Cisco Catalyst 2960-X Security Configuration Manual page 346
Cisco ios release 15.0(2)ex
Hide thumbs
Also See for Catalyst 2960-X:
- Command reference manual (135 pages) ,
- Hardware installation manual (34 pages) ,
- Getting started manual (25 pages)
Table of Contents
Advertisement
Configuring 802.1x Accounting
SUMMARY STEPS
1. configure terminal
2. interface interface-id
3. aaa accounting dot1x default start-stop group radius
4. aaa accounting system default start-stop group radius
5. end
6. show running-config
7. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2
interface interface-id
Example:
Switch(config)# interface gigabitethernet1/0/3
Step 3
aaa accounting dot1x default start-stop group radius
Example:
Switch(config-if)# aaa accounting dot1x default
start-stop group radius
Step 4
aaa accounting system default start-stop group radius
Example:
Switch(config-if)# aaa accounting system default
start-stop group radius
Step 5
end
Example:
Switch(config-if)# end
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
322
Configuring IEEE 802.1x Port-Based Authentication
Purpose
Enters global configuration mode.
Specifies the port to be configured, and enter interface
configuration mode.
Enables 802.1x accounting using the list of all
RADIUS servers.
(Optional) Enables system accounting (using the list
of all RADIUS servers) and generates system
accounting reload event messages when the switch
reloads.
Returns to privileged EXEc mode.
OL-29048-01
Hide quick links:
Advertisement
Table of Contents
