hit counter script
Cisco T1 Configuration Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Control Unit
  5. T1
  6. Configuration manual

Cisco T1 Configuration Manual

48-port cem interface module
Hide thumbs Also See for T1:
Table of Contents

Advertisement

Quick Links

Download this manual
48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS
XE Fuji 16.7.x (Cisco NCS 4200 Series)
First Published: 2017-11-22
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Advertisement

Table of Contents
loading

Related Manuals for Cisco T1

Summary of Contents for Cisco T1

  • Page 1 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series) First Published: 2017-11-22 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883...
  • Page 2 © 2017 Cisco Systems, Inc. All rights reserved.

  • Page 3: Table Of Contents

    Configuring BERT for CESoPSN Verifying BERT Configuration for CESoPSN Loopback on T1/E1 Interfaces Configuring Loopback Associated Commands Additional References for Configuring 48-Port T1/E1 CEM Interface Module 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
  • Page 4 Configuring Adaptive Clock Recovery of T1/E1 Interfaces for SAToP Configuring DCR for T1/E1 Configuring Differential Clock Recovery of T1/E1 Interfaces for SAToP Configuring Network Clock Verifying Network Clocking Configuration 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
  • Page 5 Configuring DCR for T1/E1 Configuring Differential Clock Recovery of T1/E1 Interfaces for SAToP Configuring Network Clock Verifying Network Clocking Configuration Associated Commands Additional References for Clock Recovery 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
  • Page 6 Contents 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 7: Configuring T1/E1 Interfaces On 48-Port T1/E1 Interface Module

    The following sections provide information about T1/E1 interfaces. Overview of T1/E1 Interfaces The 48-Port T1/E1 interface module on CEM line card supports generic single or dual-port T1/E1 trunk interfaces for voice, data, and integrated voice or data applications. Restrictions for Configuring T1/E1 Interfaces •...

  • Page 8: How To Configure T1/E1 Interfaces

    To configure E1 interface, use the following commands: enable configure terminal controller e1 0/3/0 clock source internal framing crc4 linecode hdb3 no shut exit 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 9: Verifying The Controller Configuration

    Controller state: up, T1/E1 state: up Idle Pattern: 0xFF, Idle CAS: 0x8 Dejitter: 5 (In use: 0) Payload Size: 192 Framing: Unframed CEM Defects Set None 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 10: Performance Monitoring

    0 Near-end path failures, 0 Far-end path failures, 0 SEF/AIS Secs Circuit Emulation Service over Packet-Switched Network CESoPSN is a method for encapsulating structured (NxDS0) TDM signals as pseudowires over packet switching networks. 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 11: Restrictions For Cesopsn On T1 Interface

    Soaking time: 3, Clearance time: 10 AIS State:Clear LOS State:Clear LOF State:Clear Framing is ESF, Line Code is B8ZS, Clock Source is Line. 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 12: Verifying Cem For Cesopsn On T1 Interface

    0, seq error 0, send 0 Router#show cem circuit int cem 0/4/32 CEM0/4/32, ID: 0, Line: UP, Admin: UP, Ckt: ACTIVE 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 13: Troubleshooting T1/E1 Controllers

    You can use the following methods to troubleshoot the T1/E1 controllers: Running Bit Error Rate Testing for SAToP Bit error rate testing (BERT) is supported on T1/E1 interfaces. You can run BERTs on 16 controllers out of 48 T1/E1 controllers at a time.

  • Page 14: Configuring Bert For Satop

    Verifying BERT Configuration for SAToP Use the following command to verify the BERT configuration for T1/E1 interfaces: Router# show controllers t1/e1 0/1/1 T1/E1 0/1/1 is up. 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 15: Bit Error Rate Testing For Cesopsn

    • For the line side BERT to be configured at timeslot level, the first CEM should be configured and it should be present at the same timeslot level where the BERT is configured. 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 16: Configuring Bert For Cesopsn

    Configuring BERT for CESoPSN Before You Begin Before you run BERT test, you must configure card type and controller. To run a BERT on T1/E1 interface for CESoPSN, perform the following tasks in global configuration mode. enable configure terminal controller t1/e1 0/1/1...

