Cisco MDS 9216 Configuration Manual page 48

Mds 9000 series san volume controller

Hide thumbs Also See for MDS 9216:

Table of Contents

Configuring Quorum Disks

To configure quorum disk allocation, follow these steps:

Create a cluster called SampleCluster.

Step 1

switch(svc)# cluster config SampleCluster

switch(svc-cluster)#

Sets the quorum disk ID for the specified MDisk in this cluster.

Step 2

switch(svc-cluster)# quorum disk 2 mdisk 1

When you issue this command, the Mdisk that was previously-assigned the quorum index 2 will no

longer be a quorum disk.

If the quorum command fails due to the lack of sufficient extents in the new quorum disk, the old

Caution

quorum disk may no longer be operational.

Cisco MDS 9000 Family SAN Volume Controller Configuration Guide

4-8

Chapter 4

Managing Back-End Storage

78-16119-01, Cisco MDS SAN-OS Release 1.3

Table of Contents

Mds 9500 series