Sony CMT-BT60 Operating Instructions
Personal audio system
Hide thumbs
Also See for CMT-BT60:
- Service manual (86 pages) ,
- Operating instructions (2 pages) ,
- Specifications (2 pages)
Advertisement
Quick Links
4-456-707-11 (1)
Personal Audio System
Operating Instructions
GB
©2013 Sony Corporation
Printed in China
CMT-BT60
other. A grounding type plug has two blades
and a third grounding prong.
The wide blade or the third prong are provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on
WARNING
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
To reduce the risk of fire or electric shock, do
11) Only use attachments/accessories specified by
not expose this apparatus to rain or moisture.
the manufacturer.
To reduce the risk of fire, do not cover the
12) Use only with the cart, stand, tripod,
ventilation opening of the appliance with
bracket, or table specified by the
newspapers, tablecloths, curtains, etc.
manufacturer, or sold with the
Do not expose the appliance to naked flame
apparatus.
sources (for example, lighted candles).
When a cart is used, use caution whenmoving
the cart/apparatus combination to avoid injury
To reduce the risk of fire or electric shock, do not
expose this appliance to dripping or splashing,
from tip-over.
and do not place objects filled with liquids, such
13) Unplug this apparatus during lightning storms
or when unused for long periods of time.
as vases, on the appliance.
14) Refer all servicing to qualified service
Do not install the appliance in a confined space,
personnel.
such as a bookcase or built-in cabinet.
Servicing is required when the apparatus has
As the main plug is used to disconnect the unit
been damaged in any way, such as power-
from the mains, connect the unit to an easily
supply cord or plug is damaged, liquid has
accessible AC outlet. Should you notice an
been spilled or objects have fallen into the
abnormality in the unit, disconnect the main plug
apparatus, the apparatus has been exposed to
from the AC outlet immediately.
rain or moisture, does not operate normally, or
These following indications are located on the
has been dropped.
bottom exterior.
The following FCC statement applies only
to the version of this model manufactured
for sale in the U.S.A. Other versions may
not comply with FCC technical regulations.
NOTE:
This symbol is intended to alert
This equipment has been tested and found to
the user to the presence of
comply with the limits for a Class B digital device,
uninsulated"dangerous voltage"
pursuantto Part 15 of the FCC Rules. These limits
within the product's enclosure that
are designed to provide reasonable protection
may be of sufficient magnitude to
against harmful interference in a residential
constitute a risk of electric shock to
installation. This equipment generates, uses
persons.
and can radiate radio frequency energy and, if
not installed and used in accordance with the
This symbol is intended to alert the
instructions, may cause harmful interference
user to the presence of important
to radio communications. However, there is no
operating and maintenance
guarantee that interference will not occur in a
(servicing) instructions in the
particular installation. If this equipment does
literature accompanying the
cause harmful interference to radio or television
appliance.
reception, which can be determined by turning
Do not expose batteries or appliances with
the equipment off and on, the user is encouraged
battery-installed to excessive heat, such as
to try to correct the interference by one or more of
sunshine and fire.
the following measures:
The unit is not disconnected from the mains as
Reorient or relocate the receiving antenna.
long as it is connected to the AC outlet, even if the
Increase the separation between the
unit itself has been turned off.
equipment and receiver.
The nameplate is located on the bottom exterior.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
CAUTION
is connected.
The use of optical instruments with this product
Consult the dealer or an experienced radio/TV
will increase eye hazard.
technician for help.
Owner's Record
CAUTION
The model and serial numbers are located on
You are cautioned that any changes or
the bottom exterior of the unit. Record these
modifications not expressly approved in this
numbers in the space provided below. Refer to
manual could void your authority to operate this
them whenever you call upon your Sony dealer
equipment.
regarding this product.
Model No.
This device complies with Part 15 of the FCC Rules.
Serial No.
