ORDER NO. MD0808003CE AV Control Receiver SA-BX500PP Colour (K).......Black Type Specifications Main unit SA-BX500PP Rated power at 20 Hz-20 kHz 0.7% (6 Ω) GENERAL Power supply: AC 120V, 60 Hz Power output each channel driven at 20 Hz-20 kHz Power consumption:...
Page 2
SA-BX500PP 4 to 8 Ω An exclusive terminal for SH-PD10 (option) Center: 6 to 8 Ω VIDEO SECTION Surround (L/R): Output voltage at 1 V input (unbalanced) 6 to 8 Ω 1 ± 0.1 Vp-p Surround Back (L/R): Maximum input voltage 6 to 8 Ω...
SA-BX500PP CONTENTS Page Page 1 Safety Precautions 7.14. Disassembly and checking of D-Amp A (4CH) P.C.B. 1.1. GENERAL GUIDELINES 7.15. Replacement of Digital Amp IC (IC5000) of D-Amp A 1.2. Before Repair and Adjustment (4CH) P.C.B. 1.3. Protection Circuitry 7.16. Disassembly and checking of HDMI side (A) and side (B) 1.4.
SA-BX500PP 1 Safety Precautions 1.1. GENERAL GUIDELINES 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.
SA-BX500PP “shorted”, or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used. If this occurs, follow the procedure outlines below: 1. Turn off the power. 2. Determine the cause of the problem and correct it.
SA-BX500PP 2 Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip”...
SA-BX500PP 3 About Lead Free Solder (PbF) 3.1. Service caution based on legal restrictions 3.1.1. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation.
SA-BX500PP 4 Accessories • • • • Note: Refer to “Replacement Parts List” (Section 25) for the part number. AM loop antenna Remote control AC cord Setup microphone Front terminal cover FM indoor antenna...
SA-BX500PP 5 Operation Procedures 5.1. Remote Control Key Buttons Operations Remote control For switching an input Batteries source on and off/ Source switching/ Press on the tab to open. Switching remote control modes SYSTEM RECORDER Power button INPUT SELECTOR FM/AM...
SA-BX500PP 5.2. Main Unit Key Buttons Operations This unit Lights on when BI-AMP is on Lights on when playing a disc using multi-channel LPCM format For switching the surround playback on Lights on when playing a disc using and off (The indicator lights up when the high definition audio format such as surround playback is on.)
HDMI CEC cannot be guaranteed. This unit suppor ts "HDAVI Control 1" function. This standard is compatible with Panasonic’s conventional HDAVI equipment. Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function. What you can do with VIERA Link "HDAVI Control"...
SA-BX500PP 5.4. Main Unit Connections 5.4.1. Video & Audio Terminals Basic connections Connecting cables to video and audio terminals (Connecting equipment without HDMI terminal) Connection cab Video cable Audio cable Video connection cable (not included) Optical fiber cable (not included)
RP-CDHG50 (5.0 m/16.4 ft), etc. HDMI cable notes It is recommended that you use Panasonic s HDMI cable. This unit incorporates HDMI (V .1.3 with Deep Color) technology. Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).
Page 15
SA-BX500PP 5.4.3. S Video and audio Terminals Connecting cables to S video and audio terminals Connection cable Video cable S VIDEO connection cab le (not included) Audio cable Optical fibre cable (not included) Stereo connection cable (not included) White (L)
Page 16
SA-BX500PP 5.4.4. Component and audio terminals Connecting cables to component and audio terminals The component video terminals can produce more accurate colours than the S video terminals. Connection cable Video cable Audio cable Video connection cable (not included) Optical fibre cable (not included)
SA-BX500PP 5.4.5. Other connections Other connections Connection cable Video cable Video connection cable (not included) S VIDEO connection cab le (not included) Audio cable Coaxial cable (not included) Stereo phono cab le (not included) White (L) To enjoy analogue sounds...
Page 18
SA-BX500PP Other connections To connect the unit for audio or picture recording You can record audio or pictures to the equipment connected to DVD recorder output terminal (AUDIO, VIDEO, S VIDEO). Rear panel BACK (DVD RECORDER) (BD/DVD PLAYER) (CABLE/SAT) HDMI 2...
