Configuring Web-Based Authentication With Vrf Aware - Cisco Catalyst 2960-X Security Configuration Manual
Cisco ios release 15.0(2)ex
Hide thumbs
Also See for Catalyst 2960-X:
- Command reference manual (135 pages) ,
- Hardware installation manual (34 pages) ,
- Getting started manual (25 pages)
Table of Contents
Advertisement
Configuring Web-Based Authentication
Command or Action
Step 4
l2-webauth-enabled
Example:
Switch (config-params-parameter-map)#
l2-webauth-enabled
Step 5
end
Example:
Switch(config)# end
Step 6
show running-config
Example:
Switch# show running-config
Step 7
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Configuring Web-Based Authentication with VRF Aware
You configure the web-based authentication with VRF aware to redirect the HTML login page to the client.
These steps are optional.
SUMMARY STEPS
1. enable
2. configure terminal
3. parameter-map type webauth global
4. webauth-vrf-aware
5. end
6. show running-config
7. copy running-config startup-config
OL-29048-01
Configuring Web-Based Authentication with VRF Aware
Purpose
Enables the web-based authentication without SVI feature
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
385
Hide quick links:
Advertisement
Table of Contents