Operation is subject to the following two
conditions: (1) this device may not cause harmful
Important Safety Instructions
interference, and (2) this device must accept any
1) Read these instructions.
interference received, including interference that
2) Keep these instructions.
may cause undesired operation.
3) Heed all warnings.
This equipment must not be co-located or
4) Follow all instructions.
operated in conjunction with any other antenna or
5) Do not use this apparatus near water.
transmitter.
6) Clean only with dry cloth.
This equipment complies with FCC radiation
7) Do not block any ventilation openings.
exposure limits set forth for an uncontrolled
Install in accordance with the manufacturer's
environment and meets the FCC radio frequency
instructions.
(RF) Exposure Guidelines in Supplement C to
8) Do not install near any heat sources such
OET65. This equipment has very low levels of
as radiators, heat registers, stoves, or other
RF energy that it deemed to comply without
apparatus (including amplifiers) that produce
maximum permissive exposure evaluation (MPE).
heat.
But it is desirable that it should be installed and
9) Do not defeat the safety purpose of the
operated keeping the radiator at least 20cm
polarized or grounding-type plug. A polarized
or more away from person's body (excluding
plug has two blades with one wider than the
extremities: hands, wrists, feet and ankles).
Location of Controls
Operation is subject to the following two
conditions:
(1) this device may not cause interference, and (2)
Unit (Top)
this device must accept any interference, including
interference that may cause undesired operation
of this device.
This equipment complies with IC radiation
exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment
has very low levels of RF energy that it deemed to
comply without maximum permissive exposure
evaluation (MPE). But it is desirable that it should
be installed and operated keeping the radiator
at least 20cm or more away from person's body
(excluding extremities:hands, wrists, feet and
ankles).
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency
(RF) Exposure Guidelines in Supplement C to
OET65.
This equipment has very low levels of RF energy
that it is deemed to comply without testing of
specific absorption ratio (SAR).
Note on DualDiscs
Remote
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side. However,
since the audio material side does not conform to
the Compact Disc (CD) standard, playback on this
product is not guaranteed.
Music discs encoded with copyright
protection technologies
This product is designed to playback discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware
that among those discs, there are some that do
not conform to the CD standard and may not be
playable by this product.
License and Trademark Notice
ˎWindows Media is either a registered trademark
or trademark of Microsoft Corporation in the
United States and/or other countries.
ˎMPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
This manual mainly explains operations using
the remote, but the same operations can also be
Thomson.
performed using the buttons on the unit having
ˎThe BLUETOOTH® word mark and logos are
the same or similar names.
owned by the BLUETOOTH SIG, Inc. and any
use of such marks by Sony Corporation is under
license.
ˎThe N Mark is a trademark or registered
Getting Started
trademark of NFC Forum, Inc. in the United States
and in other countries.
ˎAndroid is a trademark of Google Inc.
ˎThis product is protected by certain intellectual
property rights of Microsoft Corporation. Use or
distribution of such technology outside of this
product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
ˎThe system names and product names indicated
in this manual are generally the trademarks or
registered trademarks of the manufacturer. ™
and ® marks are omitted in this manual.
Antennas
FM lead antenna (supplied)
AM loop antenna (supplied)
Find a location and an orientation that provide
good reception, and then fix the antennas to a
stable surface (window, wall, etc.).
Keep the antennas away from the unit, power
cord and other AV components to avoid picking
noise.
Secure the end of the FM lead antenna with
adhesive tape.
Power input (AC IN)
After all equipments are connected, connect the
power cord to the wall outlet.
USB port
Connect a USB device to the USB port using a USB
cable (not supplied).
AUDIO IN (external input) jack
Connect optional external equipment with an
audio connecting cable (not supplied).
To prepare the AM loop antenna
Rewind an
Stand the
antenna cord
antenna and
wound around
secure it to the
the antenna
slit until it clicks.
and raise the
antenna stand.
Operations
Playing a CD-DA/MP3 disc
1
Press CD FUNCTION on the remote or press
FUNCTION on the unit repeatedly until "CD"
appears in the display .