Page 19
SA-BX500PP 5.4.6. For speakers Connecting other speakers To connect bi-wire speakers Make sure to select YES in Making bi-wire setting when you connect the unit to bi-wire speakers. The speakers do not produce adequate sounds unless you make this setting.
SA-BX500PP To enjoy wireless audio with SH-FX67 You can connect left and right surround speakers wirelessly by using Panasonic SH-FX67 (a set consisted of a digital transmitter and a wireless system sold separately) with the unit. To use these options, insert the digital transmitter into the unit s digital transmitter terminal and connect surround speakers to SH-FX67’s wireless system.
SA-BX500PP 6 Self-Diagnosis and Display Function This unit is equipped with the self diagnosis display function, which alarms faulty operation with error code. Use this function during servicing. 6.1. Automatically Displayed Error Codes An error code automatically appears on the display (FL Display) when faulty operation is detected. Refer to Fig. 6.1.
SA-BX500PP Message Cause/countermeasure NO LS/RS SPEAKERS Surround speakers are set as absent. Change their setting to present. LS/RS SBL/SBR Surround and surround back speakers are set as SPEAKERS absent. Change their setting to present. NO SBL/SBR SPEAKERS Surround back speakers are set as absent.
SA-BX500PP Fig 6.2 3. When the [SPEAKER A] button is pressed, the current program filing number [M45_XXXX] appears. The XXXX digit indicates the ROM checksum used for ROM collection, and if the unit is not loaded with ROM, “NO” appears.
SA-BX500PP Fig 6.3 3. Doctor mode function at some remote control codes as below table. Remote Control Test Mode Function and settings Selector Surround Other settings Vol/Tone CH 1 TUNER Frequency: FM min. -48dB/0dB CH 2 TUNER Frequency: FM max.
Page 25
SA-BX500PP is not function. (Volume adjustment or Mute also unfunction) <FX67 Common frequency fixed method> Preparation: Beforehand, press remote control [FM/AM], remote control side, will appear FM/AM code stage. Below is operation of wireless frequency fixed method. Function Button Condition...
SA-BX500PP 7 Assembling and Disassembling “ATTENTION SERVICER” Be careful when disassembling and servicing. Some chassis components may have sharp edges. Special Note: 1. This section describes the disassembly procedures for all the major printed circuit boards and main components. 2. Before the disassembly process was carried out, do take special note that all safety precautions are to be carried out.
SA-BX500PP 7.3. Disassembly of Top Cabinet Step 1 Remove 4 screws at the sides of the top cabinet. Step 2 Remove 5 screws at the rear of the top cabinet. Step 3 Lift up the top cabinet as arrow shown.
SA-BX500PP Step 4 Flip the DSP P.C.B. as arrow shown. Step 3 Proceed to check the Speaker P.C.B. Step 5 Proceed to check Side B of DSP P.C.B.. Caution: Insulate Speaker P.C.B. from other parts by insulating material (e.g.: plastic).
Page 31
SA-BX500PP Step 8 Remove 2 P.C.B. bracket on D-Amp B (3CH) P.C.B. Step 9 Flip D-Amp B (3CH) and Fan P.C.B. as arrow shown. Step 4 Cut 3 tie wraps. Step 10 Move Speaker P.C.B. as arrow shown. Note: During assembling it is necessary to use tie wraps.
SA-BX500PP P.C.B. Step 4 Remove the D-Amp B (3CH) P.C.B. as arrow shown. Caution: Insulate Speaker P.C.B. from other parts insulating Step 5 Desolder pins of the digital amp IC (IC5000) on the back material (e.g.: plastic). side of D-Amp P.C.B.
SA-BX500PP Step 6 Move up the support bar as arrow shown and beware of the catches. Special Note: For replacement of IC5200, IC5300, repeat the (Step 1) to (Step 8). Refer to the diagrams of D-Amp B (3CH) P.C.B. (Item 14.8) for location of the parts.
SA-BX500PP Step 8 Connect extension cable REXX0651 (8P cable from Special Note: During reassembling procedures, ensure the H5801 to CN5500). P.C.B. is seated properly at the locators. Step 9 Remove AC Inlet shield plate unit. Step 10 Remove P.C.B. bracket.
