Page 1: Digital Video Camera
Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DCR-TRV Serial No.
Page 2: Declaration Of Conformity
Congratulations on your purchase of this Sony Handycam. With your Handycam, you can capture life’s precious moments with superior picture and sound quality. Your Handycam is loaded with advanced features, but at the same time it is very easy to use. You will soon be producing home video that you can enjoy for years to come.
Page 3 Declaration of Conformity Trade Name: SONY Model No.: DCR-TRV25, DCR- TRV27 Responsible Party:Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell, NJ07649 U.S.A. Telephone No.: 201-930-6972 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.: (1) This device...
Page 4: Main Features
(p. 169, 173) •Viewing images recorded on a tape using the USB cable (p. 165) •Capturing images on your computer from your camcorder using the USB cable (p. 166) •Converting an analog signal into digital to capture images onto your computer (p.
Page 5 Main Features Other uses Functions for adjusting exposure in the recording mode •BACK LIGHT (p. 33) •NightShot/Super NightShot/Color Slow Shutter (p. 34) •PROGRAM AE (p. 58) •Adjusting the exposure manually (p. 60) Functions for giving images more impact •Digital zoom (p. 30) The default setting is OFF.
Page 6: Table Of Contents
Table of contents Main Features ... 4 Quick Start Guide – Recording on a tape ... 8 – Recording on a “Memory Stick” (except DCR-TRV16) ... 10 Getting Started Using this manual ... 12 Checking supplied accessories ... 15 Step 1 Preparing the power supply ... 16 Installing the battery pack ...
Page 7 Additional Information Usable cassettes ... 194 About the “InfoLITHIUM” battery pack ... 197 About i.LINK ... 199 Using your camcorder abroad ... 201 Maintenance information and precautions ... 202 Specifications ... 207 Quick Reference Identifying parts and controls ... 209...
Page 8: Recording On A Tape
EJECT in the direction of the arrow and open the lid. This chapter introduces you to the basic features to record on a tape of your camcorder. See the page in parentheses “( )” for more information. (p. 22) (p. 25)
Page 9 Adjust the viewfinder lens to your eyesight (p. 29). When you purchase your camcorder, the clock setting is set to off. If you want to record the date and time for a picture, set the clock before recording (p. 23).
Page 10: Except Dcr-Trv16
Quick Start Guide – Recording on a “Memory Stick” – Except DCR-TRV16 Connecting the power cord Use the battery pack when using your camcorder outdoors (p. 16). Open the DC IN jack cover. AC power adaptor (supplied) Inserting a “Memory Stick”...
Page 11 Adjust the viewfinder lens to your eyesight (p. 29). When you purchase your camcorder, the clock setting is set to off. If you want to record the date and time for a picture, set the clock before recording (p. 23).
Page 12: Getting Started
The DCR-TRV27 is the model used for illustration purposes. Otherwise, the model name is indicated in the illustrations. Any differences in operation are clearly indicated in the text, for example, “DCR-TRV27...
Page 13 Using this manual Note on Cassette Memory Your camcorder is based on the DV format. You can use only mini DV cassettes with your camcorder. We recommend that you use a tape with cassette memory Functions that require different operations depending on whether or not the tape has a cassette memory are: –...
Page 14: Precautions On Camcorder Care
These points are normal in the manufacturing process and do not affect the recording in any way. •Do not let your camcorder become wet. Keep your camcorder away from rain and sea water. Letting your camcorder become wet may cause your camcorder to malfunction.
Page 15: Checking Supplied Accessories
Checking supplied accessories Make sure that the following accessories are supplied with your camcorder. 1 Wireless Remote Commander (1) (p. 216) 2 AC-L10A/L10B/L10C AC power adaptor (1), Power cord (1) (p. 22) 3 Size AA (R6) battery for Remote Commander (2) (p. 216) 4 Battery pack (1) (p.
Page 16: Step 1 Preparing The Power Supply
(2) Slide the battery pack out in the direction of the arrow while pressing BATT down. If you use the large capacity battery pack If you install the NP-FM70/QM71/FM90/FM91/QM91 battery pack on your camcorder, extend its viewfinder. BATT release button...
Page 17: Charging The Battery Pack
See page 197 for details of “InfoLITHIUM” battery pack. (1) Open the DC IN jack cover. Connect the AC power adaptor supplied with your camcorder to the DC IN jack on your camcorder with the plug’s v mark facing up.
Page 18: Charging Time
The remaining battery time indicator in the display window indicates the approximate recording time when recording using the viewfinder. Until your camcorder calculates the actual remaining battery time “– – – – min” appears in the display window. When you use the AC power adaptor Place the AC power adaptor near a wall outlet.
Page 19: Recording Time
Step 1 Preparing the power supply Recording time DCR-TRV16/TRV18 Battery pack NP-FM30 (supplied) NP-FM50 NP-FM70 NP-QM71 NP-FM90 NP-FM91/QM91 DCR-TRV25 Battery pack NP-FM50 (supplied) NP-FM70 NP-QM71 NP-FM90 NP-FM91/QM91 DCR-TRV27 Battery pack NP-FM50 (supplied) NP-FM70 NP-QM71 NP-FM90 NP-FM91/QM91 Approximate minutes when you use a fully charged battery * Approximate number of minutes when recording while you repeat recording start/ stop, zooming and turning the power on/off.
Page 20: Playing Time
Step 1 Preparing the power supply Playing time DCR-TRV16/TRV18 Battery pack NP-FM30 (supplied) NP-FM50 NP-FM70 NP-QM71 NP-FM90 NP-FM91/QM91 DCR-TRV25 Battery pack NP-FM50 (supplied) NP-FM70 NP-QM71 NP-FM90 NP-FM91/QM91 DCR-TRV27 Battery pack NP-FM50 (supplied) NP-FM70 NP-QM71 NP-FM90 NP-FM91/QM91 Approximate minutes when you use a fully charged battery Playing time Playing time on LCD screen...
Page 21 Approximate recording time and continuous playing time at 25 °C (77 °F). The battery life will be shorter if you use your camcorder in a cold environment. If the power goes off although the remaining battery time indicator indicates that...
Page 22: Connecting To A Wall Outlet
AC power adaptor is connected to the DC IN jack, even when the power cord is not plugged into a wall outlet. Using a car battery Use a Sony Car Battery Adaptor (optional). Refer to the operating instructions of the Car Battery Adaptor for further information. 2, 3...
Page 23: Step 2 Setting The Date And Time
Step 2 Setting the date and time Set the date and time when you use your camcorder for the first time. “CLOCK SET” will be displayed each time that you set the POWER switch to CAMERA or MEMORY (except DCR-TRV16) unless you set the date and time.
Page 24 “– – – – – – – – –” and “– –:– –:– –” are recorded on the data code of the tape and the “Memory Stick” (except DCR-TRV16). Note on the time indicator The internal clock of your camcorder operates on a 12-hour cycle. •12:00 AM stands for midnight. •12:00 PM stands for noon.
Page 25: Step 3 Inserting A Cassette
Step 3 Inserting a cassette Prepare the power supply. (2) Slide OPEN/EJECT in the direction of the arrow and open the lid. The cassette compartment automatically lifts up and opens. (3) Push the center of the cassette back to insert the cassette. Insert the cassette straight as far as possible into the cassette compartment with the window facing up.
Page 26: Recording - Basics
(p. 39). Note on recording mode Your camcorder records and plays back in the SP (standard play) mode and in the LP (long play) mode. Select SP or LP in the menu settings (p. 182). In the LP mode, you can record 1.5 times as long as in the SP mode.
Page 27 – When you use a cassette with cassette memory, however, you can make the transition smooth even after ejecting the cassette if you use the END SEARCH function (p. 37). If you leave your camcorder in the standby mode for five minutes while the cassette is inserted Your camcorder automatically turns off.
Page 28: Adjusting The Lcd Screen
The LCD panel moves about 90 degrees to the viewfinder side and about 180 degrees to the lens side. When closing the LCD panel, set it vertically until it clicks, and swing it into the camcorder body. Note The viewfinder automatically turns off when using the LCD screen except in the mirror mode (p.
Page 29: Adjusting The Brightness Of The Lcd Screen