2
Insert a disc in the disc slot with the label side
facing forward.
Insert a disc with
the label side facing
forward.
Eject a disc.
Playback starts automatically after "READING"
disappears.
If you change from another function to the CD
function while a disc is already inserted in the
To use the remote
disc slot, press to start playback.
Slide and remove the battery compartment lid,
Notes
and insert the two supplied R6 (size AA) batteries,
ˎ8 cm discs cannot be used with this system.
side first, matching the polarities shown below.
ˎDo not insert an 8 cm disc with an adapter. Doing so may
cause the system to malfunction.
ˎYou cannot insert a disc into the disc slot when "NO DISC"
does not appear in the display.
ˎIf you cannot insert the disc into the disc slot even when
"NO DISC" appears in the display, there may already be a
disc in the slot. Press and hold down
to eject such a
disc forcibly. If even the system does not then eject the disc,
contact your nearest Sony dealer.
ˎIf you cannot eject the disc and "LOCKED" appears in the
display, contact your nearest Sony dealer.
Notes on using the remote
ˎDo not insert a disc with non-standard shapes (e.g., heart,
ˎWith normal use, the batteries should last for about 6
square, star). The disc may fall into the system and cause
months.
irreparable damage.
ˎDo not mix an old battery with a new one or mix different
ˎDo not turn off the system with a disc halfway inserted in
types of batteries.
the disc slot. Doing so may cause the disc to fall.
ˎIf you do not use the remote for a long period of time,
ˎDo not use a disc with tape, seals or paste on it as this may
remove the batteries to avoid damage from battery leakage
cause malfunction.
and corrosion.
ˎWhen you eject a disc, handle the disc by its edge. Do not
touch the surface.
Other operations
To
Do the following:
Pause playback
Press
. To resume play,
press the button again.
Stop playback
Press
.
Select a track
Press /
.
or file
Find a point in a
Hold down /
(or
track or file
/
on the unit)
during playback, and release
the button at the desired point.
Select Repeat
Press REPEAT
repeatedly
Play
until " " (all tracks of files)
or "
1" (single track or file)
appears.
Select a folder on
Press
+/
repeatedly.
an MP3 disc
Eject a disc
Press
on the unit.
To change the play mode
Press PLAY MODE
repeatedly while the player
is stopped. You can select Normal Play mode (no
indication or "FLDR"* appears), Shuffle Play mode
("SHUF" or "FLDR SHUF"* appears), or Program
Setting the clock
Play mode ("PGM" appears).
1
Press
to turn on the system.
Play mode
2
Press TIMER MENU
to select the clock set
mode.
If "PLAY SET" flashes, press /
repeatedly
to select "CLOCK," and then press
(enter)
.
* When "FLDR" or "FLDR SHUF" appears, all the files in the
3
Press /
selected folder on the MP3 disc will be played. When
repeatedly to set the hour, then
playing a CD-DA disc, the system performs the same
press
(enter)
.
operation as Normal Play (no indication) or Shuffle Play
4
"SHUF."
Use the same procedure to set the minutes.
Note
When "PUSH STOP" appears
The clock settings are reset when you disconnect the power
You cannot change the play mode during
cord or if a power failure occurs.
playback. Stop playback then change the play
To display the clock when the system is off
mode.
Press DISPLAY
repeatedly to display the clock.
Note on the play mode
The clock is displayed for about 8 seconds.
If the power cord is disconnected when the
If the system is in BLUETOOTH Standby mode, the
clock does not appear by pressing DISPLAY .
system is on, the play mode returns to Normal
Play.
Notes on Repeat Play
ˎ"
" indicates that all tracks or files will be repeated until
you stop playback.
ˎ"
1" indicates that a single track or file will be repeated
until you stop playback.
ˎIf the power cord is disconnected when the system is on,
Repeat Play is cancelled.