SA-BX500PP Step 3 Solder pins of the switch regulator IC (IC5701) on the Step 2 Remove 1 screw from the switch regulator IC (IC5701). reverse side of SMPS P.C.B. Step 3 Remove the switch regulator IC (IC5701) from the heatsink unit B.
Page 36
SA-BX500PP heatsink unit B. Special Note: Ensure the switch regulator diode (D5702) is tightly screwed to the heatsink unit B. Step 3 Fix the heatsink unit B on SMPS P.C.B. in the direction of arrows. Step 4 Fix and screw the switch regulator IC (IC5701) to the heatsink unit B Step 3 Remove 1 screw from the switch regulator IC (IC5701).
SA-BX500PP screwed to the heatsink unit C. 7.11. Replacement of Regulator Diode (D5801) • • • • Follow (Step 1) to (Step 4) of Item 7.3. • • • • Follow (Step 1) to (Step 3) of Item 7.5. • • • • Follow (Step 1) to (Step 10) of Item 7.6.
SA-BX500PP Step 2 Remove 1 screw from the regulator diode (D5802). Step 3 Remove the regulator diode (D5802) from the heatsink unit C. Step 3 Solder pins of the regulator diode (D5802) on the reverse side of SMPS P.C.B. Caution: Handle the heatsink unit C with caution due to its high temperature after prolonged use.
SA-BX500PP Step 2 Remove 1 screw from the regulator diode (D5803). Step 3 Solder pins of the regulator diode (D5803) on the Step 3 Remove the regulator diode (D5803) from the heatsink reverse side of SMPS P.C.B. unit C. Caution: Handle the heatsink unit C with caution due to its high temperature after prolonged use.
SA-BX500PP Caution: Lay an Insulated material to support the D-Amp A (4CH) P.C.B. Step 2 Remove 2 screws on D-Amp (4CH) P.C.B.. Step 3 Attach original cable with extension cable REXX0651 (8P cable from H5801 to CN5500). Step 4 Connect extension cable REEX0815 (17P cable from CN2802 to CN5050).
SA-BX500PP (CN5501) on D-Amp A (4CH) P.C.B. injuries. Step 4 Detach 12P cable at the connector (JW4602) on Speaker P.C.B. Step 5 Remove the D-Amp A (4CH) P.C.B. as arrow shown. Special Note: For replacement of IC5200, IC5300 & IC5400, repeat the (Step 1) to (Step 8).
SA-BX500PP Step 3 Proceed to check S-Video and Video P.C.B.. Step 4 Proceed to check side (B) of HDMI P.C.B. 7.17. Disassembly and Checking of S-Video & Video P.C.B. • • • • Follow (Step 1) to (Step 4) of Item 7.3.
Page 43
SA-BX500PP Step 3 Remove 7 screws on the rear panel. Step 9 Detach 11P FFC cable at the connector (PB4401) on Digital P.C.B. Step 10 Remove Digital P.C.B. as arrow shown. Step 4 Release 2 catches at the rear panel.
SA-BX500PP Step 4 Position the P.C.B as diagram show. Step 5 Connect Wireless Adapter, Digital & D-Port P.C.B.. Step 12 Position D-Port P.C.B. as Diagram shown. Step 6 Proceed to check Side A of Main P.C.B. Step 13 Connect 22P FFC Cable at the connector (CN6301) on Wireless Adapter P.C.B..
SA-BX500PP Step 3 Detach 30P FFC cable at the connector (PB501) on Main P.C.B.. Step 4 Detach 7P cable at the connector (PB502) on Main P.C.B. Step 5 Detach 5P cable at the connector (PB1002) on Main P.C.B. Step 10 Proceed to check Side B of Main P.C.B.
SA-BX500PP Step 8 Remove 4 screws. Step 3 Remove 6 screws at front panel shield plate. Step 9 Slightly move up 2 support bars and DSP P.C.B. to Step 4 Remove the front panel shield plate. release the catches. Step 10 Release 2 tabs.
Page 47
SA-BX500PP Caution: Keep the VCR Earth Angle in safe place. Avoid denting it. Place it back during assembling. Step 8 Connect Panel, Volume, Headphone P.C.B. Step 9 Proceed to check Panel, Volume, Headphone P.C.B.