Recording a picture Adjusting the brightness of the LCD screen (1) Set the POWER switch to CAMERA, VCR or MEMORY (except DCR-TRV16). Turn the SEL/PUSH EXEC dial to select LCD BRIGHT in settings (p. 178), then press the dial. (2) Turn the SEL/PUSH EXEC dial to adjust the brightness of the LCD screen with LCD BRIGHT, then press the dial.
Page 30: Digital Zoom (P
Recording a picture Using the zoom feature Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom. Using the zoom function sparingly results in better-looking recordings. W: For wide-angle (subject appears farther away) T : For telephoto (subject appears closer) To use zoom greater than 10 Zoom greater than 10 is performed digitally.
Page 31: Shooting With The Mirror Mode
Recording a picture Shooting with the Mirror Mode This feature allows the camera subject to view him-or herself on the LCD screen. The subject uses this feature to check his or her own image on the LCD screen while you look at the subject in the viewfinder.
Page 32 Recording a picture Indicators displayed in the recording mode Indicators are not recorded on tapes. JUL 4 2002 Remaining battery time indicator during recording The indicator shows the approximate continuous recording time. The indicator may not be correct, depending on the conditions in which you are recording. When you close the LCD panel and open it again, it takes about one minute for the correct remaining battery time in minutes to be displayed.
Page 33: Shooting Backlit Subjects - Back Light
Recording a picture Shooting backlit subjects – BACK LIGHT When you shoot a subject with the light source behind the subject or a subject with a light background, use the backlight function. Set the POWER switch to CAMERA or MEMORY (except DCR-TRV16), press BACK LIGHT.
Page 34: Shooting In The Dark - Nightshot/Super Nightshot/Color Slow Shutter
Recording a picture Shooting in the dark – NightShot/Super NightShot/Color Slow Shutter You can shoot a subject in a dark place. For example, you can satisfactorily record the environment of nocturnal animals for observation when you use this function. Using NightShot Set the POWER switch to CAMERA or MEMORY (except DCR-TRV16), slide NIGHTSHOT to ON.
Page 35 Notes •Do not use the NightShot mode in bright places (e.g. the outdoors in the daytime). This may cause your camcorder to malfunction. •When you keep NIGHTSHOT set to ON in normal recording, the picture may be recorded in incorrect or unnatural colors.
Page 36: Self-Timer Recording (Except Dcr-Trv16)
Recording a picture Self-timer recording – Except DCR-TRV16 Recording with the self-timer starts in 10 seconds automatically. You can also use the Remote Commander for this operation. (1) In the standby mode, press MENU, then select SELFTIMER in SEL/PUSH EXEC dial (p. 177). (2) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
Page 37: Checking Recordings - End Search/Editsearch/Rec Review
Press the – side of EDITSEARCH momentarily in the standby mode. The section you have stopped most recently will be played back for a few seconds, and then your camcorder will return to the standby mode. You can monitor the sound from the speaker or headphones.
Page 38: Playback - Basics
To stop playback Press x. When monitoring on the LCD screen You can turn the LCD panel over and move it back to the camcorder body with the LCD screen facing out. If you leave the power on for a long time Your camcorder gets warm.
Page 39: To Display The Screen Indicators - Display Function
Playing back a tape To display the screen indicators – Display function Press DISPLAY on your camcorder or the Remote Commander. The indicators appear on the screen. To make the indicators disappear, press DISPLAY again. DATA CODE About date/time and various settings Use the Remote Commander for this operation.
Page 40: Various Playback Modes
– The tape was recorded by a camcorder without the date and time set. Data code The data code is displayed on the TV screen if you connect your camcorder to the TV. Remaining battery time indicator during playback The indicator shows the approximate continuous playback time. The indicator may not be correct, depending on the conditions in which you are playing back.
Page 41 •The previous picture may remain as a mosaic image during playback. When the playback pause mode lasts for five minutes Your camcorder automatically enters the stop mode. To resume playback, press N. Slow playback The slow playback can be performed smoothly on your camcorder. However, this function does not work for an output signal through the DV IN/OUT jack.
Page 42: Viewing The Recording On Tv
When monitoring playback pictures on the TV screen, we recommend that you power your camcorder from a wall outlet using the AC power adaptor (p. 22). Refer to the operating instructions of your TV.
Page 43: Advanced Recording Operations
You can record still images on a “Memory Stick” in the tape recording or standby mode. You can also record still images on a tape (p. 46). Before operation •Insert a “Memory Stick” into your camcorder (p. 106). •Set PHOTO REC in MEMORY.) (1) In the standby mode, keep pressing PHOTO lightly until a still image appears.
Page 44 “Memory Stick” For more information, see page 105. Notes •Do not shake or strike your camcorder when you record still images. The image may fluctuate. •You cannot record still images on a “Memory Stick” during following operations. The indicator fashes: –...
Page 45 You can record still images on a “Memory Stick” with the self-timer. You can also use the Remote Commander for this operation. Before operation •Insert a “Memory Stick” into your camcorder (p. 106). •Set PHOTO REC in MEMORY.) (1) In the standby mode, press MENU, then select SELFTIMER in SEL/PUSH EXEC dial (p.
Page 46: Recording Still Images On A Tape - Tape Photo Recording
Notes •During tape photo recording, you cannot change the mode or setting. •When recording a still image, do not shake your camcorder. The image may fluctuate. •The tape photo recording does not work while using the following functions. The indicator flashes.: –...
Page 47 To use the tape photo recording during normal recording on a tape You cannot check the image on the screen by pressing PHOTO lightly. Press PHOTO deeper. The still image is then recorded for about seven seconds and your camcorder returns to the standby mode.
Page 48: Adjusting The White Balance Manually
Your camcorder may not adjust the white balance correctly in the INDOOR mode. In the automatic white balance mode Point your camcorder at a white subject for about 10 seconds after setting the POWER switch to CAMERA to get a better adjustment when: –...
Page 49: Using The Wide Mode
Pictures recorded in the 16:9WIDE mode automatically appear on the TV screen at full size when: – You connect your camcorder to a TV that is compatible with the video ID (ID-1/ID-2) system. – You connect your camcorder to the S video jack on the TV.
Page 50 The ID-1 system sends aspect ratio (screen horizontal/vertical ratio) information (16:9, 4:3, or letter box) with video signals. ID-2 system The ID-2 system sends a copyright protection signal with ID-1 signals inserted between video signals when you connect your camcorder to other equipment using the A/V connecting cable.
Page 51: Using The Fader Function
Using the fader function You can fade in or out to give your recording a more professional appearance. STBY FADER M. FADER (mosaic) BOUNCE* OVERLAP* WIPE* DOT* STBY MONOTONE When fading in, the picture gradually changes from black-and-white to color. When fading out, the picture gradually changes from color to black-and-white.
Page 52 You cannot use the fader function. When the OVERLAP, WIPE, or DOT indicator appear in the standby mode Your camcorder automatically stores the image recorded on a tape. While the image is being stored, the indicators flash fast, and the playback picture disappears. At this stage, the picture may not be recorded clearly, depending on the tape condition.
Page 53 Using the fader function While using the bounce function, you cannot use the following functions: – Focus – Zoom – Picture effect – Exposure Note on the bounce function The BOUNCE indicator does not appear in the following mode or functions: –...
Page 54: Using Special Effects - Picture Effect
Using special effects – Picture effect You can digitally process images to obtain special effects like those in films or on TV. NEG. ART [a] : The color and brightness of the picture are reversed. SEPIA : B&W : SOLARIZE [b] : The light intensity becomes clearer to make the picture look more like SLIM [c] : STRETCH [d] : The picture expands horizontally.
