PLACING ORIGINALS
I I I I Using
the
automatic
feeder
1
Open the document cover, make sure that
an original has not been left on the
document glass, and then gently close the
document cover.
2
Adjust the original guides to the size of the
originals.
Place the originals face down in the
3
document feeder tray.
line (maximum of 50 pages).
NOTE
Original size detection function
One of the four groups of standard original sizes shown below can be selected for detection by the original size
detection function. The factory default setting is "AB-1 (INCH-1)". The setting can be changed using
"ORIGINAL SIZE DETECTOR SETTING" in the key operator programs.
Group
1
INCH-1
2
INCH-2
3
AB-1
4
AB-2
document
Place the originals face
down.
Insert the originals all
the
way
into
the
document feeder. The
stack height must not be
higher than the indicator
Detectable original sizes
Document feeder tray (for automatic document feeder)
Document glass
11" x 17", 8-1/2" x 14", 8-1/2" x 11",
8-1/2" x 11"R, 5-1/2" x 8-1/2"
11" x 17", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 5-1/2" x 8-1/2"
A3, A4, A4R, A5,B4, B5, B5R
A3, A4, A4R, A5,B5, B5R, 216x330
I I I I Using the document glass
Open the document cover, place the
original face down on the document glass,
and then gently close the document cover.
Original size detector
NOTE
Do not place any objects under the original size
detector, because they may damage it or the original
size may not be detected properly.
Original scale
mark
A5 or
5½ x 8½
B4 or
8½x14
A4 or 8½x11
A3 or 11x17
GAlign the corner of the original with the tip of the
arrow mark
on the document glass scale.
GPlace the original in the appropriate position for its
size as shown above.
Document glass + A3, A4
Document glass + A3, A4
Document glass + 11" x 17", 8-1/2" x 11",
216x330
Document glass + 11" x 17", 8-1/2" x 11",
B4
To make a copy of a
small original such as a
postcard,
use
the
[PAPER SELECT] key
to select the desired
paper size.
Original scale
mark
A4R or 8½x11R
4-3
4