  • Page 17: Loopback On T1/E1 Interfaces

    Loopback Local Payload support is Note available only when framing is ESF. 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 18: Configuring Loopback

    Configuring Loopback Before You Begin Before you configure loopback, you must configure the controller and the CEM. To set a loopback local on the T1 interface, perform the following tasks in global configuration mode: enable configure terminal controller t1 0/0/1...

  • Page 19: Associated Commands

    48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 20: Additional References For Configuring 48-Port T1/E1 Cem Interface Module

    To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: http://www.cisco.com/go/mibs 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
  • Page 21 Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
  • Page 22 Configuring T1/E1 Interfaces on 48-Port T1/E1 Interface Module Additional References for Configuring 48-Port T1/E1 CEM Interface Module 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 23: Configuring Pseudowire

    Cisco Pseudowire Emulation Edge-to-Edge (PWE3) allows you to transport traffic by using traditional services such as T1/E1 over a packet-based backhaul technology such as MPLS or IP. A pseudowire (PW) consists of a connection between two provider edge (PE) chassis that connects two attachment circuits (ACs), such as T1/E1 or T3 /E3 links.

  • Page 24: Overview Of Pseudowire

    The protocol used for emulation of these services does not depend on the method in which attachment circuits are delivered to the Provider Edge (PE) chassis. For example, a T1 attachment circuit is treated the same way for all delivery methods, including copper, multiplex in a T3 circuit, a virtual tributary of a SONET circuit, or unstructured Circuit Emulation Service (CES).
  • Page 25 L = 8*N*D. The default payload size is selected in such a way that the packetization delay is always 1 millisecond. For example, a structured CEM channel of 16xDS0 has a default payload size of 128 bytes. 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
  • Page 26 ACTIVE --/-- CEM0/1/0 ACTIVE --/-- • show cem circuit cem-id — Displays the detailed information about that particular circuit. Router# show cem circuit 0 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 27: Circuit Emulation Service Over Packet-Switched Network

    The following section describes how to configure a CEM group for CESoPSN. To configure xconnect over MPLS, use the following commands: enable configure terminal control t1 0/4/32 cem-group 0 timeslots 1-10 Configure xconnect: 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
  • Page 28 Local interface: CE0/4/32 up, line protocol up, CESoPSN Basic 0 up Destination address: 2.2.2.2, VC ID: 10, VC status: up Output interface: Te0/0/0, imposed label stack {650} Preferred path: not configured 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
  • Page 29 Unavailable Sec: 0 Failure Counts: Pkts Malformed: JitterBuf Overrun: Generated Lbits: 0 Received Lbits: Generated Rbits: 0 Received Rbits: Generated Mbits: 0 Received Mbits: 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 30: Associated Commands

    Segment 1: CEM0/5/0 SATOP T1 0 up Segment 2: CEM0/5/3 SATOP T1 0 up Associated Commands The following commands are used to configure pseudowire: Commands cem-group http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ interface/command/ir-cr-book/ ir-c1.html#wp2440628600 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 31: Additional References For Configuring Pseudowire

    To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: http://www.cisco.com/go/mibs 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
  • Page 32 Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 33: Alarm History Restrictions

    • When RSP switchover happens, the alarm history files are not copied to the new active RSP. Two new files are created in the new active RSP. • When you re-configure alarm history or alarm persistence feature, two new files are created. 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 34: Configuring Alarm History

    *07:50:19.360 UTC Wed Jun 15 2016|SLOT_0 |BAY_3 |PORT_0 |2 |1 |7 |1 |SONET_SDH_PATH_VT/TU_ALARM|MAJOR|VT_PATH_LOP|RAISED *07:50:19.360 UTC Wed Jun 15 2016|SLOT_0 |BAY_3 |PORT_0 |2 |1 |7 |2 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 35: Associated Commands

    Related Topic Document Title Cisco IOS commands Cisco IOS Master Commands List, All Releases Standards Standards Title — There are no standards for this feature. 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
  • Page 36 Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 37: Finding Feature Information

    Circuit Emulation (CEM). Effective Cisco IOS XE Everest 16.5.1, ACR is supported on the 8-port T1/E1 interface module. 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 38: Differential Clock Recovery (Dcr)

    • In CESoPSN, a slave clock is supported for clock redundancy. Scaling Information IM Card Pseudowires Supported (Number of Clocks Derived) 48-Port T1/E1 CEM Interface Module 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 39: Prerequisites For Clock Recovery

    BITS/GPS/Stratum clock. • The minimum packet size of CEM pseudowires on the network that delivers robust clock recovery is 64 bytes. To configure the clock on T1/E1 interfaces for SAToP in controller mode, use the following commands: enable configure terminal...