Page 55: Using Special Effects - Digital Effect
You can slow down the shutter speed. The slow shutter mode is good for recording dark pictures more brightly. OLD MOVIE: You can add an old movie type atmosphere to pictures. Your camcorder automatically sets the wide mode to ON and picture effect to SEPIA, and sets the appropriate shutter speed.
Page 56 Using special effects – Digital effect (1) Set the POWER switch to CAMERA. Press MENU, then select D EFFECT in with the SEL/PUSH EXEC dial (p. 176). (2) Select the desired digital effect mode in the menu settings, then press the SEL/ PUSH EXEC dial.
Page 57 Using special effects – Digital effect Notes •The following functions do not work during digital effect: – Fader – Super NightShot – Color Slow Shutter – Recording still images on a “Memory Stick” in the tape recording or standby mode (except DCR-TRV16) –...
Page 58: Using The Program Ae Function
LANDSCAPE: This mode is for when you are recording distant subjects such as mountains, and prevents your camcorder from focusing on glass or metal mesh in windows when you are recording a subject behind glass or a screen.
Page 59 To cancel the PROGRAM AE function Set PROGRAM AE to AUTO in the menu settings. Notes • Because your camcorder is set to focus only on subjects in the middle to far distance, you cannot take close-ups in the following mode: – SPOTLIGHT –...
Page 60: Adjusting The Exposure Manually
When you adjust the exposure manually, the following functions do not work: – Color Slow Shutter – BACK LIGHT Your camcorder automatically returns to the automatic exposure mode: – If you change the PROGRAM AE mode. – If you slide NIGHTSHOT to ON.
Page 61: Focusing Manually
When you press FOCUS/INFINITY down firmly, the lens focuses on the infinity and indicator appears. When you release FOCUS/INFINITY, your camcorder returns to the manual focus mode. Use this mode when your camcorder focuses on near objects even though you are trying to shoot a distant object.
Page 62: Interval Recording
Interval recording You can make a time-lapse recording by setting the camcorder to automatically record and standby sequentially. You can achieve an excellent recording for flowering, gradual appearances, etc., with this function. (1) In the standby mode, press MENU. Select INT. REC in EXEC dial (p.
Page 63 Interval recording I NTERVAL MENU CAMERA SET SELFTIMER D ZOOM PHOTO REC 16 : 9WIDE STEADYSHOT FRAME REC INT. REC RETURN [ MENU ] : END To cancel the interval recording Perform either of the following: – Set INT. REC to OFF in the menu settings. –...
Page 64: Frame By Frame Recording - Frame Recording
You can make a recording with a stop-motion animated effect using frame recording. To create this effect, alternately move the subject a little and make a frame recording. We recommend that you use a tripod, and operate your camcorder using the Remote Commander after step 4.
Page 65: Advanced Playback Operations
•To record images that you have processed using the picture effect function, record images on a “Memory Stick” (except DCR-TRV16) (p. 117, 128), or on a VCR using your camcorder as a player. Pictures processed by picture effect functions Pictures processed by the picture effect function are not output through the DV IN/ OUT jack.
Page 66: Playing Back Tapes With Digital Effect
•To record images that you have processed the image using the digital effect function, record images on a “Memory Stick” (except DCR-TRV16) (p. 117, 128), or on a VCR using your camcorder as a player. Pictures processed by digital effect functions •Pictures processed by digital effect functions are not output through the DV IN/...
Page 67: Enlarging Images Recorded On A Tape - Tape Pb Zoom
•You cannot process externally input scenes using the PB ZOOM function with your camcorder. •You cannot record images on a tape on your camcorder when you have processed the image using the tape PB ZOOM function. However, you can record images on a VCR using your camcorder as a player.
Page 68 Enlarging images recorded on a tape – Tape PB ZOOM Pictures in the PB ZOOM Pictures in the PB ZOOM mode are not output through the DV IN/OUT jack and the (USB) jack. The PB ZOOM function is automatically canceled when you execute the following functions: –...
Page 69: Quickly Locating A Scene - Zero Set Memory
Quickly locating a scene – ZERO SET MEMORY Your camcorder goes forward or backward to automatically stop at a desired scene having a tape counter value of “0:00:00”. Use the Remote Commander for this operation. (1) In the playback mode, press DISPLAY.
Page 70: Searching The Boundaries Of Recorded Tape By Title - Title Search
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH no indicator (3) Press . or > on the Remote Commander to select the title for playback. Your camcorder automatically starts playback of the scene having the title that you selected. TITLE SEARCH...
Page 71: Searching A Recording By Date - Date Search
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH no indicator (3) Press . or > on the Remote Commander to select the date for playback. Your camcorder automatically starts playback at the beginning of the selected date. DATE SEARCH 1 SEP / 5 / 02...
Page 72: Searching For The Date Without Using Cassette Memory
Searching a recording by date – DATE SEARCH Note If one day’s recording is less than two minutes, your camcorder may not accurately find the point where the recording date changes. If a tape has a blank portion between recorded portions The date search function may not work correctly.
Page 73: Searching For A Photo - Photo Search/Photo Scan
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH no indicator (3) Press . or > on the Remote Commander to select the date for playback. Your camcorder automatically starts playback of the photo having the date that you selected. PHOTO SEARCH...
Page 74: Searching For A Photo Without Using Cassette Memory
DATE SEARCH t PHOTO SEARCH t PHOTO SCAN t no indicator (4) Press . or > on the Remote Commander to select the photo for playback. Each time you press . or > your camcorder searches for the previous or next photo.
Page 75: Editing
Dubbing a tape Using the A/V connecting cable You can dub or edit on the VCR connected to your camcorder using your camcorder as a player. Connect your camcorder to the VCR using the A/V connecting cable supplied with your camcorder.
Page 76 With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable. Connect an S video cable (optional) to the S video jacks of both your camcorder and the VCR. This connection produces higher quality DV format pictures.
Page 77 Dubbing a tape You can connect one VCR only using the i.LINK cable (DV connecting cable) See page 199 for more information about i.LINK. Pictures processed by the picture effect, the digital effect or PB ZOOM function Pictures processed by the picture effect, the digital effect or PB ZOOM function are not output through the DV IN/OUT jack.
Page 78: Dubbing Only Desired Scenes - Digital Program Editing (On Tapes)
You can duplicate selected scenes (programs) for editing onto a tape without operating the VCR. Scenes can be selected by frame. You can set up to 20 programs. Your camcorder can dub on “Memory Stick”s (except DCR-TRV16). See page 132 for more information. Unwanted scene...
Page 79: Set The Ir Setup Code
(4), to send the control signal correctly. (1) Set the IR SETUP code 1 Set the POWER switch to VCR on your camcorder. 2 Turn the power of the connected VCR on, then set the input selector to LINE. When you connect a video camera recorder, set its power switch to VCR/VTR.
Page 80 Dubbing only desired scenes – Digital program editing (on tapes) About IR SETUP codes The IR SETUP code is stored in the memory of your camcorder. Be sure to set the correct code to match your VCR. The default setting is code number 3.
Page 81 – Select PB if the button to cancel recording pause is N. (3) Setting your camcorder and the VCR to face each other Locate the infrared rays emitter of your camcorder and face it towards the remote sensor of the VCR.
Page 82 •After checking the code in “About IR SETUP codes,” set the IR SETUP or the PAUSEMODE again. •Place your camcorder at least 30 cm (12 in.) away from the VCR. •Refer to the operating instructions of your VCR. 0 : 08 : 55 : 06...
