclosure ① Power supply See section "Interfaces and connections (Page 16)", power supply connection ② Air outlet ③ Interfaces See chapter "Interfaces and connections (Page 16)."...

  • Page 16: Interfaces And Connections

    Overview 1.3 Interfaces and connections Interfaces and connections Interfaces SIMATIC IPC547E SIMATIC IPC547E with short enclosure ① Mouse Connection for a PS/2 mouse ② Keyboard Connection for a PS/2 keyboard ③ 4 x USB 2.0 Connections for USB devices SIMATIC IPC547E...
  • Page 17 Connections for USB devices, backward compatible with USB 2.0/1.1 ⑨ LAN 1 RJ45 Ethernet connections for 10/100/1000 Mbps LAN 2 LAN 1 is iAMT capable (for SIMATIC IPC547E only) LAN1 ⑩ 2 x USB 2.0 Connections for USB devices ⑪...

  • Page 18: Operator Controls

    • Pull the power plug on the rear of the device. • For control cabinet mounting: Take additional precautions, for example, by using a circuit breaker. Read the information in section "Switching off the device (Page 53)". SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 19 The On/off button is located on the front of the device behind the front door and is used to start and shut down the operating system. You can find additional information in the chapters "Switching on the device (Page 47)" and "Switching off the device (Page 53)." SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 20: Status Displays

    It may be possible to detect the defective drive with the RAID software, see chapter "RAID1 system (Page 51)", "RAID5 system (Page 52)" or "RAID system with hot spare drive (Page 52)". SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 21 Power supply module is operating. If there is no redundancy, you will hear an acoustic signal permanently. Redundancy is in effect when both power supply modules are operating. Not lit: • Power supply module is out of service. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 22 Overview 1.5 Status displays SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 23: Safety Instructions

    When you open the control cabinet, some areas or components may be carrying life- threatening voltages. If you touch these areas or components, you may be killed by electric shock. Switch off the power supply to the cabinet before opening it. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 24 • Observe the safety and installation instructions for the expansion cards. • If necessary, install the device in an enclosure that meets the requirements of paragraphs 4.6 and 4.7.3 of the standards EN 60950-1:2006 and IEC/UL/EN/DIN-EN 60950-1. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 25 • Remove radiation sources from the environment of the device. • Switch off radiating devices. • Reduce the radio output of radiating devices. • Please observe the information on electromagnetic compatibility in the technical specifications. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 26 ESD directive in the technical specifications. Industrial Security Siemens offers products and solutions with Industrial Security functions that support the safe operation of equipment, solutions, machines, devices and/or networks. They are important components in a comprehensive Industrial Security concept. As a result the products and solutions from Siemens are constantly evolving.

  • Page 27: Headphones

    • If the device has a on/off button, assign the parameters of the function of the on/off button to meet your requirements under Windows. You can find the settings in the "Power Options" menu. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 28: Notes On Use

    E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e. g. use of power strips). SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 29 • Do not obstruct the venting slots of the device. Note Use in an industrial environment without additional protective measures This device was designed for use in a normal industrial environment according to IEC 60721-3-3. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 30 Safety instructions 2.4 Notes on use SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 31: Installing And Connecting The Device

    The device may be damaged. Do not dispose of the original packaging. Pack the device during transportation and storage. 5. Check the contents of the packaging and any accessories you may have ordered for completeness and damage. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 32 7. Please keep the enclosed documentation in a safe place. It belongs to the device. You need the documentation when you commission the device for the first time. 8. Write down the identification data of the device. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 33: Device Identification Data

    ● Rating plate The rating plate is located on the inside of the front door for the SIMATIC IPC547E and on the rear panel of the SIMATIC IPC547E with short enclosure. The rating plate of the SIMATIC IPC547E is shown below.

