7. REPLACEMENT OF LAMP, LAMP CAP AND LAMP COVER ------------------------------------------- 6 7-1. Replacement of the Lamp ---------------------------------------------------------------------------------------- 6 7-2. Replacement of the Lamp Cover ------------------------------------------------------------------------------- 6 7-3. Replacement of the Lamp Cap ------------------------------------------------------------------------------- 6 8. SPARE PARTS --------------------------------------------------------------------------------------------------------- 7 Assembly Diagram for UB 18DSL...
1. PRODUCT NAME Hitachi Cordless Lantern, Model UB 18DSL 2. MARKETING OBJECTIVE The Model UB 18DSL is a fluorescent lantern that works on Hitachi BSL 14 series batteries. 3. APPLICATIONS For construction work, outdoor use, etc. 4. SELLING POINTS Holes for attaching a strap The handle has holes to attach a user's strap.
4-1. Selling Point Descriptions 4-1-1. Rotary hooked handle The Model UB 18DSL has a hooked handle. It can be hung on a pipe up to 50 mm (2 inches) in diameter and locked in eight positions in increments of 45°.
Dimensions (without battery) (12" x 3-3/4" x 3-25/32") : The Model UB 18DSL is currently applicable to 14.4-V slide-type lithium-ion batteries only. However, this model is also designed for use with18-V batteries, so "18" is indicated on the model name.
5-2-3. Specification of fluorescent lamp The Model UB 18DSL is equipped with a natural (EX-D), compact fluorescent lamp equivalent to FPL 9W. Use the fluorescent lamp specifically designed for the Model UB 18DSL (code number 323339, model FPL9 EX-D).
Otherwise, the service life of the fluorescent lamp may be shortened and short circuit may be caused. If the Model UB 18DSL is left for a long time with the switch turned on and the battery installed, the service life of the battery may also be shortened due to overdischarge.
* The Lamp Cap [2] is provided at the tip of the Lamp [3] to prevent breakage of the lamp in case of accidental drop of the Model UB 18DSL. Be sure to reinstall the Lamp Cap [2] to the new Lamp [3].
Fig. 2 Handle Switch Reflector Sheet [5] Lamp Cap [2] Battery Latch Lamp Cover [1] Fig. 1 Fig. 3 8. SPARE PARTS The spare parts for the Model UB 18DSL are as follows. (1) Lamp (2) Lamp cover (3) Lamp cap...
Page 10
LIST NO. H805 CORDLESS LANTERN Model UB 18DSL (E1)
Page 11
PARTS UB 18DSL ITEM CODE NO. DESCRIPTION REMARKS USED 323-340 LAMP COVER 323-519 LAMP CAP 323-339 LAMP (100V 9W) MAIN BODY 326-194 REFLECTOR SHEET - 2 - Printed in Japan 3 - 08 *ALTERNATIVE PARTS (080314N)