Notes on Shuffle Play mode
ˎWhen Shuffle Play mode is set to "SHUF," the system
shuffle-plays all tracks or files on the disc. When Shuffle
Play mode is set to "FLDR SHUF," the system shuffle-plays all
tracks or files in selected folder.
ˎWhen you turn off the system, the selected Shuffle Play
mode ("SHUF" or "FLDR SHUF") is cleared and the play mode
returns to Normal or FLDR Play mode.
Notes on playing MP3 discs
ˎDo not save unnecessary folders or files on a disc that has
MP3 files.
ˎFolders that have no MP3 files are not recognized on the
system.
ˎThe system can only play MP3 files that have a file extension
of ".mp3."
ˎEven when file name has the ".mp3" file extension, if it is
not an audio MP3 file, playing this file may generate a loud
noise, which could cause damage of the system.
ˎThe maximum number of MP3 folders and files compatible
Presetting radio stations
with this system is:
999* folders (including the root folder)
999 files
1
Tune in the desired station.
250 files in a single folder
8 folder levels (in the tree structure of files)
2
Press TUNER MEMORY
.
ˎCompatibility with all MP3 encoding/writing software, CD-R/
Preset number
RW drive and recording device, and recording media cannot
be guaranteed. Incompatible MP3 discs may produce noise
or interrupted audio or may not play at all.
* This include folders that have no MP3 or other files. The
number of folders that the system can recognize may
be less than actual number of folders, depending on the
3
Press TUNE +/
repeatedly to select a
folder structure.
preset number.
If another station is already assigned to the
selected preset number, the station is replaced
Creating your own program
by the new station.
(Program Play)
4
Press
to register the station.
"COMPLETE" appears in the display .
1
Press CD FUNCTION
on the remote or press
5
Repeat steps 1 through 4 to register other
FUNCTION
on the unit repeatedly until "CD"
stations.
appears in the display .
You can preset up to 20 FM, 10 AM stations.
2
Press PLAY MODE
repeatedly until "PGM"
appears while the player is stopped.
To tune in to a preset radio station
3
Select a folder (MP3 disc only).
Press TUNING MODE
repeatedly until "PRESET"
Press
+/
repeatedly to select the
appears in the display , and then press TUNE
desired folder.
+/
to select the preset number to which the
If you want to program all files in the folder,
desired station is registered.
press
.
4
Select the desired track or file number.
Press /
Playing a file on a USB device
repeatedly until the desired
track or file number appears.
You can play audio files stored on a USB device by
connecting a USB memory or USB device to the
system. The playable audio format is MP3/WMA*/
AAC*.
Selected track
Total playing time
Check the websites below for the information
or file number
of the selected
track or file
about compatible USB devices.
For customers in the United States:
http://esupport.sony.com/
5
Press
.
For customers in Canada
"--.--" appears when the total playing time
http://esupport.sony.com/CA/
exceeds 100 minutes for an CD-DA or when you
* Files with DRM (Digital Rights Management) copyright
program an MP3 files.
protection or files downloaded from an online music store
6
Repeat steps 3 through 5 to program
cannot be played on this system. If you try to play one of
additional tracks or files, up to a total of 25
these files, the system plays the next unprotected audio
file.
tracks or files.
1
Press USB FUNCTION
on the remote or
7
Press
.
press FUNCTION
on the unit repeatedly
Your program of tracks or files starts playback.
until "USB" appears in the display .
The program remains available until you
2
Connect the USB device directly or via the USB
remove the disc from the disc slot
or unplug
cable supplied with the USB device to the USB
the power cord.
port
on the unit.
To play the same program again, press
.
3
Press to start playback.
To cancel Program Play
Other operations
Press PLAY MODE
repeatedly until "PGM"
disappears while the player is stopped.
To
Do the following:
Pause playback
Press . To resume play,
To delete the last track or file of the
press the button again.
program
Stop playback
Press
. To resume play,
Press CLEAR
while the player is stopped.
press
*1
. To cancel
resume play, press
Notes
again
.