  • Page 34: Mounting The Device

    COA label Ethernet address 1, MAC address BIOS setup > "Main" menu Ethernet address 2, MAC address (not for SIMATIC IPC547E with short Component label enclosure) 1. Copy the order number, serial number and manufacturing version in the table listed above.
  • Page 35 ● Install the device in such a way that it does not pose a danger, for example, by falling over. Note For more details, consult the "Technical Data" in the "Ambient conditions" chapter. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 36: Mounting Location And Position

    The devices can be installed in the following ways: ● Mounting with mounting brackets, horizontal ● Mounting on device stands, horizontal ● Tower setup, vertical (not for SIMATIC IPC547E with short enclosure): You can order a Tower Kit for tower installation. ● Mounting on telescopic rails When telescopic rails are used for mounting, the device can be withdrawn fully from the cabinet or rack.
  • Page 37 The dimensions for the mounting holes are listed in the chapter "Dimension drawing for the drilling holes of telescopic rails (Page 113)". Mounting holes for SIMATIC IPC547E Mounting holes for SIMATIC IPC547E with short enclosure SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 38: Connecting The Device

    Make sure that the shockproof power outlet of the building installation is freely accessible and as close as possible to the device, especially when the power plug is secured with a locking power plug latch. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 39: Connection Of Equipotential Bonding

    The equipotential bonding connection on a device has a large surface and makes contact over a large area. The equipotential bonding connection is identified by the following symbol: Requirement ● T20 screwdriver SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 40: Connecting The Power Supply

    • Do not operate the device via non-grounded or impedance-grounded networks (IT networks). • Operate the device only in grounded power networks (TN networks in accordance with VDE 0100, Part 300 or IEC 60364-3). SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 41 Use a flexible cable with UL approval and CSA marking as well as the following features: ● Type SJT with three conductors ● Conductor cross-section ≥ 18 AWG ● Cable length ≤ 4.5 m ● Tandem grounding-type plug 15 A, ≥ 250 V SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 42 Note: If only one of the power supply modules works, a warning signal sounds. You turn off ③ the warning signal by pressing the button on the working power supply module. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 43: Connecting Peripheral Equipment

    Hot-plug I/O devices (USB) may be connected while the PC is in operation. NOTICE Non-hot-plug I/O devices I/O devices that do not support hot-plugging may not be connected until the device is powered off. Strictly adhere to the specifications for peripheral equipment. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 44: Connecting The Device To Networks

    Wake on LAN and Remote Boot are supported. You can use the integrated Ethernet interfaces (10/100/1000 Mbps) for communication and data exchange with automation devices, such as SIMATIC S7. You need the "SOFTNET S7" software package for this. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 45: Multi-Monitoring

    You can simultaneously operate up to five monitors on the interfaces of the integrated graphics controller in combination with the optional graphics card: (with SIMATIC IPC547E short enclosure: up to 4 monitors). Parameter assignment is performed by means of the Control Panel in Windows.
  • Page 46 Installing and connecting the device 3.3 Connecting the device SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 47: Commissioning The Device

    The"POWER" LED lights up. The module carries out a self-test. Then Windows is started. 3. Follow the instructions on the screen. The following steps are required only when switching on the device for the first time after delivery: SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 48: Automatic Switching On Of The Device

    20 seconds. Automatic startup may endanger the operation of the machine or plant, for example, after a power failure. Take the BIOS Setup entry "Power Failure Recovery" into consideration in the plant planning. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 49: Windows Action Center

    You will also receive a warning if programs attempt to modify important Windows settings. Configure the Security Center according to your requirements. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 50: Notes On Various Device Configurations

    Data comparison is the only guarantee that data has been written correctly. Perform data comparison each time you burn a disc. See also General technical specifications (Page 114) SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 51: System With Two Drives

    RAID controller in the RAID documentation in the ® "Drivers\RAID\Intel" directory on the "Documentation and Drivers" DVD that ships with the product. Additional information on RAID1 systems can be found in the section "Managing RAID systems (Page 67)". SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 52: Raid5 System

    ● Information on integration of a replaced hot spare drive into the RAID system is available in the section "Integrating a hot spare hard disk drive in the RAID system (Page 74)". See also Status displays (Page 20) SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 53: Switching Off The Device

