ABB ACS350 Installation Instructions

Mul1-r3

Hide thumbs Also See for ACS350:

Download this manual See also: User Manual

ACS350 and ACS150

MUL1-R3 Installation Instructions

WARNING! Before installing MUL1-R3

option, read the safety instructions and

mechanical and electrical installation

instructions in the drive user's manual.

Follow the instructions when installing,

operating and servicing the drive. If

ignored, physical injury or death may

follow, or damage may occur to the

drive, motor or driven equipment.

3. If using FPBA-01 or FCAN-01 option module, remove part

from gland box frame by bending it.

1. Fasten the gland box frame to drive with two M4×12 screws.

4. If control cables or fieldbus option modules will be installed,

remove the detachable lid (4) from the gland box cover.

2. Fasten the gland box frame to wall with four M4 screws (not

included).

5. With any fieldbus option module except FRSA-00, install the

option grounding plate to the gland box frame. See Mechanical

installation in the drive manual.

3AFE68620023 rev. B / 7.12.2005

Page 1 See Mechanical from gland box frame by bending it. remove the detachable lid (4) from the gland box cover. installation in the drive manual. © 2005 ABB Oy. All Rights Reserved. 3AFE68620023 rev. B / 7.12.2005...
Page 2 11. Fasten the hood to wall with one M4 screw (not included). 12. Drive with MUL1-R3 option installed. ABB Oy AC Drives P.O. Box 184 FIN-00381 HELSINKI FINLAND Tel. +358 10 22 11, Fax: +358 10 22 22681, Internet: http://www.abb.com...

Acs150