Nebs Compliance - Cisco MDS 9148T Hardware Installation Manual

32-gbps 48-port fibre channel switch

Hide thumbs Also See for MDS 9148T:

Table of Contents

Installing the Cisco MDS 9148T Switch

3. Check if all the power supplies and the fan trays have the expected direction of airflow. Port-side intake

airflow modules have a red coloring, and port-side exhaust airflow modules have blue coloring. For more

information, see

NEBS Compliance

In case of port-side intake airflow, the chassis is not Network Equipment-Building System (NEBS) compliant

by default. To be NEBS compliant, install the NEBS kit by performing these steps:

1. Install the NEBS rack-mount brackets onto the switch.

2. Install the NEBS air baffle by aligning the notches on the baffle with the slots on the brackets and sliding

the ends of the baffle so that the baffle locks into place.

Figure 8: NEBS Kit for 2-Post Installation

• Model and serial number of the damaged unit

• Description of damage

• Effect of damage on the installation

thePower Supplies

Cisco MDS 9148T 32-Gbps 48-Port Fibre Channel Switch Hardware Installation Guide

and

Fan Modules

sections.

NEBS Compliance

Table of Contents

Show Quick Links

Table of Contents