SA-BX500PP 8 Voltage and Waveform Chart 8.1. HDMI P.C.B. REF NO. IC2001 MODE CD PLAY STANDBY IC2002 REF NO. MODE CD PLAY STANDBY IC2002 REF NO. MODE CD PLAY STANDBY REF NO. IC2002 MODE CD PLAY STANDBY REF NO. IC2002...
Page 49
STANDBY Q2231 Q2232 Q2233 REF NO. MODE CD PLAY -0.2 STANDBY -0.2 REF NO. Q2234 Q2235 Q2236 MODE CD PLAY -0.2 -0.2 -0.2 STANDBY -0.2 -0.2 -0.2 QR2001 QR2002 QR2231 QR2232 REF NO. MODE CD PLAY STANDBY SA-BX500PP HDMI P.C.B.
SA-BX500PP 8.2. DSP P.C.B. REF NO. IC3001 MODE CD PLAY STANDBY IC3001 REF NO. MODE CD PLAY STANDBY IC3001 REF NO. MODE CD PLAY STANDBY REF NO. IC3001 MODE CD PLAY STANDBY IC3001 REF NO. MODE CD PLAY STANDBY IC3001 REF NO.
Page 51
SA-BX500PP IC3101 REF NO. MODE CD PLAY STANDBY REF NO. IC3101 MODE CD PLAY STANDBY IC3101 REF NO. MODE CD PLAY STANDBY REF NO. IC3101 MODE CD PLAY STANDBY REF NO. IC3101 MODE CD PLAY STANDBY IC3101 REF NO. MODE...
Page 52
STANDBY REF NO. IC3551 MODE CD PLAY STANDBY REF NO. IC3601 MODE CD PLAY STANDBY IC3602 REF NO. MODE CD PLAY STANDBY Q3601 REF NO. MODE CD PLAY STANDBY REF NO. QR3401 QR3601 MODE CD PLAY STANDBY SA-BX500PP DSP P.C.B.
REF NO. IC5500 MODE CD PLAY STANDBY REF NO. IC5501 MODE CD PLAY STANDBY REF NO. Q5101 Q5102 Q5601 Q5602 Q5603 MODE CD PLAY STANDBY REF NO. Q5604 Q5640 Q5641 Q5642 Q5644 MODE CD PLAY STANDBY SA-BX500PP D-AMP A (4CH) P.C.B.
REF NO. IC5500 MODE CD PLAY STANDBY REF NO. IC5501 MODE CD PLAY STANDBY REF NO. Q5101 Q5102 Q5601 Q5602 Q5603 MODE CD PLAY STANDBY Q5604 Q5640 Q5642 Q5644 REF NO. MODE CD PLAY STANDBY SA-BX500PP D-AMP B (3CH) P.C.B.
SA-BX500PP 8.5. Main P.C.B. REF NO. IC101 MODE CD PLAY STANDBY IC1001 REF NO. MODE CD PLAY STANDBY REF NO. IC1102 MODE CD PLAY -7.5 STANDBY -7.5 IC4001 REF NO. MODE CD PLAY -7.5 STANDBY -7.5 REF NO. IC4001 MODE...
Page 56
SA-BX500PP REF NO. IC4261 MODE CD PLAY STANDBY REF NO. IC4301 MODE CD PLAY -7.6 STANDBY -7.6 IC4303 REF NO. MODE CD PLAY -6.2 -7.6 -6.2 STANDBY -6.2 -7.6 -6.2 REF NO. IC4304 MODE CD PLAY -6.2 -7.6 -6.2 STANDBY -6.2...
Page 57
CD PLAY -7.2 -7.2 -7.2 STANDBY -7.2 -7.2 -7.2 QR4306 QR4401 QR4402 QR4403 QR7001 REF NO. MODE CD PLAY STANDBY QR7105 QR7106 QR7109 QR8011 QR8012 REF NO. MODE CD PLAY STANDBY QR8017 REF NO. MODE CD PLAY STANDBY SA-BX500PP MAIN P.C.B.