Page 83: Dv Connecting Cable
When you connect using the i.LINK cable (DV connecting cable) (optional), follow the procedure below. (1) Set the POWER switch to VCR on your camcorder. (2) Turn the power of the connected VCR on, then set the input selector to DV input.
Page 84 VCR. Set CONTROL to IR in the menu settings of your camcorder. Step 3: Adjusting the synchronization of the VCR You can adjust the synchronization of your camcorder and the VCR. Have a pen and paper ready for notes. Before operation, eject a cassette from your camcorder.
Page 85 Dubbing only desired scenes – Digital program editing (on tapes) VIDEO EDIT EDIT SET CONTROL ADJ TEST ”CUT–IN” ”CUT–OUT” IR SETUP PAUSEMODE IR TEST RETURN [ MENU ] : END Notes •When you complete step 3, the image used to adjust the syncronization is recorded for about 50 seconds.
Page 86 Dubbing only desired scenes – Digital program editing (on tapes) Operation 1: Making the program (1) Insert the tape for playback into your camcorder, and insert a tape for recording into the VCR. (2) Press MENU, then select VIDEO EDIT in (3) Turn the SEL/PUSH EXEC dial to select TAPE, then press the dial (except DCR-TRV16).
Page 87 Dubbing only desired scenes – Digital program editing (on tapes) Erasing the program you have set Erase OUT first and then IN from the last set program. (1) Turn the SEL/PUSH EXEC dial to select UNDO, then press the dial. (2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
Page 88 Dubbing only desired scenes – Digital program editing (on tapes) Operation 2: Performing the program (Dubbing a tape) Make sure your camcorder and VCR are connected, and that the VCR is set to recording pause. (When you use the i.LINK cable (DV connecting cable) this procedure is not necessary.)
Page 89: Recording Video Or Tv Programs
LCD in the menu settings. (The default setting is LCD.) (1) Insert a blank tape (or a tape you want to record over) into your camcorder. If you are recording a tape from the VCR, insert a recorded tape into the VCR.
Page 90 With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable. Connect an S video cable (optional) to the S video jacks of both your camcorder and the TV or VCR. This connection produces higher quality DV format pictures.
Page 91 (1) Insert a blank tape (or a tape you want to record over) into your camcorder, and insert the recorded tape into the VCR. (2) Set the POWER switch to VCR on your camcorder.
Page 92: Inserting A Scene From A Vcr - Insert Editing
(5) On your camcorder, locate the insert start point [b] by pressing m, then press z REC and the button on its right simultaneously. (6) First press X on the VCR, and after a few seconds press X on your camcorder to start inserting the new scene with sound.
Page 93: Inserting A Scene From A Vcr – Insert Editing
Pictures and sound at the start point and the end point may be distorted in the LP mode. To insert a scene without setting the insert end point Skip steps 3 and 4. Press x on your camcorder when you want to stop inserting.
Page 94: Audio Dubbing
(PLUG IN POWER) : Signal flow You can check recorded picture and sound by connecting your camcorder to a TV with the A/V connecting cable. Recorded sound is not output from the speaker. Check the sound by using a TV or headphones.
Page 95: Dubbing With The Audio/Video Jack
Audio dubbing Dubbing with the AUDIO/VIDEO jack AUDIO/ VIDEO : Signal flow Dubbing with the built-in microphone No connection is necessary. Note When dubbing with the AUDIO/VIDEO jack or the built-in microphone, pictures are not output through the S VIDEO jack or the AUDIO/VIDEO jack. Check the recorded picture on the screen.
Page 96: Monitoring The New Recorded Sound
(4) Press AUDIO DUB (5) Press X on your camcorder and start playing back the audio you want to record at the same time. The new sound is recorded in stereo 2 (ST2) during playback. During recording new sound, the red (6) Press x on your camcorder at the point where you want to stop recording.
Page 97 You cannot add audio to a recorded tape. We recommend that you add audio on a tape recorded with your camcorder If you add audio on a tape recorded with another camcorder, the sound quality may become worse. If you set the write-protect tab of the cassette to lock...
Page 98: Superimposing A Title
Superimposing a title If you use a tape with cassette memory, you can superimpose the title. When you play back the tape, the title is displayed for five seconds from the point where you superimposed it. (1) In the recording, standby mode, playback or playback pause, press MENU, then select TITLE in (2) Turn the SEL/PUSH EXEC dial to select (3) Turn the SEL/PUSH EXEC dial to select the desired title, then press the dial.
Page 99 You cannot superimpose a title on the portion. If the tape has a blank portion between recorded portions The title may not be displayed correctly. Titles superimposed with your camcorder •Titles are displayed by only the DV function. •The point you superimposed the title may be detected as an index signal when searching a recording with other video equipment.
Page 100: Erasing A Title
Superimposing a title Erasing a title (1) Set the POWER switch to CAMERA or VCR. (2) Press MENU, then select TITLEERASE in (p. 181). (3) Turn the SEL/PUSH EXEC dial to select the title you want to erase, then press the dial.
Page 101: Making Your Own Titles
Making your own titles You can make up to two titles and store them in the memory of your camcorder. Each title can have up to 20 characters. (1) Set the POWER switch to CAMERA or VCR. Press MENU, then select TITLE with the SEL/PUSH EXEC dial (p.
Page 102: To Change A Title You Have Stored
1. We recommend setting the POWER switch to VCR or removing the cassette so that your camcorder does not automatically turn off while you are entering title characters. To delete the title Select [C]. The last character is erased.
Page 103: Labeling A Cassette
Labeling a cassette If you use a cassette with cassette memory, you can label a cassette. Labels can consist of up to 10 characters and are stored in cassette memory. When you insert the labeled cassette and set the POWER switch to CAMERA or VCR, the label is displayed for about five seconds.
Page 104: Erasing All The Data In Cassette Memory
Labeling a cassette To erase the label you have made In step 4 turn the SEL/PUSH EXEC dial to select [C], then press the dial. The last character is erased. To change the label you have made Insert the cassette to change the label, and operate in the same way to make a new label. If you set the write-protect tab of the cassette to lock You cannot label the tape.
Page 105: Memory Stick" Operations
Your camcorder compresses picture data in MPEG format (extension .mpg). Typical image data file name Still image 100-0001: This file name appears on the screen of your camcorder. Dsc00001.jpg: This file name appears on the display of your personal computer. Moving picture MOV00001: This file name appears on the screen of your camcorder.
Page 106 Press the “Memory Stick” once lightly. While the access lamp is lit or flashing Do not shake or knock your camcorder because your camcorder is reading the data from the “Memory Stick” or recording the data on the “Memory Stick.” Do not turn the power off or eject the “Memory Stick”.
Page 107: Selecting The Still Image Quality Mode
Using a “Memory Stick” – Introduction Selecting the still image quality mode You can select the image quality mode in still image recording. The default setting is FINE. (DCR-TRV18 only). The default setting is SUPER FINE. (DCR-TRV25/TRV27 only). (1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch is set to the left (unlock) position.
Page 108: Image Quality Settings
The number of images you can shoot in the currently selected image quality appears on the screen. Meaning This is the highest image quality in your camcorder. The number of still images you can record is less than in FINE mode. Super fine images are compressed to about 1/3.
Page 109: Selecting The Image Size
Using a “Memory Stick” – Introduction Selecting the image size Still images: DCR-TRV25/TRV27: You can select either of two image sizes. 1152 864 or 640 480 (When the POWER switch is set to CAMERA or VCR, the image size is automatically set to 640 480.) The default setting is 1152 864.