    If the device was mounted in a control cabinet: ● Shut down the operating system and switch the AC circuit breaker to "Off". The device is switched off and fully disconnected from the mains voltage. No trickle current is flowing. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 54 Data on the drive may be lost. The device may be damaged. Perform a hardware reset only in the case of an emergency. For all operating systems: ● Press the on/off button for more than 4 seconds. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 55: Expanded Device Functions

    The SIMATIC IPC DiagMonitor software offers additional alarm and linking options in addition to the local monitoring functions of the SIMATIC IPC DiagBase software and includes: ● The software for the stations to be monitored. ● A library for creating user-specific applications. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 56: Temperature Monitoring And Temperature Display

    You can reset the error message with one of the following measures: ● Acknowledge error message with SIMATIC IPC DiagBase or SIMATIC IPC DiagMonitor ● Short-term disconnection of the device from the power supply ● Shut down device ● Restart the device SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 57: Fan Monitoring

    Restarts the operating system when the watchdog expires Shutdown Shuts down the operating system when the watchdog expires NOTICE "Reset on" option The "Reset on" option immediately triggers a hardware reset that may result in loss of data under Windows. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 58: Battery Monitoring

    Additional information is available in the section "Description of Active Management Technology (Page 127)". Remote maintenance is only available for devices with Intel® Core™ i5 or Intel® Core™i7 processors. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 59: Trusted Platform Module (Tpm)

    The warranty does not cover a reset of the hardware in the event of a loss of a password. Please store the password carefully and make sure it is protected against unauthorized access. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 60 Expanded device functions 5.3 Trusted Platform Module (TPM) SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 61: Expanding And Assigning Parameters To The Device

    Procedure for SIMATIC IPC547E 1. Open the front door with the key. 2. Pull the front door downwards. Procedure for SIMATIC IPC547E with short enclosure 1. Open the front door in the direction of the arrow. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 62: Remove The Fan Cover

    The device contains electronic components which are destroyed by electrostatic charges. This can result in malfunctions and damage to the machine or plant. Take the appropriate precautions. Additional information is available in the section "Switching off the device (Page 53)". SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 63 Limitation of liability All technical specifications and approvals apply only to expansions which are approved by the Siemens AG. We are not liable for functional limitations caused by the use of third-party devices or components. Observe the installation instructions for the components. UL approval of the device is valid only if UL-approved components are used in observance of their intended purpose ("Conditions of Acceptability").

  • Page 64: Memory Expansion

    Depending on the device version there are two or four slots for memory modules on the motherboard. You can expand the memory up to 32 GB (for SIMATIC IPC547E with short enclosure up to 16 GB). Of which 3.2 GB can be used in a 32-bit operating system.
  • Page 65 7. Secure the card retainer with the screw If you are installing a short expansion card, remove the locking screw from the card retainer and install it in the opposite hole. 8. Close the device. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 66 Expanding and assigning parameters to the device 6.5 Installing expansion cards SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 67: Device Maintenance And Repair

    "Documentation and Drivers" DVD. 7.1.2 Example for a RAID5 system during the boot phase of the system You can configure RAID hardware with <CTRL-I>. The associated description is available on the "Documentation and Drivers" DVD. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 68: Raid Software

    1. Select the RAID software via "Start > Programs > Intel Rapid Storage Technology". 2. Select "Manage" > "Advanced" to display details of the RAID system. 3. Select "Help" > "System Report" > "Save" to create a report with the details of the RAID system. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 69: Checking The Status Of The Raid System

    Execution of keyboard, mouse or touch screen commands may be briefly delayed in extreme situations. This could result in operator errors on the machine or plant. Do not operate safety-critical functions when a hard disk has failed. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 70: Displaying A Defective Hard Disk Of A Raid System In The Raid Software

    You can find information on how to detect and replace a defective hard disk in the RAID system in the section "Replacing a defective hard disk drive in the RAID system (Page 83)". SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 71: Special Feature: Replacing Hard Disk In The Raid System When Switched Off

