Advertisement
Available languages
Available languages
Quick Links
SPIRALIZER WITH PEEL, CORE AND SLICE
TIPS & TRICKS
1.
Be sure to select fresh, firm, and symmetrical produce for best results.
2.
Be sure to thoroughly wash your fruits and vegetables before processing.
3.
Square off ends of fruits and vegetables by cutting the ends off with a knife.
4.
When preparing to process more firm produce, press the Fruit and Vegetable
Skewer into the food before affixing it to the Spiralizer attachment. Ensure the
fruit and vegetable skewer is inserted into the center-most portion of the fruit or
vegetable.
5.
Rinse off blades quickly after use to remove residual produce for easier cleaning.
6.
If peeling stops, check the peeling blade for clogs. Unclog with water and start
again. Do not use your hands to free food material from the peeling blade.
7.
Peeling results are best when produce is fresh and in season.
8.
The peeling blade performs best with select fruits and vegetables 1.5 – 3.75
inches (3.81-9.53cm) in diameter, and no longer than 5.5 inches (13.97cm).
Peeling larger apples and potatoes will typically yield improved results over
smaller ones.
9.
If experiencing difficulty removing a spiralizing or spiral slicing blade, pull blade
towards the stand mixer, and then lift to remove from the carrier.
10. Fruits and vegetables that are soft in the center may not spiralize as well as more
firm fruits and vegetables.
11. This product is designed for use with many types of thin-skinned fruits and
vegetables, but is not designed for soft and/or high-pulp fruits and vegetables
such as tomatoes and citrus.
12. Clean properly after use as described in the
Use and Care Guide. We recommend using
a light mineral oil to lubricate the blade
carrier drive shaft. Add a drop of mineral
oil to the drive shaft at a location where the
blade carrier is engaged. This can be done
biannually or after 30 uses.
/
©2015 KitchenAid. All rights reserved. KP150184
®
TM
Advertisement
Related Manuals for KitchenAid KSM1APC
Summary of Contents for KitchenAid KSM1APC
- Page 1 Add a drop of mineral oil to the drive shaft at a location where the blade carrier is engaged. This can be done biannually or after 30 uses. ©2015 KitchenAid. All rights reserved. KP150184 ®...
- Page 2 Verser une goutte d’huile minérale sur l’arbre d’entraînement à un endroit où le support de lame est engagé. Cette opération peut être effectuée deux fois par an ou après 30 utilisations. ©2015 KitchenAid. Tous droits réservés. KP150184 ®...
- Page 3 Agregue una gota de aceite mineral al eje accionador donde se conecta el soporte de la cuchilla. Esto se puede hacer dos veces al año o después de 30 usos. ©2015 KitchenAid. Todos los derechos reservados. KP150184 ®...