ˎIf the disc is ejected after programming, all the programmed
*2
tracks or files are deleted.
Select a folder
Press
+/
repeatedly.
ˎIf the power cord is disconnected when the system is on,
the programmed tracks or files are deleted.
Select a file
Press /
.
Find a point in
Hold down /
a file
(/
on the unit)
Listening to the radio
during playback, and release
the button at the desired point.
Select Repeat
Press REPEAT
repeatedly
Tuning in a radio station
Play
until " " (all audio files) or
1
Press TUNER FUNCTION
on the remote or
"
1" (single audio file) appears
press FUNCTION
on the unit repeatedly
until "FM" or "AM" appears in the display.
*1
When playing a VBR MP3/WMA file, the system may
resume playback from a different point.
2
Perform tuning.
*2
Resume play returns to the number of folders.
For automatic scanning
To change the play mode
Press TUNING MODE
repeatedly until "AUTO"
Press PLAY MODE
repeatedly while the player
appears, and then press TUNE +/
. Scanning
is stopped. You can select Normal Play mode (no
stops automatically when a station is tuned in,
indication or "FLDR" appears
), or Shuffle Play
*1
and "ST" (for stereo programs only) appears in the
mode ("SHUF" or "FLDR SHUF" appears
*2
).
display .
*1
When no indication is selected, the system plays all files on
the USB device. When "FLDR" is selected, the system plays
all files in the selected folder on the USB device.
*2
When "SHUF" is selected, the system shuffle-plays all audio
If the scanning does not stop, press
to stop
files on the USB device. When "FLDR SHUF" is selected, the
scanning, then perform manual tuning (below).
system shuffle-plays all audio files in the selected folder.
For manual tuning
Note on the play mode
Press TUNING MODE
repeatedly until
If the power cord is disconnected when the
"MANUAL" appears, and then press TUNE +/
system is on, the play mode returns to Normal
repeatedly to tune in the desired station.
Play.
Tip
Notes on Repeat Play
To reduce static noise on a weak FM stereo station, press FM
ˎ"
" indicates that all files will be repeated until you stop
MODE repeatedly until "MONO" appears to turn off stereo
playback.
reception.
ˎ"
1" indicates that a single file will be repeated until you
stop playback.
To change the AM tuning interval
ˎIf the power cord is disconnected when the system is on,
Repeat Play is cancelled.
The default setting for AM tuning interval is 9 kHz
(or 10 kHz for some areas). Use the buttons on the
Note on Shuffle Play mode
unit to perform this operation.
When you turn off the system, the selected Shuffle Play
1
Press TUNER FUNCTION
on the remote or
mode ("SHUF" or "FLDR SHUF") is cleared and the play mode
returns to Normal Play mode (no indication or "FLDR").
press FUNCTION
on the unit repeatedly to
select the AM station.
Notes
ˎThe playback order for the system may differ from the
2
Press
/
to turn off the system.
playback order of the connected digital music player.
3
Press and hold FUNCTION
and press
/
ˎBe sure to turn off the system before removing the USB
device. Removing the USB device while the system is turned
on the unit.
on may corrupt the data on the USB device.
"STEP 9K" or "STEP 10K" appears in the display.
ˎWhen USB cable connection is necessary, connect the USB
When you change the interval, all the AM
cable supplied with the USB device to be connected. For
details on connection, refer to the operation manual of the
preset stations are erased.
USB device.
ˎIt may take time before "READING" appears after
connecting, depending on the type of USB device
connected.
ˎDo not connect the USB device through a USB hub.
ˎWhen the USB device is connected, the system reads all the
files on the USB device. If there are many folders or files on
2
Press BLUETOOTH FUNCTION
or press
the USB device, it may take a long time to finish reading the
FUNCTION
on the unit repeatedly until "BT
USB device.
AUDIO" appears in the display
.