    You can configure the manual integration of the hard disk or check the settings yourself. 1. Select "Start" > "Programs" > "Intel Rapid Storage Technology". 2. Select the "Preferences" menu. 3. Go to the "Automatic Rebuild" area and deactivate the "Auto-rebuild on hot plug" option. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 72 1. Reboot the device. The RAID software automatically integrates the hard disk. 2. Click on the link "Rebuild to another Disk". Synchronization of the RAID system is initiated after clicking the link "Rebuild to another disk". SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 73 "unused" is displayed for the corresponding SATA port. You can install the functioning hard disk while the system is running. The new hard disk is then assigned to a SATA port and is integrated into the RAID system. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 74: Integrating A Hot Spare Hard Disk Drive In The Raid System

    Replacement interval Drives 3 years Backup battery 5 years Device fan 3 years Filter pad Depending on the degree of soiling For information on ordering original replacement parts, see chapter "Service and support (Page 135)". SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 75: Changing The Filter Pad

    RF suppression. Contact your technical support team or where you purchased your PC to find out which system expansion devices may be installed. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 76 ● T20 screwdriver for protective conductor connection and enclosure ● T6 screwdriver for removing and installing the DVD drive ● T10 screwdriver for all of the remaining screws See also ESD guideline (Page 109) Spare parts and repairs (http://support.automation.siemens.com/WW/view/en/16611927) SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 77: Removing And Installing Hardware

    ● The device is open, see the section "Open the device (Page 62)". ● The front door is open, see chapter "Opening the front door (Page 61)". Procedure Removal 1. Remove the highlighted screws. 2. Remove the accessible power supply and data cables from the drives. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 78 3. Hold the drive cage at the marked areas, push it in the direction of the arrow, then lift the drive cage completely out of the device. Installation Follow the steps described under removal in the reverse order. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 79: Removing And Installing The Hard Disk Drive From The Removable Drive Bay

    4. Now grip the handle to the right of the notch from where it was pulled out, and pull the tray all the way out of the removable drive bay. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 80 1. Carefully insert the new drive into the tray. Take care not to touch the contacts of the drive when you do this. 2. Fasten the new drive with the screws to the base of the tray. Only use the original screws. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 81: Removing And Installing An Internal Hard Disk

    ● The device is open, see the chapter "Open the device (Page 62)". ● T10 screwdriver Procedure Removal SIMATIC IPC547E SIMATIC IPC547E with short enclosure 1. - Open the front door. 2. - Loosen the two highlighted screws and remove the front panel.
  • Page 82 Device maintenance and repair 7.4 Removing and installing hardware SIMATIC IPC547E SIMATIC IPC547E with short enclosure The internal hard disks are located on the side wall of the The internal hard disks are located on the front wall of the device.

  • Page 83: Replacing A Defective Hard Disk Drive In The Raid System

    The new hard disk drive can be integrated into the RAID1 system at operating system level with the RAID software. Synchronization may take several hours, depending on system load. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 84 Internal hard disk drive or hard disk drive in removable drive bay Status display RAID BIOS RAID software SATA connection of Drive the motherboard HDD0 alarm Port 0 Device port 0 SATA 0 HDD1 alarm Port 1 Device port 1 SATA 1 SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 85 ① Removable drive bay 0 ② Removable drive bay 1 ③ Removable drive bay 2 ④ Removable drive bay 3 ⑤ "Power" LED; power supply available ⑥ "HDD" LED, access to hard disk drive SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 86 3. Replace the defective hard disk drive with a drive of the same type and capacity. Information about the recovery of the RAID system can be found in the section "Integrating the new hard disk drive in the RAID system". SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 87: Installing A 5.25" Front Hard Disk Drive

    Take care not to touch the contacts of the drive when you do this. 3. Fasten the 5.25"hard disk drive with the screws to the the drive cage. The figure below shows the possible positions of the screws on the left side of the drive cage. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 88: Removing And Installing A Dvd Drive

    (Page 77)". ● T6 screwdriver Procedure Removal 1. Remove the screws on the side of the drive cage. The figure below shows the positions of the screws on the left side of the drive cage. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 89 2. Fasten the DVD drive with the screws according to the diagram on the drive cage. 3. Install the drive cage back into the device, see section "Removing and installing the drive cage (Page 77)". SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 90: Removing The Device Fan

    Use only a fan of the same type. Procedure Removal 1. Pull the fan plug from the motherboard, see labels in the following figure. 2. Remove the screws highlighted in the following figure. 3. Take the fan out of the enclosure. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 91: Replacing The Backup Battery

    ● A lithium battery recommended by the manufacturer or one that is identical Information on original spare parts for SIMATIC IPCs is available at SIMATIC IPC after- sales information system (http://www.siemens.com/asis). Procedure 1. The location of the backup battery on the motherboard and the procedure for replacing it are described in the manual of the motherboard on the supplied "Documentation and...