Page 110 80 images 25 images 50 images 80 images 160 images 37 images 74 images 120 images 240 images 864 still image with your camcorder and attempt to play back the Indicator 1152 32MB 64MB 128MB (optional) (optional) (optional) 51 images...
Page 111 20 sec. 5 min. 160 112 20 sec. The table shows approximate number of still images and times of moving pictures you can record on a “Memory Stick” formatted on your camcorder. Type of “Memory Stick”s 16MB 32MB (optional) (optional) 2 min.
Page 112: Recording Still Images On A "Memory Stick" - Memory Photo Recording
– Except DCR-TRV16 You can record still images on “Memory Stick”s. Before operation Insert a “Memory Stick” into your camcorder. (1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to the left (unlock) position.
Page 113 You can neither turn off the power nor press PHOTO. When you press PHOTO on the Remote Commander Your camcorder immediately records the image that is on the screen when you press the button. When you press PHOTO lightly in step 2 The image momentarily flickers.
Page 114: Recording Images Continuously
You can record still images continuously. Select one of the following modes in BURST in the menu settings before recording. NORMAL* [a] Your camcorder shoots up to four still images in 1152 864 size or 13 still images in 480 size at about 0.5 sec intervals. ( EXP BRKTG (Exposure bracketing)* Your camcorder automatically shoots three images at about 0.5 sec intervals at different...
Page 115 During recording images continuously The flash (optional) does not work. When shooting with the self-timer function or the Remote Commander Your camcorder automatically records up to the maximum recordable number of still images. When selecting NORMAL* Recording continues up to the maximum number of still images during pressing PHOTO deeper.
Page 116: Self-Timer Memory Photo Recording
PHOTO To cancel self-timer Set SELFTIMER to OFF in the menu settings while your camcorder is in the standby mode. You cannot cancel self-timer with the Remote Commander. Note The self-timer is automatically canceled when: –...
Page 117: Recording An Image From A Tape As A Still Image
– Except DCR-TRV16 Your camcorder can read moving picture data recorded on a tape and record it as a still image on a “Memory Stick”. Your camcorder can also capture moving picture data through the input connector and record it as a still image on a “Memory Stick”.
Page 118: Recording A Still Image From External Equipment
With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable. Connect an S video cable (optional) to the S video jacks of both your camcorder and the TV or VCR. to LCD in the menu settings. (The default setting is LCD.)
Page 119 Recording an image from a tape as a still image Using the i.LINK cable (DV connecting cable) DV OUT : Signal flow i.LINK cable (DV connecting cable) (optional) Note In the following instances, recording is interrupted or “ – When recording on a tape in a poor recording state, for example, on a tape that has been repeatedly used for dubbing –...
Page 120: Superimposing A Still Image In The "Memory Stick" On An Image - Memory Mix
Superimposing a still image in the “Memory Stick” on an image – MEMORY MIX – Except DCR-TRV16 You can superimpose a still image you have recorded on the “Memory Stick” on the moving picture you are recording. You can record the superimposed images on a tape or a “Memory Stick.”...
Page 121: Recording Superimposed Images On A Tape
Recording superimposed images on a tape Before operation • Insert a tape for recording into your camcorder. • Insert a “Memory Stick” with recorded still images into your camcorder. (1) Set the POWER switch to CAMERA. (2) Press MEMORY MIX.
Page 122 Image data modified on your computer or shot with other equipment You may not be able to play back modified images with your camcorder. When you select M. OVERLAP You cannot change the still image or the mode setting.
Page 123 Image size is automatically set to 640 480. Before operation Insert a “Memory Stick” including still images into your camcorder. (1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to the left (unlock) position.
Page 124 •When the overlapping still image has a large amount of white, the thumbnail image of the picture may not be clear. Image data modified on your computer or shot with other equipment You may not be able to play back modified images with your camcorder. During recording You cannot change the mode setting.
Page 125: Recording Moving Pictures On A "Memory Stick" - Mpeg Movie Recording
(2) Press START/STOP. Your camcorder starts recording. The camera recording lamp located on the front of your camcorder lights up. Picture and sound are recorded up to the remaining capacity of the “Memory Stick.” For more information about recording time, see page 111.
Page 126 Various settings cannot be recorded. During recording on a “Memory Stick” Do not eject the cassette tape from your camcorder. During ejecting the tape, sound is recorded on the “Memory Stick.” When the POWER switch is set to MEMORY (DCR-TRV25/TRV27 only) The angle of view is slightly larger compared with the angle of view when the POWER switch is set to CAMERA.
Page 127: Self-Timer Mpeg Movie Recording
Recording moving pictures on a “Memory Stick” – MPEG movie recording Self-timer MPEG movie recording You can record moving pictures on “Memory Stick”s with the self-timer. You can also use the Remote Commander for this operation. (1) Set the POWER switch to MEMORY. Make sure that the LOCK is set to the left (unlock) position.
Page 128: Recording Pictures From A Tape As A Moving Picture
– Except DCR-TRV16 Your camcorder can read moving picture data recorded on a tape and record it as a moving picture on a “Memory Stick.” Your camcorder can also capture moving picture data through the input connector and record it as a moving picture on a “Memory Stick.”...
Page 129 Various settings are not recorded. Data codes recorded on a tape cannot be recorded on a “Memory Stick”. If “ AUDIO ERROR” is displayed Sound that cannot be recorded by your camcorder has been recorded. Connect the A/V connecting cable to input images from external equipment used to play back the imag (p. 130).
Page 130: Recording A Moving Picture From External Equipment
With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable. Connect an S video cable (optional) to the S video jacks of both your camcorder and the TV or VCR. to LCD in the menu settings. (The default setting is LCD.)
Page 131 Recording pictures from a tape as a moving picture Using the i.LINK cable (DV connecting cable) DV OUT : Signal flow i.LINK cable (DV connecting cable) (optional) Note In the following instances, recording is interrupted or “ and you cannot record pictures. –...
Page 132: Recording Edited Pictures From A Tape As A Moving Picture - Digital Program Editing (On "Memory Stick"S)
– Except DCR-TRV16 You can duplicate selected scenes (programs) for editing onto “Memory Stick”s. Making the program (1) Set the POWER switch to VCR on your camcorder. (2) Insert the tape for playback, and a “Memory Stick” for recording into your camcorder.
Page 133 Recording edited pictures from a tape as a moving picture – Digital program editing (on “Memory Stick”s) Erasing the program you have set Erase OUT first and then IN from of the last program. (1) Turn the SEL/PUSH EXEC dial to select UNDO, then press the dial. (2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
Page 134 The program mark flashes. The SEARCH indicator appears during search, the EDITING indicator appears during writing of data on your camcorder, and REC appears during dubbing on the screen. The program mark changes to light blue after dubbing is complete.
Page 135: Copying Still Images From A Tape - Photo Save
Using the search function, you can automatically capture only still images from tapes and record them on a “Memory Stick” in sequence. Before operation •Insert a recorded tape into your camcorder and rewind the tape. •Insert a “Memory Stick” into your camcorder. (1) Set the POWER switch to VCR.
Page 136 Image size is automatically set to 640 480. When the access lamp is lit or flashing Do not shake or knock your camcorder. As well do not turn the power off or eject a “Memory Stick”. Otherwise, image data may become damaged.
Page 137: Viewing Still Images - Memory Photo Playback