  • Page 40: Configuring Dcr For T1/E1

    Verifying the Adaptive Clock Recovery Configuration of T1/E1 Interfaces for SAToP Use the show recovered-clock command to verify the adaptive clock recovery of T1/E1 interfaces for SAToP: Router# show recovered-clock Recovered clock status for subslot 0/4...
  • Page 41 Clock Recovery System for SAToP Verifying the Differential Clock Recovery Configuration of T1/E1 Interfaces for SAToP To configure the clock on T1/E1 interfaces for SAToP in controller mode, use the following commands: enable configure terminal controller t1/e1 0/0/1 cem-group 0 unframed...

  • Page 42: Configuring Network Clock

    ESMC Rx Internal NA/Dis QL-SEC *E1 0/1/0 NA/Dis QL-SEC rtr1# Associated Commands The commands used to configure adaptive clock recovery and differential clock recovery are: 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 43: Additional References For Clock Recovery

    Cisco IOS commands Cisco IOS Master Commands List, All Releases Standards and RFCs Standard/RFC Title ITU -T G.8261 Timing and synchronization aspects in packet networks 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
  • Page 44 Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 45: Finding Feature Information

    Clock Recovery (ACR) is a technique where the clock from the TDM domain is mapped through the packet domain. The sending Inter Working Function (IWF) processes outgoing packets with an internal free-running 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 46: Differential Clock Recovery In Cesopsn

    • The long-term average of this rate is equal to the insertion rate at the master IWF. Moreover, the packets in the PSN might switch their order and even be lost. • The IWF at the far end of the PSN (slave IWF) recovers the service clock (E1/T1) used by the master IWF.

  • Page 47: Prerequisites For Clock Recovery

    • The clock ID should be unique for a particular interface module for ACR or DCR configuration. • ACR clock configuration under each controller should be performed before configuring CEM group. 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 48: Clock Recovery System For Cesopsn

    BITS/GPS/Stratum clock. • The minimum packet size of CEM pseudowires on the network that delivers robust clock recovery is 64 bytes. To configure the clock on T1/E1 interfaces for SAToP in controller mode, use the following commands: enable configure terminal...

  • Page 49: Configuring Dcr For T1/E1

    • The minimum packet size of CEM pseudowires on the network that delivers robust clock recovery is 64 bytes. To configure the clock on T1/E1 interfaces for SAToP in controller mode, use the following commands: enable configure terminal...

  • Page 50: Configuring Network Clock

    Frequency Offset(ppb) Circuit-No DIFFERENTIAL ACQUIRED 0 (Port) Use the show running-config | section command to verify the configuration of differential clock of T1/E1 interfaces for SAToP: Router# show running-config | section 0/0/1 controller T1/E1 0/0/1 framing unframed clock source recovered 1...

  • Page 51: Associated Commands

    The commands used to configure adaptive clock recovery and differential clock recovery are: Commands clock recovered adaptive cem http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ interface/command/ir-cr-book/ ir-c2.html#wp8894393830 clock recovered differential cem http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ interface/command/ir-cr-book/ ir-c2.html#wp8894393830 cem-group http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ interface/command/ir-cr-book/ ir-c1.html#wp2440628600 recovered-clock http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ interface/command/ir-cr-book/ ir-o1.html#wp8262293900 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)

  • Page 52: Additional References For Clock Recovery

    To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: http://www.cisco.com/go/mibs 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
  • Page 53 Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
  • Page 54 Clock Recovery System for CESoPSN Additional References for Clock Recovery 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series)
  • Page 55 I N D E X Circuit Emulation Service over Packet-Switched Network (CESoPSN 4, 5, 9, 21 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series) IN-1...
  • Page 56 INDEX 48-Port T1/E1 CEM Interface Module Configuration Guide, Cisco IOS XE Fuji 16.7.x (Cisco NCS 4200 Series) IN-2...

This manual is also suitable for:

E1

Table of Contents