  • Page 92: Removing The Power Supply

    3. Remove the fixing screw that is marked in the figure below. 4. Remove the four fixing screws that are marked in the figure below. 5. Pull the power supply upward and out of the housing. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 93: Removing Module Of The Redundant Power Supply

    ● The device is open, see the chapter "Open the device (Page 62)". ● The module of the redundant power supply has been removed, see chapter "Removing module of the redundant power supply (Page 93)". ● T10 screwdriver SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 94: Removing The Motherboard

    (Page 53)". ● The device is open, see the chapter "Open the device (Page 62)". ● A motherboard The motherboard as spare part is supplied without processor and memory modules. ● T10 screwdriver SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 95 1. For installation, follow the steps for removal in reverse order. 2. Update the BIOS to match the version of the motherboard. Please note during the update if you operate a device with or without a RAID system. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 96: Replacing The Processor

    Only an approved processor is permitted to be installed on the motherboard of the device. Information about original spare parts for SIMATIC IPCs is available on the Internet at: – SIMATIC IPC after-sales information system (http://www.siemens.com/asis) – Contacts (http://www.siemens.com/automation/partner) ● Manual of the motherboard on the supplied "Documentation and Drivers" DVD.
  • Page 97 The rest of the procedure is described in the manual for the motherboard on the supplied "Documentation and Drivers" DVD. 2. If you use a processor of a different type, perform a BIOS update. The microcode matching the processor is loaded in the process. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 98: Installing The Software

    The Restore DVD is included in the scope of delivery when you have ordered a device with operating system. The DVD contains an image file with the following software: – Operating system with installed hardware drivers – Monitoring software, e.g., DiagBase. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 99: Updating The Operating System

    The driver for the chipset has to be installed before all other drivers with a new installation of Windows Server 2008 R2 or Windows 7. Then you can install the drivers of all other devices. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 100: Installing Windows 7 Or Windows Server 2008 R2

    Press any key to boot from CD or DVD .. After a few seconds, you will see the "Install Windows" installation program. 8. Now follow the instructions in the installation program. You can find additional information on this in the next section. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 101 Please read the information in the section "Information for systems with RAID or AHCI controller". Drive options For display of additional functions that you can use to set up the data medium, (advanced) see figure "Windows installation window "Drive options (advanced)"". SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 102 Integrate this driver before you partition the data medium and before you install the operating system. For more information on integrating the storage controller, refer to the section "Information for systems with RAID or AHCI controller". SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 103 1. Connect the USB stick with the controller driver to the device. 2. Start the "Install Windows" installation program as described above. 3. Select "Load Drivers" in the Windows installation window. 4. Select the respective driver on the USB stick. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 104: Setting Up The Language Selection Using The Multilanguage User Interface (Mui)

    "Start > Control Panel > Clock, Language, and Region > Regional and Language Options" 2. You can make the required changes in the "Administrative" tab. You copy the settings by clicking the respective button. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 105: Restoring The Delivery State

    All data on drive C: will be completely deleted, reformatted and overwritten with the original factory software. ALL data, user settings as well as all authorizations or license keys on the entire drive are lost when you select the "Restore entire hard disk" option. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 106: Installing The Raid Controller Software

    (images). SIMATIC IPC Image & Partition Creator supports the burning of DVD media only. You can order the tool using the Siemens online ordering system (http://www.siemens.com/automation/mall). For more information about SIMATIC IPC Image & Partition Creator, refer to its product documentation.