ˎWith some connected USB devices, it may take a long time
ˎ The BLUETOOTH indicator
flashes slowly
to transmit signals from the system or to finish reading the
USB device.
in blue.
ˎCompatibility with all encoding/writing software cannot be
ˎ If the system has been automatically
guaranteed. If audio files on the USB device were originally
connected with the BLUETOOTH device in
encoded with incompatible software, those files may
produce noise or may malfunction.
the past, press BLUETOOTH
on the unit
ˎThe maximum number of folders and files on the USB
to cancel the connection so that "BT AUDIO"
device compatible with this system is:
appears in the display
.
1000* folders (including the root folder)
3
Press and hold BLUETOOTH
on the unit for
3000 files
2 seconds or longer.
250 files in a single folder
8 folder levels (in the tree structure of files)
The BLUETOOTH indicator
flashes quickly in
* This includes folders that have no playable audio file and
blue and "PAIRING" flashes in the display
.
empty folders. The number of folders that the system
The system is in Pairing mode.
can recognize may be less than actual number of folders,
depending on the folder structure.
4
Perform the pairing operation on the
ˎThe system does not necessarily support all the functions
BLUETOOTH device and search for this system
provided in a connected USB device.
with the BLUETOOTH device.
ˎFolders that have no audio files are not recognized.
When searching has finished, a list of the
ˎThe audio formats that you can listen to with this system are
as follows:
devices found may appear on the BLUETOOTH
MP3: file extension ".mp3"
device display.
WMA: file extension ".wma"
ˎ This system appears as "SONY:CMT-BT60." If it
AAC: file extension ".m4a," "mp4" or ".3gp"
does not appear, perform the procedure from
Note that even when file name has the correct file
step 1 again.
extension, if the actual file differs, the system may produce
ˎ When establishing connection with this
noise or may malfunction.
system, select the audio profile (A2DP, AVRCP)
on the BLUETOOTH device.
ˎ If the BLUETOOTH device does not support
Charging a USB device or iPod/
AVRCP (Audio Video Remote Control Profile),
you cannot perform playback or other
iPhone/iPad
operations with the system.
ˎ For details on operations of the BLUETOOTH
If you connect a USB device or iPod/iPhone/iPad
to the USB port when the system is turned on,
device to be connected, refer to the operation
manual supplied with your BLUETOOTH
charging begins automatically.
device.
To stop charging the USB device
5
Select "SONY:CMT-BT60" in the display of the
BLUETOOTH device.
Press
/
to turn off the system, and then
disconnect the USB cable.
If prompted to enter a passkey on the
BLUETOOTH device, enter "0000."
Note
6
You cannot charge the USB device or iPod/iPhone/iPad when
Operate the BLUETOOTH device and perform
the system is off. Some USB devices and iPod/iPhone may
BLUETOOTH connection.
not be charged owing to their characteristics.
When pairing is completed and connection
with the BLUETOOTH device is established
correctly, the display
changes to "BT AUDIO"
Using the BLUETOOTH function
from "PAIRING" and the BLUETOOTH indicator
flashes slowly in blue.
You can listen to music from your "WALKMAN" or
ˎ Depending on the type of BLUETOOTH device,
BLUETOOTH device over a wireless connection.
connection may start automatically after
pairing is completed.
Notes
ˎ"Passkey" may be called "Passcode," "PIN code," "PIN
number" or "Password," etc., depending on the device.
ˎThe pairing standby status of the system is cancelled after
about 5 minutes. If pairing is not successful, perform the
procedure from step 1.
ˎIf you want to pair with several BLUETOOTH devices,
perform the procedure from step 1 to 6 individually for each
BLUETOOTH device.
Tip
You can perform a pairing operation or attempt to make a
BLUETOOTH device
BLUETOOTH connection with another BLUETOOTH device
such as a "WALKMAN"
while the BLUETOOTH connection is established with one
BLUETOOTH device. The currently established BLUETOOTH
This system supports the BLUETOOTH A2DP and
connection is cancelled when BLUETOOTH connection with
another device is successfully established.