To stop memory photo playback Press MEMORY PLAY. Note You may not be able to play back images with your camcorder: – when playing back image data modified on your computers. – when playing back image data shot with other equipment.
Page 138 Viewing still images – Memory Photo playback To play back recorded images on a TV screen •Connect your camcorder to the TV with the A/V connecting cable supplied with your camcorder before operation. •When operating memory photo playback on a TV or on the LCD screen, the image quality may appear to have deteriorated.
Page 139 You can play back six recorded images at a time. This function is especially useful when searching for a particular image. Before operation Insert a “Memory Stick” into your camcorder. (1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch is set to the left (unlock) position.
Page 140: Viewing Moving Pictures - Mpeg Movie Playback
Note You may not be able to play back images properly in the following cases: – When playing back on your camcorder image data modified on your computer – When playing back image data on other equipment. To play back recorded pictures on a TV screen •Before operation, connect your camcorder to the TV with the A/V connecting cable...
Page 141: Playing Back A Moving Picture From The Desired Part
Viewing moving pictures – MPEG movie playback Playing back a moving picture from the desired part The moving picture recorded on a “Memory Stick” is divided into 23 parts. You can select any point and playback the picture. (1) Follow steps 1 to 3 on page 140. (2) Turn the SEL/PUSH EXEC dial and select the point where you want to start playback, then press the dial.
Page 142 Viewing moving pictures – MPEG movie playback Screen indicators during moving picture playback 50min MOV00001 – – – – – – JUL 4 2002 12:05:56 AM Data directory number/File number Recording date/time Recording date/time are displayed when you press the DATA CODE button on the Remote Commander.
Page 143: Copying Images Recorded On "Memory Stick"S To A Tape
(2) Using the video control buttons, search a point where you want to record the desired image. Set the tape to playback pause mode. (3) Press z REC and the button on its right simultaneously on your camcorder. The tape is set to the recording pause mode.
Page 144 Memory playback stops. Image data modified on computers or shot with other equipment You may not be able to copy modified images with your camcorder. If you press DISPLAY during recording or in the recording standby mode You can see the memory playback and file name indicators in addition to the time code indicator and other tape-related indicators.
Page 145: Enlarging Still Images Recorded On A "Memory Stick" - Memory Pb Zoom
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch is set to the left (unlock) position. (2) In the memory playback mode, press PB ZOOM on your camcorder. The center of the image is enlarged to about twice its size, and on the screen.
Page 146 Enlarging still images recorded on a “Memory Stick” – Memory PB ZOOM The PB ZOOM mode is canceled when the following buttons are pressed: – MENU – MEMORY PLAY – MEMORY INDEX – MEMORY –/+ Moving pictures recorded on “Memory Stick”s The PB ZOOM mode does not work.
Page 147: Playing Back Images In A Continuous Loop - Slide Show
(unlock) position. (2) Press MENU to display the menu. Select SLIDE SHOW in PUSH EXEC dial (p. 180). (3) Press MEMORY PLAY. Your camcorder plays back the images recorded on the “Memory Stick” in sequence. MENU To stop the slide show Press MENU.
Page 148: Preventing Accidental Erasure - Image Protection
You can protect selected images to prevent accidental erasure of important images. Before operation Insert a “Memory Stick” into your camcorder. (1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch is set to the left (unlock) position.
Page 149: Deleting Images - Delete
You can delete all images or only selected images. Deleting selected images Before operation Insert a “Memory Stick” into your camcorder. (1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch is set to the left (unlock) position.
Page 150: Deleting All Images
Deleting all images You can delete all unprotected images in a “Memory Stick.” Before operation Insert a “Memory Stick” into your camcorder. (1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to the left (unlock) position.
Page 151: Writing A Print Mark - Print Mark
You can specify a recorded still image to print out by putting marks. This function is useful for printing out still images later. Your camcorder conforms to the DPOF (Digital Print Order Format) standard for specifying still images to print out.
Page 152: Using The Optional Printer
Using the optional printer – Except DCR-TRV16 You can use the optional printer on your camcorder to print images on print paper. For details, refer to the operating instructions of the printer. There are various ways of printing still images. The following, however, describes the...
Page 153 Using the optional printer Images recorded in the multi screen mode You cannot print images recorded in the multi screen mode on sticker type print paper. Moving pictures recorded on a “Memory Stick” You cannot print the images. When “Memory Stick” has no files “...
Page 154: Viewing Images Using Your Computer
Viewing images with your computer – Introduction There are following ways of connecting the camcorder to a computer in order to view images saved on a “Memory Stick”* or recorded on tape on your computer. * To view images on a computer which has a Memory Stick slot, first remove the “Memory Stick”...
Page 155: Viewing Images Recorded On A "Memory Stick
When connecting to a computer using the USB cable There are two methods of USB connection, NORMAL and PTP. The default setting is NORMAL. Here we explain how to use the camcorder with NORMAL USB connection. See page 157 when using Windows and page 171 when using Macintosh.
Page 156 •“Memory Stick” operations on your camcorder cannot be assured if a “Memory Stick” formatted on your computer is used on your camcorder, or if the “Memory Stick” in your camcorder was formatted from your computer when the USB cable was connected.
Page 157: Connecting Your Camcorder To Your Computer Using The Usb Cable - For Windows Users
When connecting to a computer using the USB cable You must install a USB driver onto your computer in order to connect the camcorder to the computer’s USB jack. The USB driver can be found on the CD-ROM supplied, along with the application software required for viewing images.
Page 158 Connecting your camcorder to your computer using the USB cable – For Windows users Recommended computer usage environment to view “Memory Stick” images on the computer Microsoft Windows 98, Windows 98SE, Windows Me, Windows 2000 Professional, Windows XP Home Edition or Windows XP Professional.
Page 159: Connecting Your Camcorder To Your Computer Using The Usb Cable
If you go to USBCONNECT in the menu settings and select PTP, you can copy “Memory Stick” images from the camcorder onto your computer without installing the USB driver. This is ideal for simply copying images from a camcorder onto a computer. Refer to page 183 for details.
Page 160 Connecting your camcorder to your computer using the USB cable – For Windows users Making the computer recognize the camcorder Viewing images recorded on a tape Refer to page 161 for details on viewing “Memory Stick” images on your computer (except DCR-TRV16).
Page 161 USB drivers are installed. Be sure to allow each installation to complete without interrupting them. You cannot install the USB driver if a “Memory Stick” is not in your camcorder. Be sure to insert a “Memory Stick” into your camcorder before installing the USB driver.
Page 162: If You Cannot Install The Usb Driver
If you cannot install the USB driver The USB driver has been registered incorrectly as your computer was connected to your camcorder before installation of the USB driver was completed. Perform the following procedure to correctly install the USB driver.
Page 163 Connecting your camcorder to your computer using the USB cable – For Windows users Windows 2000 Professional 6 Turn the POWER switch to OFF (CHG) on your camcorder, and then disconnect the USB cable. 7 Restart your computer. Step 2: Install the USB driver on the supplied CD-ROM Perform the entire procedure described in “Installing the USB driver”...
