Removing And Replacing The Rear Housing - Motorola V235 Service Manual

Digital wireless telephone, gsm 850/900/1800/1900 mhz gprs

Hide thumbs Also See for V235:

Table of Contents

Disassembly

Removing and Replacing the Rear Housing

This product contains static-sensitive devices. Use anti-static handling procedures

to prevent electrostatic discharge (ESD) and component damage.

Remove the battery cover, battery, SIM, and antenna as described in the

procedures.

In addition to 4 screws, the rear housing assembly is fastened with plastic latches.

These are fragile and should be released with care.

Use the metal tweezers to remove the two rubber screw covers near the

antenna. Retain the screw covers for reassembly.

Using a Torx driver with a T-6 bit, remove the 4 screws at each corner of the

rear housing. Retain the screws for reassembly. See Figure 5.

Housing Screw

Figure 5. Removing the Rear Housing Screws

Release the two housing latches by inserting the pointed end of the plastic

disassembly tool into the openings on the rear housing.

Housing Latch

April 03, 2006

V235 GSM

Housing Screw

6809495A43-C

050478o

Table of Contents

Show Quick Links

Table of Contents