Advertisement
968XTP Maximum Security Switch - Installation Instructions
968XTP
BALANCED MAGNETIC
HIGH SECURITY SWITCH
Honeywell's 968XTP Maxiumum Security Magnetic Switch is intended to monitor the open or closed position of doors, windows, machinery
safety barriers or other movable assemblies in critical environments where an attempt to defeat the switch is a concern. The switch includes
numerous design features that make it highly defeat-resistant, reduce false alarms and provide for easy and accurate installation.
The performance of the 968XTP is unaffected by the type of surface on which it is mounted (steel or wood). The 968XTP features an
attack-resistant steel jacketed cable.
Step 1 - Install the Tamper Plate
• Line up the edge of the tamper plate with the edge of the door
frame, 1/2" (12.7 mm) [minimum] from the side edge. The
arrows on the tamper plate must be pointing toward the door.
• Mark the six hole centers for drilling pilot mounting holes.
• Drill two #6 (3.5 mm) pilot holes where shown.
• Drill four #8 (4.1 mm) pilot holes where shown.
• Mount the tamper plate in place using two #6 (3.5 mm) screws
[provided].
#8
(4.1 mm)
Screw
Open
Door
Step 3 - Install the Magnet
• Align the edges of the magnet assembly to the edges of the switch assembly.
• Position the magnet assembly so the arrow faces the arrow of the switch assembly.
• Important: Gap distance must be 7/16 ±1/16" (11.1 mm ±1.6 mm).
• Mark the mounting holes, drill pilot holes for #8 (4.1 mm) screws [provided].
• Use the magnet spacer plates to align the front surface of the magnet to match the front surface of the switch.
• Verify that the arrow on the magnet assembly is facing the arrow on the switch assembly.
• Install the necessary spacer plates and magnet assembly on the door with two #8 (4.1 mm) screws [provided].
• See Supplemental Information for wiring instructions.
Switch Assembly
Magnet Assembly
Inswinging Door Instructions
#6
(
3.5 mm
)
#8
Screw
(4.1 mm)
Screw
D O O
R
1/2"
(12.7 mm)
Frame
Align edges
7/16"
(11.1 mm)
Gap
Z
Axis
(inward
swinging)
X
Y
(outward
swinging)
X
Y
Z
Step 2 - Install the Switch
• Install the switch assembly to the tamper plate with four
#8 (4.1 mm) screws [provided]. Make sure that the arrow is
pointing toward the door.
S E P
A R A
W IT
T E F
H M
A G N
- 1 -
Minimum Make /
Maximum Break /
Approach Distance
Removal Distance
inches / mm
0.17 / 4.3
0.53 / 13.5
0.23 / 5.7
D O O
R
O R
U S E
E T O
N L Y
T A M
P E R
S C R
E W
PRELIMINARY DRAFT 11/4/09
inches / mm
0.42 / 10.6
0.72 / 18.2
0.54 / 13.7
Align edges
Adjust height
with spacers
Advertisement
Table of Contents
Related Manuals for Honeywell 968XTP
Summary of Contents for Honeywell 968XTP
- Page 1 The performance of the 968XTP is unaffected by the type of surface on which it is mounted (steel or wood). The 968XTP features an attack-resistant steel jacketed cable.
- Page 2 2” (51 mm) [minimum] from Supplemental Information Wiring the side of the door frame and • The normal condition of the 968XTP is when it is reporting secure, 3/16” 3/16” (4.8 mm) energized by the magnet. (4.8 mm) from the top.