  • Page 107: Technical Specifications

    Certificates and approvals ISO 9001 certificate The Siemens quality management system for our entire product creation process (development, production and sales) meets the requirements of ISO 9001:2008. This has been certified by DQS (the German society for the certification of quality management systems).

  • Page 108: Directives And Declarations

    The device meets the guidelines listed in the following sections. EC Declaration of Conformity The associated declaration of conformity is available on the Internet at the following address: SIEMENS Industry Online Support (http://support.automation.siemens.com/WW/view/en/10805661/130000). Electromagnetic compatibility This product meets the requirements of EC Directive 2004/108/EC "Electromagnetic Compatibility".

  • Page 109: Esd Guideline

    The material with which this person comes into contact is of particular significance. The figure shows the maximum electrostatic voltages with which a person is charged, depending on humidity and material. These values conform to the specifications of IEC 61000-4-2. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 110 This way, the discharge energy does not reach and damage the sensitive components. – Discharge your body electrostatically before you take a measurement at a module. Do so by touching grounded metallic parts. Always use grounded measuring instruments. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 111: Dimension Drawings

    Technical specifications 8.3 Dimension drawings Dimension drawings 8.3.1 Dimension drawing of the device SIMATIC IPC547E: Front view and top view SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 112: Dimensional Drawing For The Installation Of Expansion Cards

    Technical specifications 8.3 Dimension drawings SIMATIC IPC547E with short enclosure: Front view and top view 8.3.2 Dimensional drawing for the installation of expansion cards SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 113: Dimension Drawing For The Drilling Holes Of Telescopic Rails

    8.3 Dimension drawings 8.3.3 Dimension drawing for the drilling holes of telescopic rails SIMATIC IPC547E: Dimensions for bore holes for telescopic rails SIMATIC IPC547E with short enclosure: Dimensions for bore holes for telescopic rails SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 114: Technical Specifications

    • The device is in good working order. • The fan cover and filter pad are installed. • The device is closed. SIMATIC IPC547E: SIMATIC IPC547E with short enclosure: Order numbers 6AG4104-3..-..(for details, refer to the ordering documentation) Dimensions 433.5 x 176.5 x 445.5 (W×...
  • Page 115 Technical specifications 8.4 Technical specifications SIMATIC IPC547E: SIMATIC IPC547E with short enclosure: Current delivery (DC) +5 V; 26 A / +3.3 V; 24 A / a total of 190 W is allowed +12 V; 15 A / +12 V; 15 A –12 V;...
  • Page 116 At +5 °C up to +35 °C, without limitation; CPU up to 65 W power loss; see notes on retrofitting The device must be free of any mechanical faults when installing hard drives in removable drive bays. No mechanical interferences may be present during the burning process when using DVD burner drives. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 117 Technical specifications 8.4 Technical specifications Motherboard SIMATIC IPC547E: SIMATIC IPC547E with short enclosure: Chipset Intel LynxPoint 8 series (Q87) Intel LynxPoint 8 series (H81) ® ® Processor Intel Pentium Dual Core™ G3420 Intel® Celeron® G1820 • ® ® • (2C/2T; 3.2 GHz; 3 MB cache) (2C/2T;...
  • Page 118 Technical specifications 8.4 Technical specifications Drives Information on the drives is available in your order documents. SIMATIC IPC547E: SIMATIC IPC547E with short enclosure: SATA drive 3.5" SATA, 6 GB/s; 500 GB • 3.5" SATA, 6 GB/s; 1000 GB • Native Command Queuing is supported.
  • Page 119 Technical specifications 8.4 Technical specifications Graphics SIMATIC IPC547E: SIMATIC IPC547E with short enclosure: Graphic controller Intel HD Graphics 4400 Intel® HD Graphics 4400 • • ® (integrated in processor: (integrated in processor: Intel Pentium® Dual Core™ G3420) Intel® Celeron® G1820) ®...
  • Page 120 Technical specifications 8.4 Technical specifications SIMATIC IPC547E: SIMATIC IPC547E with short enclosure: USB 2.0 USB 2.0 HighSpeed USB 2.0 HighSpeed Back of device: Back of device: • • 6 × 500 mA / high current 6 × 500 mA / high current Internal: •...