Page 164 6 Select “Other devices”. Select the device prefixed with the “?” mark and delete. Ex: (?)Sony Handycam 7 Turn the POWER switch to OFF (CHG) on your camcorder, and then disconnect the USB cable. 8 Restart your computer. Step2: Install the USB driver on the supplied CD-ROM Perform the entire procedure described in “Installing the USB driver”...
Page 165: Viewing Images Recorded On A Tape With Your Computer - For Windows Users
(4) Select “Start” t “Program” t “PIXELA” t “ImageMixer” t “PIXELA ImageMixer Ver.1.0 for Sony”. (5) Click on the screen. The “PIXELA ImageMixer Ver.1.0 for Sony” startup screen appears on your computer. The title screen is displayed. (6) Select to ON in the menu settings (p. 183).
Page 166 (2) Set the POWER switch to CAMERA. Select USB STREAM in (3) Follow the steps 4 to 7 on pages 165 and 166. The picture from your camcorder appears on preview window on your computer. Capturing still images (1) Select (2) Looking at the preview window, move the cursor to point you want to capture.
Page 167 – Images of different color systems to that of the camcorder are not displayed correctly. •When your camcorder is in the standby mode with a cassette inserted, it turns off automatically after five minutes. •We recommend setting DEMO MODE to OFF in the menu settings when your camcorder is in the standby mode, and no cassette is inserted.
Page 168 – For Windows users Seeing the on-line help (operating instructions) of “PIXELA ImageMixer Ver.1.0 for Sony” A “PIXELA ImageMixer Ver.1.0 for Sony” on-line help site is available where you can find the detailed operating method of “PIXELA ImageMixer Ver.1.0 for Sony”. (1) Click The ImageMixer’s Manual screen appears.
Page 169: Except Dcr-Trv16
•Set USBCONNECT in (The default setting is NORMAL.) (1) Turn on your computer and allow Windows to load. (2) Insert a “Memory Stick” into your camcorder, and connect the AC power adaptor to your camcorder. (3) Set the POWER switch to MEMORY.
Page 170: Viewing Images Recorded On A "Memory Stick" With Your
– For Windows users Image file storage destinations and image files Image files recorded with your camcorder are grouped in folders by recording mode. The meanings of the file names are as follows. ssss stands for any number within the range from 0001 to 9999.
Page 171: Connecting Your Camcorder To Your Computer Using The Usb Cable - For Macintosh Users (Except Dcr-Trv16)
When connecting to a computer using the USB cable You must install a USB driver onto your computer in order to connect the camcorder to the computer’s USB jack. The USB driver can be found on the CD-ROM supplied, along with the application software required for viewing images.
Page 172 Connecting your camcorder to your computer using the USB cable – For Macintosh users (3) Click the “USB Driver” to open the folder containing the six files related to “Driver.” (4) Select the following two files, and drag and drop them into the System Folder.
Page 173: Except Dcr-Trv16
QuickTime 3.0 or newer must be installed to play back moving pictures. (1) Turn on your computer and allow Mac OS to load. (2) Insert a “Memory Stick” into your camcorder, and connect the AC power adaptor to your camcorder.
Page 174: Capturing Images From An Analog Video Unit On Your Computer - Signal Convert Function
Depending on the analog video unit, the image may contain noise or incorrect colors. •You cannot record or capture the video output via your camcorder when the video tapes include copyright protection signals such as the ID-2 system.
Page 175: Customizing Your Camcorder
— Customizing Your Camcorder — Changing the menu settings To change the mode settings in the menu settings, select the menu items with the SEL/ PUSH EXEC dial. The default settings can partially be changed. First, select the icon, then the menu item and then the mode.
Page 176 Changing the menu settings To make the menu display disappear Press MENU. Menu items are displayed as the following icons: MANUAL SET CAMERA SET VCR SET LCD/VF SET MEMORY SET (except DCR-TRV16) PRINT SET (except DCR-TRV16) CM SET TAPE SET SETUP MENU OTHERS Selecting the mode setting of each item...
Page 177 To activate frame recording (p. 64) To activate interval recording (p. 62) To deactivate interval recording To set the waiting time and recording time for interval recording ” appears. Your camcorder prevents excessive (continued on the following page) POWER switch CAMERA...
Page 178 To output digital images and sound in analog format using your camcorder To output analog images and sound in digital format using your camcorder (p. 174) — To adjust the brightness on the LCD screen with the SEL/PUSH EXEC dial...
Page 179 • For five seconds after setting the POWER switch to VCR or MEMORY • For five seconds after inserting a “Memory Stick” into your camcorder in MEMORY or • When the capacity of the “Memory Stick” is less than two minutes in MEMORY •...
Page 180 Notes on formatting (except DCR-TRV16) •Supplied or optional “Memory Stick”s have been formatted at factory. Formatting “Memory Stick”s on your camcorder is not required. •Do not do any of the following while FORMATTING is displayed: – Switch the POWER switch –...
Page 181 Changing the menu settings Icon/item Mode PRINT SET (except DCR-TRV16) 9PIC PRINT z RETURN SAME MULTI MARKED DATE/TIME z OFF DATE DAY&TIME CM SET TITLE — TITLEERASE — TITLE DSPL z ON CM SEARCH z ON TAPE TITLE — ERASE ALL —...
Page 182 When you play back the tape on other camcorders or VCRs, noise may occur in pictures or sound. •When you record in the LP mode, we recommend using a Sony Excellence/Master cassette so that you can get the most out of your camcorder.
Page 183 To connect and recognize the “Memory Stick” drive. To connect and only copy a “Memory Stick” image from your camcorder to a computer (only with Windows XP or Mac OS X) 1 Turn the SEL/PUSH EXEC dial to select USBCONNECT followed by PTP, and press to set.
Page 184 When recording a close subject When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder may reflect on the subject if it is close. In this case, we recommend that you set REC LAMP to OFF.
Page 185: Troubleshooting
If you run into any problem using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer or local authorized Sony service facility. If “C:ss:ss” appears on the screen, the self-diagnosis display function has worked. See page 191.
Page 186 Types of trouble and how to correct trouble Symptom The picture is recorded in incorrect or unnatural colors. The picture appears too bright, and the subject does not appear on the screen. You cannot record still images on a “Memory Stick” in standby mode or while recording on tape.* You cannot record still images on a tape.*...
Page 187 Types of trouble and how to correct trouble Symptom The title search function does not work. The new sound added to the recorded tape is not heard. The title is not displayed. In the recording and playback modes Symptom The power does not turn on. The end search function does not work.
Page 188 Use a charged battery pack. (p. 16, 17) • Moisture condensation has occurred. c Remove the cassette and leave your camcorder for at least one hour to acclimatize. (p. 202) • The gold-plated connector of the cassette is dirty or dusty.
Page 189 VCR again (p. 78) • The camcorder is connected to DV equipment of other than Sony using the i.LINK cable (DV connecting cable). c Set it to IR (p. 83). • Setting program on a blank portion of the tape is attempted.
Page 190 • The battery pack is not properly installed. c Install it properly. (p. 16) • Something is wrong with the battery pack. c Contact your Sony dealer or local authorized Sony service facility. • The POWER switch is not set to OFF (CHG).
Page 191: Self-Diagnosis Display
After reconnecting the power supply, operate your camcorder. • A malfunction that you cannot service has occurred. c Contact your Sony dealer or local authorized Sony service facility and inform them of the 5-digit code. (example: E:61:10)
Page 192: Warning Indicators And Messages
10 minutes remaining. % Moisture condensation has occurred* Fast flashing: •Eject the cassette, turn off your camcorder, and leave it for about one hour with the cassette compartment open (p. 202). Warning indicator as to cassette...
Page 193 (p. 138).* No “Memory Stick” is inserted.* You are trying to record an image with sound that cannot be recorded by your camcorder on the “Memory Stick” (p. 129).* No still image is recorded on the “Memory Stick”though you are trying to print in the 9PIC PRINT mode (p.
