Sharp FO-5700 Operation Manual page 165
Hide thumbs
Also See for FO-5700:
- Operation manual (182 pages) ,
- Service manual (140 pages) ,
- Operation manual (183 pages)
Table of Contents
Advertisement
All manuals and user guides at all-guides.com
all-FO5650.book Page 161 Friday, November 26, 1999 11:05 AM
Dialling and transmission problems
Problem
Dialling is not possible.
The power is on, but no
transmission takes place.
Nothing is printed at the
receiving end.
A distorted image is
received at the other end.
Solution
• Make sure the power cord is properly plugged into
a power outlet.
• Make sure that the telephone line is properly
connected to both the TEL. LINE socket and the
wall socket.
• Make sure that the fax machine is set to the correct
dialling mode for your telephone line. See Option
Setting 22 in Chapter 6.
• Make sure that the receiving machine has paper.
• Make sure that the telephone line cord is plugged
into the TEL. LINE socket, and not the TEL. SET
socket.
• If the receiving machine is in manual mode with no
attendant, reception will not be possible.
• If the receiving machine is not a Sharp model,
make sure it is G3 compatible.
• Check the display for error messages.
• Press the SPEAKER key and check for a dial tone.
• Make sure that the document for transmission is
placed face down in the feeder.
• If ECM mode (Option Setting 9) is turned off, noise
on the telephone line may cause distortion. Try
sending the document again.
• Make a copy of the document on your fax machine.
If the copy is also distorted, your fax machine may
need service.
Problems and Solutions
161
Advertisement
Table of Contents
