Table of Contents
Advertisement
Appendix E
16 x D1 and 8 x D1 Video Capture Cards
Connect the PTZ analog camera(s):
Step 4
Single Camera Configuration, page E-15
•
Multiple Camera Configuration, page E-16
•
Single Camera Configuration
If only one PTZ analog camera is used:
Connect a RS-232 cable from the COM (serial) port on the camera to the serial port adapter on the
a.
Multiservices Platform Series, as shown in
Note
Connect the BNC video cable between the camera and the BNC breakout panel.
b.
Continue to
c.
Figure E-11
1
1
Analog PTZ camera.
2
RS-232 serial cable to provide PTZ
control for a single analog camera.
3
Serial port on the 1-RU or 2-RU
Multiservices Platform Series.
4
Serial cable adapter used to connect
individual RS-232 wires from the camera.
OL-21838-03
Connect the wires from the PTZ analog camera according to the camera documentation. The
PTZ controls will not work if the serial cable wires are incorrectly attached.
Step
5.
Single Analog PTZ Camera: Serial and BNC Cable Connections
2
RS-232 serial cable
BNC video cable
8
Configuration Instructions for Cisco Video Surveillance
Figure
E-11.
3
4
7
5
16 x D1 and 8 x D1 video capture cards installed
in a Multiservices Platform Series.
6
Multi-channel video cable.
7
BNC breakout panel.
8
BNC video cable connected between the camera
and the BNC breakout panel.
Cisco Physical Security Multiservices Platform Series User Guide
5
1
20
6
E-15
Hide quick links:
Advertisement
Table of Contents