AVRCP profiles. For details on BLUETOOTH wireless
technology, see "BLUETOOTH wireless technology."
To erase the pairing registration
information
About the BLUETOOTH indicator
The BLUETOOTH indicator
allows checking of
1
Press BLUETOOTH FUNCTION
on the remote
the BLUETOOTH status.
or press FUNCTION
on the unit repeatedly
until "BT AUDIO" appears in the display
.
System status
Indicator status
When the system is connected with a
The system is in
Flashes slowly in blue.
BLUETOOTH device, the device name set for the
BLUETOOTH Standby
connected BLUETOOTH device appears in the
(when the system is on).
display
of the system. Press BLUETOOTH
During BLUETOOTH
Flashes quickly in blue.
on the unit to cancel the connection with that
pairing
BLUETOOTH device then display "BT AUDIO."
The system is
Flashes in blue.
2
Press OPTIONS
to display the setting menu.
attempting to connect
3
Press
/
repeatedly to select "DEL LINK,"
with a BLUETOOTH
then press
.
device.
4
Press
/
repeatedly to select "OK," then
The system has
Lit in blue.
press
.
established in
connection with a
"COMPLETE" appears and all the pairing
BLUETOOTH device.
information is erased.
Note
Enabling reception of AAC codec
If you have erased the pairing information, you cannot make
a BLUETOOTH connection unless pairing is performed again.
You can receive data in AAC codec format from a
To connect with a BLUETOOTH device again, you must enter
BLUETOOTH device. To enable reception, set up
the passkey on the BLUETOOTH device.
using the option menu.
Connecting by one-touch action (NFC)
1
Press OPTIONS
to display the setting menu.
NFC enables data communication by just touching
2
Press
/
repeatedly to select "BT AAC,"
your device to a specified location.
then press
.
Compatible smartphones are those equipped with
3
Press
/
repeatedly to select "ON" or
the NFC function (compatible operating system:
"OFF," then press
.
Android version 2.3.3 or later with the exception of
ON: to receive in AAC codec format
Android 3.x).
Check the website below for information on
OFF: to receive in SBC codec format
compatible devices.
Notes
For customers in the United States:
ˎIf you initiate setup during BLUETOOTH connection, the
http://esupport.sony.com/
connection is cut.
For customers in Canada
ˎIf sound is interrupted during reception in AAC codec
http://esupport.sony.com/CA/
format, set the BT AAC menu to "OFF."
Preparation on your smartphone (Android)
Pairing this system with a BLUETOOTH
An NFC-compliant application must be installed
device
on your smartphone. If not installed, you can
Pairing is an operation where BLUETOOTH devices
download "NFC Easy Connect" from Google Play.
register with each other beforehand. Use the
ˎ In some countries and regions, NFC-compliant
procedure below to pair the system with your
application may not be downloaded.
BLUETOOTH device. Once a pairing operation
ˎ For some smartphones, this function may
is performed, it does not have to be performed
be available without downloading "NFC Easy
again. If pairing is already completed, proceed
Connect." In this case, the operation and
to "Listening to music through a BLUETOOTH
specifications of the smartphone may be
connection."
different from the description in this manual.
1
Place the BLUETOOTH device to be connected
1
Access the website below to install the
within 1 meter from the system.
application.
Advertisement
Related Manuals for Sony CMT-BT60
Summary of Contents for Sony CMT-BT60
- Page 1 (RF) Exposure Guidelines in Supplement C to Eject a disc. WMA: file extension “.wma” ˎ This system appears as “SONY:CMT-BT60.” If it appears while the player is stopped. OET65. To tune in to a preset radio station ...
- Page 2 Standby power consumption: 0.5 W to 20), and if you change the frequency of the radio station ˎSony cannot be held liable in any way for damages or other CD player, and cause the system to malfunction. file on a USB device.”...