Page 1
Portable Evaporative Air Cooler User Manual Read and save these instructions before use Model: CL401PE / CO401PE www.honeywellaircoolers.com E-mail: info@honeywellaircoolers.com...
PARTS DESCRIPTION Handle Lever for Horizontal Louvers Left Side Grill Louvers Water Level Indicator Rear Grill Screws Water Tank Water Inlet Valve Casters Rear Grill Water Fill Door Power Cord & Plug Control Panel Drain Plug WARNING -- READ AND SAVE THE AIR COOLER SAFETY & MAINTENANCE GUIDE AND USER MANUAL BEFORE USING THIS PRODUCT.
USE & OPERATION CONTROL PANEL COOL SPEED SWING MODE TIMER POWER SLEEP FUNCTION BUTTONS POWER Press the POWER button to turn the unit on. The cooler will start automatically at medium speed. After a few seconds the speed will switch to low. To turn the unit off, press the button again. SPEED Press the SPEED button repeatedly to change the speed between High - Mid - Low - Sleep.
USE & OPERATION (CONTINUED) FUNCTION BUTTONS (CONTINUED) MODE (COOL) Press the MODE button to select COOL mode. Pressing the MODE button until COOL is illuminated on the control panel activates evaporative cooling. The water pump will operate and you will feel the cooler air after the Honeycomb Cooling Media is completely wet.
USE & OPERATION (CONTINUED) COOLER LOCATION Make sure to position the air cooler correctly before you set up and start using the product. Please refer to the COOLER LOCATION section of the separate Safety & Maintenance Guide. FILLING WITH WATER It is ideal to use the Continuous Water Supply Connection to run the unit for long periods of time without refilling the tank.
Page 6
USE & OPERATION (CONTINUED) FILLING WITH WATER (CONTINUED) Note: The water capacity refers to the total volume of water that can be contained within the air cooler water tank and water distribution system. The water capacity in the tank at the “Max.” indicator level may be lower than the actual water capacity of the air cooler.
Page 7
USE & OPERATION (CONTINUED) CLEANING & DRAINING THE WATER TANK Below are instructions on how to clean and maintain your air cooler. If the cooler will not be used for a long period of time, please refer to the STORAGE & MAINTENANCE GUIDELINES located in the separate Safety &...
Page 8
USE & OPERATION (CONTINUED) CLEANING THE HONEYCOMB COOLING MEDIA (CONTINUED) Removing the Honeycomb Cooling Media: Remove the screws from the Rear Grill of the Air Cooler. Carefully pull out the Rear Grill from the Air Cooler. The Honeycomb Cooling Pad is secured on the Rear Grill by two Horizontal Bars that are fixed in place by two screws on the Left and Right Sides of these Horizontal Bars.