Page 1
* Highest addressable resolution 1280 x 768 at 60 Hz * Addressable means the LCD TV will sync up to this mode. However, Dell does not guarantee the image will be sized, shaped and centered correctly. PC Display Modes Display Mode...
Page 2
VESA, 640 x 480 37.500 75.000 31.5 VESA, 800 x 600 37.879 60.317 40.0 VESA, 800 x 600 46.875 75.000 49.5 VESA, 1024 x 768 48.363 60.004 65.0 VESA, 1024 x 768 60.023 75.029 78.8 VESA, 1280 x 768 47.776 59.870 79.5 VESA, 1280 x 768...
Interval between time datum (0 H ) and back edge of line- 10.5µs 9.2 to 10.3 µs blanking pulse Front porch 1.5±0.3µs 1.27 to 2.22µs Synchronizing pulse 4.7±0.2µs 4.7±0.1µs Build-up time of the line blacking pulse 0.3±0.1µs =/< 0.48µs Build-up time of the line synchronizing pulse 0.2±0.1µs =/<...
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor. NERGY TAR ® is a U.S. registered mark. As an NERGY TAR ® Partner, DELL has determined that this product meets the TAR ® guidelines for energy efficiency. NERGY...
NOTE: This LCD TV automatically returns to normal operation when horizontal and vertical sync return, which occurs when you move the computer's mouse or press a key on the keyboard. Pin Assignments 15-pin D-Sub connector: Pin Number LCD TV Side of the 15-Pin Side Signal Cable Green Blue...
Note: Pin 1 is at the top right. Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment T.M.D.S. Data 2- T.M.D.S. Data 1- 17 T.M.D.S. Data 0- T.M.D.S. Data 2+ 10 T.M.D.S. Data 1+ 18 T.M.D.S. Data 0+ T.M.D.S. Data 2 Shield 11 T.M.D.S. Data 1 Shield 19 T.M.D.S. Data 0 Shield No Pin 12 No Pin 20 No Pin...
Height-Adjustable Stand (HAS): Dell™ W2300 LCD TV User's Guide Attaching HAS • Cable Management • Tilt_Swivel • Vertical Adjustment • Removing HAS Attaching HAS Lay LCD TV on a flat, soft, and clean surface or use the foam cushion shipped with your LCD TV. Attach stand to LCD TV by aligning tabs on stand to the LCD TV.
Vertical Adjustment Press the Lock Down button at the bottom of the HAS to make any vertical adjustment. HAS travels vertically. Removing HAS Lay LCD TV on a flat, soft, and clean surface or use the foam cushion shipped with your LCD TV. Press the release button, and pull up the base.
. A. Connection through blue VGA & lime green audio cable 1. Connect one end of the blue VGA cable to the VGA plug on W2300, and connect the other end to the VGA plug on your PC. 2. Connect one end of the lime green audio cable to the audio jack by the D-sub plug on W2300, and connect the other end to the Audio jack on your PC.
Page 10
Connecting as a TV Cable TV • Antenna • TV to VCR Cable TV 1. If your Cable TV signal is a single, round cable (75 ohm), then you're ready to connect to the TV. Connect the TV cable to the ANTENNA/CABLE plug on the TV. 2.
Page 11
1. If your antenna has a round cable (75 ohm) on the end, then you're ready to connect it to the TV. If your antenna has flat, twin-lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 -to 75- ohm adapter.
Page 12
1. Connect your antenna or Cable TV signal to the IN FROM ANT (enna) plug on the VCR. 2. Connect the OUT TO TV plug on the VCR to the 75 ohm plug on the TV (connecting cable supplied with the VCR). 3.
Page 13
Connecting A/V Outputs 1. The Composite output jacks on W2300 back cover provides the function to record your favorite program through broadcast or cable TV. 2. Connect devices (VCR, Camcorder...) with cables provided. Select TV input from OSD Menu.
NERGY TAR ®-compliant. As an NERGY TAR ® Partner, Dell Computer Corporation has determined that this product meets the TAR ® guidelines for energy efficiency. NERGY Federal Communications Commission (FCC) Notice (U.S. Only) Caution: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.