CD PLAY STANDBY Q1001 Q1002 Q1003 REF NO. MODE CD PLAY -4.9 -7.5 -5.5 STANDBY -4.9 -7.5 -5.5 SA-BX500PP VIDEO P.C.B. 8.9. S-Video P.C.B. REF NO. IC1051 MODE CD PLAY -4.9 STANDBY -4.9 REF NO. IC1052 MODE CD PLAY -4.9 STANDBY -4.9...
SURROUND 8CH) PB3002 BACK VIDEO P.C.B. HDMI 1 IN SUBWOOFER/ (SOLDER SIDE) (DVD RECORDER) PB2004 CN3005 CENTER PB3005 PA1001 JWA1501* PA1002 CN2004 JK2101 PB603 (CD) IN CN8004 CN8003 JK4001 HDMI OUT CN3001 CN2003 * FOR INDICATION ONLY SA-BX500PP WIRING CONNECTION...
IC2201 / HDMI RECEIVER SIGNAL NAME Port Name Pin No Pin No Port Name TMDS D0- R2X0- R2X0- TMDS D0+ R2X0+ R2X0+ TMDS D1- R2X1- R2X1- TMDS D1+ R2X1+ R2X1+ TMDS D2- R2X2- R2X2- TMDS D2+ R2X2+ R2X2+ SA-BX500PP IC TERMINAL (HDMI) CHART...
SETUP MIC PC501 PB1002 A+7.5V DGND QR4012 VOL DA Q4008 VOL DA MUTING MIC MUTE MUTING FROM CONTROL SYSTEM CONTROL VOL CL BK+3.3V VOL CL FROM SYSTEM CONTROL QR4009 MUTING +6DB CONTROL SECTION (2/2) BK+3.3V SA-BX500PP AUDIO (SECTION 1/2) BLOCK DIAGRAM...
Page 73
CONTROL CONTROL QR4306 IC4261 C0ABBB000038 BK+3.3V BK+3.3V MUTING nHDMI MUTE nHDMI MUTE OP-AMP(SURR. OUT 2CH) CONTROL SOUT L PB3002 CN3002 SOUT 2CHL SOUT 2CHL TO DSP SOUT R SOUT 2CHR SOUT 2CHR PB3002 CN3002 SA-BX500PP AUDIO (SECTION 2/2) BLOCK DIAGRAM...
DC DET Q5640, Q5642, Q5644 CN5501 JW5993 CN5991 FAN DC OUT H5801 CN5500 FAN MOTOR FAN DC FROM POWER DRIVE CN5501 JW5993 CN5991 FAN GND DIGITAL AUDIO OSC2 CN8003 CN5050 OSC2 AMP (3CH) SA-BX500PP DIGITAL AUDIO AMP (4CH) BLOCK DIAGRAM...
CN5050 DC DET DC DETECT FROM DIGITAL AUDIO OSC2 CN8004 CN5050 OSC2 AMP (4CH) Q5640, Q5642, Q5644 FAN DC OUT CN5501 H5802 CN5500 FAN DC FAN MOTOR FROM POWER DRIVE FAN GND CN5501 SA-BX500PP DIGITAL AUDIO AMP (3CH) BLOCK DIAGRAM...
JK4603 FRONT B (HF) R JK4603 CN5550 JW4602 SBR- FROM CN5550 JW4602 SBL- SBL- RY4604 DIGITAL AUDIO AMP (4CH) JK4603 FRONT A (LF) L JK4603 JK4603 CN5550 JW4602 FRONT A (LF) R JK4603 CN5550 JW4602 SA-BX500PP SPEAKER CHANNEL BLOCK DIAGRAM...
MON OUT C REC IN C AUX S-VIDEO C 75Ohm DRIVER PC501 PA1051 AUX S-VIDEO Y VCR IN C REC OUT C JK501 (S-VIDEO) C IN 75Ohm PC501 PA1051 AUX S-VIDEO C DRIVER PANEL P.C.B. SA-BX500PP VIDEO (S-VIDEO) BLOCK DIAGRAM...
