10-G Sr/10-G Lr Network Module With Hardware Bypass - Cisco Firepower 9300 Hardware Installation Manual
Hide thumbs
Also See for Firepower 9300:
- Hardware installation manual (84 pages) ,
- Installation & maintenance (36 pages) ,
- Command reference manual (421 pages)
Table of Contents
Advertisement
10-G SR/10-G LR Network Module with Hardware Bypass
Note
See the
We recommend the following Cisco OM3 MTP/MPO cables.
Table 3: Cisco Cables
Cisco Part Number
CAB-ETH-40G-5M
CAB-ETH-40G-10M
CAB-ETH-40G-20M
10-G SR/10-G LR Network Module with Hardware Bypass
The following figure shows the front panel of the 10-G SR and 10-G LR fail-to-wire network modules
FPRK9-NM-6X10SR-F, FPR9K-NM-6X10LR-F, ). This is a single-wide module that does not support hot
swapping. The six ports are numbered from top to bottom, left to right. Pair ports 1 and 2, 3 and 4, and 5 and
6 to form hardware bypass paired sets.
Figure 15: FPR9K-NM-6X10SR-F, FPR9K-NM-6X10LR-F
1
Cisco Firepower 9300 Hardware Installation Guide
22
Cisco 40GBASE QSFP Modules Data Sheet
Captive screw/handle
for specifications of the QSFP for the 40-G BASE-SR-4.
Cable Length
5 m
10 m
20 m
2
6 network activity LEDs
• Amber—No connection, or port is not
in use, or no link or network failure.
• Green—Link up, no network activity.
• Green, flashing—Network activity.
Overview
Hide quick links:
Advertisement
Table of Contents