  • Page 121: Current And Power Requirements

    ≤ 20 A ≤ 11 A ≤ 14 A ≤ 0.5 ≤ 2 A Depending on the selected device expansion Note the information in the sections "Power supply (Page 122)" and "Redundant power supply (Page 122)". SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 122: Power Supply

    The total output of the +5 V and +3.3 V voltage must be ≤ 100 W. The total current of the +12 V voltage must be ≤ 25 A. The inrush current of a plug-in module is: ● ≤ 210 A for 1.65 ms SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 123: Telescopic Rails

    3. Open the application. Microsoft Windows Server 2008 R2 1. Select in the Windows Start menu "Start" > "Run". (64-bit) incl. 5 clients 2. Enter "msinfo32" in the Open field and confirm your input with "OK". SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 124: Interrupt Assignment

    H is assigned to IRQ 0 to 15 automatically by the BIOS in PIC mode. A specific assignment cannot be forced. Interrupt PIC and APIC mode Interrupt APIC mode BIOS Default Interrupt PIC mode, e.g. DOS SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 125 PCI-IRQ A to H is assigned to IRQ 0 to 15 automatically by the BIOS in PIC mode. A specific assignment cannot be forced. Interrupt APIC mode BIOS Default Interrupt PIC mode, e.g. DOS SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 126: Setting The Bios

    Drivers" DVD that ships with the manual. Note After a BIOS update, you need to execute the "Restore Defaults" command. Executing the "Restore Defaults" command restores all BIOS settings to their original state. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 127: Description Of Active Management Technology

    An ISO file contains a memory image of the content of a CD or DVD structured in the ISO 9660 format. ● Remote reboot An AMT PC can be booted remotely from a bootable ISO file made available by another SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 128 SIMATIC IPC Remote Manager The "SIMATIC IPC Remote Manager" software is available for utilization of the AMT functions with SIMATIC IPCs. The software can be ordered from the Siemens online ordering system "Industry Mall (http://mall.automation.siemens.com)". For detailed information about "SIMATIC IPC Remote Manager", refer to the corresponding product documentation.

  • Page 129: Amt Basics

    BIOS setup. Afterwards the Intel Management Engine (Intel ME) has to be activated ® ® and set for AMT. Set the following in the Management Engine: ● Configure network for access via AMT ● Create password SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 130: Overview Of Amt

    5. Exit the BIOS with the <F10> key "Save and Exit". The AMT PC starts. 6. To access the MEBx, press the <Ctrl+P> keyboard shortcut at system power-up. 7. In the login dialog, enter the standard password "admin". SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 131: Advanced Settings

    <Fully qualified domain name>:16993" and for unencrypted connections "http://<IP address>:16992". ● WinRM: A command line program that is part of Windows as of Windows Vista. This tool can be downloaded for older Windows versions. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 132: Reset Amt With Unconfigure Me

    3. After the start, a user prompt appears asking whether you really want to discard all the settings in the Management Engine. 4. Confirm with "Y". On a German keyboard, this means pressing the <Z> key. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 133: Determining The Network Address

    2. Select the value "KVM" for "User Consent". To allow a user with administrator privileges to avoid this code query, follow these steps: 1. Select "Intel(R) AMT Configuration > User Consent" in the MEBx. 2. Enable "Opt-in configurable from remote IT". SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 134 Technical specifications 8.7 Description of Active Management Technology SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 135: Technical Support

    You can find additional information and support for the products described on the Internet at the following addresses: ● Technical support (http://www.siemens.de/automation/csi_en_WW) ● Support request form (http://www.siemens.com/automation/support-request) ● After Sales Information System SIMATIC IPC/PG (http://www.siemens.com/asis) ● SIMATIC Documentation Collection (http://www.siemens.com/simatic-tech-doku-portal) ● Your local representative (http://www.automation.siemens.com/mcms/aspa-db/en/Pages/default.aspx) ●...

