hit counter script
Download Print this page
Cisco 3640 Series Manual
Hide thumbs Also See for 3640 Series:

Advertisement

Cisco 3640 Series Router-PBX Interoperability:
VIC 2BRI-NT/TE card to Alcatel 4400 PBX with
BRI ISDN QSIG Signaling
This document describes the interoperability and configuration of a Cisco 3640 series router with a VIC
2BRI-NT/TE card to an Alcatel 4400 PBX using BRI ISDN QSIG signaling. It includes the following
sections:

System Components

PBX Model
PBX Release
Telephony Signaling
Voice Gateway
Gateway Release
VoX Protocol

Configuration Tasks

See the following sections for configuration tasks for this feature:
System Components
Configuration Tasks
Caveats
Alcatel 4400
R3.2
BRI ISDN QSIG
Cisco 3640 series router
Cisco IOS Release 12.2(1a)
H.323
Set Up
Alcatel PBX Configuration
Cisco 3640 Series Router Configuration
Page 1

Advertisement

loading

Summary of Contents for Cisco 3640 Series

  • Page 1: System Components

    VIC 2BRI-NT/TE card to Alcatel 4400 PBX with BRI ISDN QSIG Signaling This document describes the interoperability and configuration of a Cisco 3640 series router with a VIC 2BRI-NT/TE card to an Alcatel 4400 PBX using BRI ISDN QSIG signaling. It includes the following sections: •...
  • Page 2 Cisco 3640 Series Router-PBX Interoperability: VIC 2BRI-NT/TE card to Alcatel 4400 PBX with BRI ISDN QSIG Signaling Set Up This section includes the following information: • Connectivity Diagrams • Set Up Notes Connectivity Diagrams Figure 1: Test Configuration Basic Call Setup End-to-End Configuration...
  • Page 3 Cisco 3640 Series Router-PBX Interoperability: VIC 2BRI-NT/TE card to Alcatel 4400 PBX with BRI ISDN QSIG Signaling Alcatel PBX Configuration Alcatel PBX Version Information • Software: Version R3.2 • Hardware: BRA2, 3BA23076. Version Information \compidea\Node Node Number (reserved) Software Version R3.2...
  • Page 4: Trunk Group

    Cisco 3640 Series Router-PBX Interoperability: VIC 2BRI-NT/TE card to Alcatel 4400 PBX with BRI ISDN QSIG Signaling Trunk Cards Were Configured the Same Interface type must be set to BRA2. \compidea\Shelf::0\Board::9 Board Address Interface Type BRA2 Usage State Active Operational State...
  • Page 5 Cisco 3640 Series Router-PBX Interoperability: VIC 2BRI-NT/TE card to Alcatel 4400 PBX with BRI ISDN QSIG Signaling Private Trunk Group False Security Patrol False Q931 signal variant ABC-F Number Compatible With Number Of Digits To Send Remote Network Shared Trunk Group False auto.DTMF dialing on outgoing call...
  • Page 6 Cisco 3640 Series Router-PBX Interoperability: VIC 2BRI-NT/TE card to Alcatel 4400 PBX with BRI ISDN QSIG Signaling Cisco 3640 Series Router Configuration The following is the configuration of the Cisco 3640 series router connected to the Alcatel 4400 ISDN BRI ISDN QSIG signaling interface.
  • Page 7 Cisco 3640 Series Router-PBX Interoperability: VIC 2BRI-NT/TE card to Alcatel 4400 PBX with BRI ISDN QSIG Signaling Port adapter insertion time unknown EEPROM contents at hardware discovery: Hardware revision 1.2 Board revision B0 Serial number 7687847 Part number 800-01171-04 Test history...
  • Page 8 Cisco 3640 Series Router-PBX Interoperability: VIC 2BRI-NT/TE card to Alcatel 4400 PBX with BRI ISDN QSIG Signaling Slot 3: 4 PORT Voice PM for MARs Port adapter Port adapter is analyzed Port adapter insertion time unknown EEPROM contents at hardware discovery: Hardware revision 1.1...
  • Page 9 Cisco 3640 Series Router-PBX Interoperability: VIC 2BRI-NT/TE card to Alcatel 4400 PBX with BRI ISDN QSIG Signaling ip subnet-zero no ip finger no ip domain-lookup ip host whiz 171.69.1.162 ip host dirt 171.69.1.129 ip host danube 171.69.17.14 no ip dhcp-client network-discovery...
  • Page 10 Cisco 3640 Series Router-PBX Interoperability: VIC 2BRI-NT/TE card to Alcatel 4400 PBX with BRI ISDN QSIG Signaling interface BRI3/1 no ip address isdn switch-type basic-net3 isdn T310 120000 ip kerberos source-interface any ip classless no ip http server dialer-list 1 protocol ip permit...