Page 194: Additional Information
Cassettes with cassette memory have the We recommend you to use cassette with cassette memory. IC memory is mounted on this type of cassette. Your camcorder can read and write data such as dates of recording or titles, etc. to this memory.
Page 195: Audio Mode
“COPY INHIBIT” appears on the screen or on the TV screen if you try to record such software. Your camcorder does not record copyright control signals on the tape when it records. Audio mode 12-bit mode: The original sound can be recorded in stereo 1, and the new sound in stereo 2 in 32 kHz.
Page 196 When affixing a label on the cassette Be sure to affix a label only at the locations illustrated below [a] to prevent a malfunction of your camcorder. After using the cassette Rewind the tape to the beginning, put the cassette in its case, and store it upright.
Page 197: About The "Infolithium" Battery Pack
Charging the battery pack • Be sure to charge the battery pack before you start using your camcorder. • We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50°F to 86°F) until FULL appears in the display window, indicating that the battery pack is fully charged.
Page 198: Battery Life
3. Remove the battery from the equipment and store it in a dry, cool place. •To use the battery pack up on your camcorder, leave your camcorder in the recording standby mode until the power goes off without a cassette inserted.
Page 199: About I.link
About the name “i.LINK” i.LINK is a more familiar term for IEEE 1394 data transport bus proposed by SONY, and is a trademark approved by many corporations. IEEE 1394 is an international standard standardized by the Institute of Electrical and...
Page 200 DV jacks, see page 76 and 91. This unit can also be connected to other i.LINK (DV) compatible equipment made by SONY (e.g. VAIO series personal computer) other than video equipment. Before connecting this unit to a personal computer, make sure that application software supported by this unit is already installed on the personal computer.
Page 201: Using Your Camcorder Abroad
Using your camcorder abroad Using your camcorder abroad You can use your camcorder in any country or area with the AC power adaptor supplied with your camcorder within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet [b].
Page 202: Maintenance Information And Precautions
If your camcorder is brought directly from a cold place to a warm place, moisture may condense inside your camcorder, on the surface of the tape, or on the lens. In this state, the tape may stick to the head drum and be damaged or your camcorder may not operate correctly.
Page 203 The videohead suffers from wear after long use. If you cannot obtain a clear image even after using a cleaning cassette, it might be because the videohead is worn. Please contact your Sony dealer or local authorized Sony service facility to have the videohead replaced.
Page 204 •Keep your camcorder away from strong magnetic fields or mechanical vibration. •Do not touch the LCD screen with your fingers or a sharp-pointed object. •If your camcorder is used in a cold place, a residual image may appear on the LCD screen. This is not a malfunction.
Page 205 Maintenance information and precautions AC power adaptor •Unplug the unit from the wall outlet when you are not using it for a long time. To disconnect the power cord, pull it out by the plug. Never pull the power cord itself. •Do not operate the unit with a damaged cord or if the unit has been dropped or damaged.
Page 206 •If you touch the liquid, wash it off with water. •If the liquid gets into your eyes, wash your eyes with a lot of water and then consult a doctor. If any problem occurs, unplug your camcorder and contact your nearest Sony dealer.
Page 207: Specifications
DCR-TRV16/TRV18: 2.5 W DCR-TRV25/TRV27: 3.4 W Operating temperature 0°C to 40°C (32°F to 104°F) Storage temperature –20°C to + 60°C (–4°F to + 140°F) Dimensions (Approx.) DCR-TRV 16/TRV18: 93 162 mm 3 3/4 in.) (w/h/d) DCR-TRV 25/TRV27: 93 163 mm 3 3/4 in.)
Page 208: Battery Pack
Specifications Mass (approx.) DCR-TRV16: 610 g (1 lb 5 oz) DCR-TRV18: 620 g (1 lb 5 oz) DCR-TRV25: 640 g (1 lb 6 oz) DCR-TRV27: 660 g (1 lb 7 oz) main unit only DCR-TRV16: 700 g (1 lb 8 oz) DCR-TRV18: 710 g (1 lb 9 oz) DCR-TRV25: 740 g (1 lb 10 oz) DCR-TRV27: 760 g (1 lb 10 oz)
Page 209: Quick Reference
Your camcorder is equipped with a Carl Zeiss lens which can reproduce fine images. The lens for your camcorder was developed jointly by Carl Zeiss, in Germany, and Sony Corporation. It adopts the MTF* measurement system for video camera and offers a quality as the Carl Zeiss lens.
Page 210 Identifying parts and controls 8 PHOTO button (p. 43) 9 Power zoom lever (p. 30) q; EDITSEARCH button (p. 37) qa Grip strap qs NIGHTSHOT switch (p. 34) Fastening the grip strap Fasten the grip strap firmly. qd SUPER NS/COLOR SLOW S button (p.
Page 211 Identifying parts and controls qj BATT release button (p. 16) qk SEL/PUSH EXEC dial (p. 23) ql START/STOP button (p. 26) w; DC IN jack cover Notes on the intelligent accessory shoe •The intelligent accessory shoe supplies power to optional accessories such as a video light, microphone or printer.* •The intelligent accessory shoe is linked to the POWER switch, allowing you to turn the power supplied by the shoe on and off.
Page 212 (USB) jack DV IN/OUT jack (p. 76) es i (headphones) jack (green) When you use headphones, the speaker on your camcorder is silent. ed MIC jack (PLUG IN POWER) (red) Connect an external microphone (optional). This jack also accepts a...
Page 213 N PLAY (playback) M FF (fastforward) X PAUSE (pause) * Except DCR-TRV16 Attaching the shoulder strap Attach the shoulder strap supplied with your camcorder to the hooks for the shoulder strap. PAUSE el Viewfinder lens adjustment lever (p. 29) r; MEMORY operation buttons* (p. 121)
Page 214 Identifying parts and controls rs ENDSEARCH button (p. 37) rd DISPLAY button (p. 39) rf VOLUME buttons (p. 38) rg REC (record) button (p. 89, 91, 93, 143) rh AUDIO DUB button (p. 96) rj PB ZOOM button (p. 67, 145) rk MENU button (p.
Page 215 Cassette compartment tg Lens cap (p. 26) th Tripod receptacle Make sure that the length of the tripod screw is less than 5.5 mm (7/32 inch). Otherwise, you cannot attach the tripod securely, and the screw may damage your camcorder.
Page 216: Remote Commander
•Your camcorder works in the Commander mode VTR 2. Commander modes 1, 2 and 3 are used to distinguish your camcorder from other Sony VCRs to avoid erroneous remote control operation. If you use another Sony VCR in the Commander mode VTR 2, we recommend changing the Commander mode or covering the sensor of the VCR with black paper.
Page 217: Back Light (P
Identifying parts and controls Operation indicators LCD screen and viewfinder 120min STBY STILL 16:9WIDE NEG. ART AUTO F2.0 1 Cassette memory (p. 13, 194) 2 Remaining battery time (p. 32) 3 Zoom (p. 30)/Exposure (p. 60)/Data file name* (p. 105) 4 Digital effect (p.
Page 218 Identifying parts and controls wf Audio mode (p. 182) wg Data file name* (p. 23) wh Video flash ready This indicator appears when you use the video flash light (optional). wj Continuous mode* wk Remaining battery time (p. 17) /Tape counter (p. 32)/Memory counter* /Time code (p.
Page 219: Index
Index A, B AC power adaptor ... 17 Adjusting viewfinder ... 29 Audio dubbing ... 94 AUDIO MIX ... 178 Audio mode ... 182 AUTO SHUTTER ... 176 BACK LIGHT ... 33 Battery pack ... 16 Beep ... 184 BOUNCE ... 51 BURST ...
Page 220 Printed on recycled paper. Printed using VOC (Volatile Organic Compound)-free vegetable oil based ink. Sony Corporation Printed in Japan...

This manual is also suitable for:

Dcr-trv16, dcr-trv18, dcr-trv25, dcr-trv27 Trv18 Trv25trv27 Handycam dcr-trv25 Handycam dcr-trv27 Handycam dcr-trv16 ... Show all

Sony DCR-TRV Operating Instructions Manual

Main Features

Quick Start Guide

Getting Started

Recording - Basics

Playback - Basics

Advanced Recording Operations

Advanced Playback Operations

Editing

?Memory Stick” Operations

Except DCR-TRV16

Table of Contents

Viewing Images Using Your Computer

Customizing Your Camcorder

Troubleshooting

Additional Information

Quick Reference

Quick Links

Operating Instructions

Related Manuals for Sony DCR-TRV

Summary of Contents for Sony DCR-TRV

This manual is also suitable for:

Table of Contents