  • Page 136: Troubleshooting

    If you use an adapter or extension cable for the • mouse cable make sure to check these connections as well. Contact your technical support team if the mouse pointer still does not appear on the screen after these controls and measures. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 137: Raid System And Device Startup

    BIOS setup, Boot menu: system does not boot from highest boot priority Permit RAID system in the boot priority • the RAID system Set the RAID system to be first in the boot priority order. • SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 138: Notes On The Use Of Third-Party Modules

    Different pin assignment • used was the cause of the fault. Replace the thrid-party module with a Siemens module or contact the module supplier. If the device still crashes, contact your technical support team. Insufficient output of an external Use a higher capacity power supply power supply, e.g., UPS...

  • Page 139: List Of Abbreviations

    Disk Operating System Operating system without GUI Digital Versatile Disk Digital Visual Interface Digital display interface DVI-I Digital Visual Interface Digital display interface with digital and VGA signals Extended capability port Extended parallel port SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 140 Programmable interrupt controller Preboot Execution Environment Software for running new PCs without drive data via the network RAID Redundant Array of Independent Disks Redundant drive array Random Access Memory Read-Only Memory SDRAM Synchronous DRAM SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 141 Verband Deutscher Elektrotechniker Video Graphics Array Video adapter which meets industrial standard Virtualization Technology Intel technology with which a virtually closed environment can be made available Watchdog Program monitoring with error detection and alarming SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 142 List of abbreviations SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 143: Glossary

    The chipset sits on the motherboard and connects the processor to the RAM, the graphics card, the PCI bus and the external interfaces. Configuration files These are files containing data which define the configuration after restart. Examples of such files are CONFIG.SYS, AUTOEXEC.BAT and the registry files . SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 144 This can be configured in Windows by selecting Settings > Control Panel > Energy options. Ethernet Local network (bus structure) for text and data communication with a transfer rate of 10/100/1000 Mbps. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 145 The devices connected to a LAN are called nodes. The purpose of networks is the mutual use of files, printers or other resources. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 146 Glossary License key The license key represents the electronic license stamp of a license. Siemens AG issues a license key for each software that is protected by a license. Module Modules are plug-in units for PLCs, programming devices or PCs. They are available as central modules, interface modules, expansion cards or mass storage (mass storage module).
  • Page 147 300 Mbps. Session-At-Once In session-at-once, the CD can be written to both with an audio session and a data session. The two sessions are written to at once (as in disc-at-once). SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 148 In track-at-once recording, a CD can be written to in bits in several sessions if the CD was not closed. Wake on LAN Wake on Local area network. This function allows the PC to be started via the LAN interface. SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

  • Page 149: Index

    DVD drive COA label, 33 Removing and installing, 88 COM interface DVI-I Technical specifications, 119 Connection, 17, 17 COM1 Connection, 17 COM2 Connection, 17 Component label, 33 Components sensitive to electrostatic charge, 109 Condensation, 32 SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 150 DVI-I, 17, 17 Ethernet, 17 LPT, 17 USB 2.0, 16 USB 3.0, 17 Graphic controller, 119 VGA, 17 Graphics card, 119 Interfaces Graphics memory, 119 On the device rear, 16 Parallel, 119 IT communication, 44 SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 151 Installation guidelines, 35 Radiation, 25 High frequency radiation, 25 RAID, 137 RAID controller On/off button, 19 Making known to the operating system, (See On/Off switch storage controllers) Basic power supply, 19 Redundant power supply, 19 SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 152 Setting up partitions Windows 7, Windows Sever 2008, Windows Server Vent slots, 35 2008 R2, 101 Connection, 17 SIMATIC NET, 45 SIMATIC S7, 44 Integration, 44 SIMATIC software Installing, 99 Slave drive, (System with two drives) SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 153 Index Warranty, 24 Watchdog, 12, 57 Monitoring function, 57 Monitoring times, 58 Windows 7 Installation, 100 Windows Security Center, 49 Windows Server 2008 R2 Installation, 100 SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...
  • Page 154 Index SIMATIC IPC547E Operating Instructions, 02/2014, A5E32317120-AB...

Table of Contents