Table of Contents
Advertisement
2. Place the machine head on the table, adjust its position in
forward and backward directions by aligning it with the hole
for the presser foot lifter chain (4), and in sidewise directions
by aligning it with the belt hole (5).
4249B
3. Install the two mounting plates (6) to the machine bed (1)
and the pulley cover base (2) with the two set screws (7).
4. Secure the two collars (8), the four rubber cushions (9) and
the two washers (10) to the table with the two screws (11) as
shown in the illustration.
4250B
5. Connect the presser foot lifter chain (4) to the knee lifter lever
(12) and the foot lifter pedal (13).
4251B
DA-927A, DA-928A
4. INSTALLATION
6
Hide quick links:
Advertisement
Table of Contents