POWER CONTROL Q7004 D5804 CN5802 CN7001 A-7.5V A-7.5V - 13V A-7.5V REGULATOR IC5801 C0DABFC00002 SHUNT REGULATOR Q5802, D5806 Q5803 PC5720 FROM AMBP CN5802 CN7001 SWITCHING FEED BACK FEED BACK CIRCUIT SYSTEM CONTROL SECTION (2/2) SA-BX500PP POWER (SECTION 1/2) BLOCK DIAGRAM...
SA-BX500PP : Mic signal line 12 Schematic Diagram Notes • • • • This schematic diagram may be modified at any time with the development of new technology. Notes: S501: Power switch ( S502: Speaker A switch. S503: Surround switch.
Page 84
SA-BX500PP SCHEMATIC DIAGRAM - 2 HDMI CIRCUIT : +B SIGNAL LINE : MAIN SIGNAL LINE : VIDEO SIGNAL LINE : AUDIO SIGNAL LINE CN2004 QR2002 R2041 B1GBCFJJ0007 CEC_LED R2035 CN2003 CEC_LED DC DETECT D2001 MA2J72800L H_LED R2057 R2036 MCLK_BACK HDMI_LED...
Page 86
SA-BX500PP SCHEMATIC DIAGRAM - 4 HDMI CIRCUIT : +B SIGNAL LINE : MAIN SIGNAL LINE : VIDEO SIGNAL LINE : AUDIO SIGNAL LINE IC2233 R2231 TO HDMI C0CBCAG00015 SECTION (2/4) +1.8V REGULATOR HDMI POWER LB2231 LB2235 BK2.5V HOT PLUG J0JHC0000021...
SA-BX500PP 13.3. Main Circuit SCHEMATIC DIAGRAM - 11 MAIN(AUDIO) CIRCUIT : +B SIGNAL LINE : -B SIGNAL LINE : MAIN SIGNAL LINE : IPOD AUDIO SIGNAL LINE : AM/FM SIGNAL LINE : MIC SIGNAL LINE : AUDIO SIGNAL LINE JK4007...
Page 94
SA-BX500PP SCHEMATIC DIAGRAM - 12 MAIN(AUDIO) CIRCUIT : +B SIGNAL LINE : -B SIGNAL LINE : MAIN SIGNAL LINE : IPOD AUDIO SIGNAL LINE : AM/FM SIGNAL LINE : MIC SIGNAL LINE : AUDIO SIGNAL LINE BK+3R3V BK+3R3V IC4051 DSP_A+5V...
SA-BX500PP 15 Basic Troubleshooting Guide 15.1. Troubleshooting Guide for F61 and/or F76 This section illustrates the checking procedures when upon detecting the error of “F61” and/or “F76” after power up of the unit. It is for purpose of troubleshooting and checking in SMPS, D-Amp & Power Supply P.C.B.
Page 126
SA-BX500PP 15.1.2. Troubleshooting Guide Symptom Checking Items Repair Items Remarks Check the soldering of the SMPS Tou ch-up the solder crack area/ FL display blinking with SMPS P. C.B. Change the defective parts. abnormal segment when P. C.B. · ·...
Page 128
SA-BX500PP 15.1.3.2. D-Amp A (4CH) P.C.B. Transistor: Q5640, Q5642, Q5644 (Fan circuit) IC 5400 IC 5000 IC 5200 IC 5300 D-AMP IC D-AMP IC D-AMP IC D-AMP IC Muting Circuit D-Amp A (4CH) P.C.B. Fig. 2 D-Amp P.C.B...
Page 129
SA-BX500PP CN5501 Fig. 3 Fan Connector...
Page 130
SA-BX500PP 15.1.3.3. D-Amp B (3CH) P.C.B. Transistor: Q5640, Q5642, Q5644 (Fan circuit) IC 5000 IC 5200 IC 5300 D-AMP IC D-AMP IC D-AMP IC Muting Circuit D-Amp B (3CH) P.C.B.
Page 131
SA-BX500PP 15.1.3.4. D-Amp IC Configuration of D-Amp A (4CH) P.C.B. BX500PP Pin (10) Sub-Woofer + IC5300 Pin (14) Sub-Woofer - Pin (10) Center + IC5200 Center - Pin (14) Pin (10) Front Right IC5000 Pin (14) Front Left Surround Pin (10)
Page 132
SA-BX500PP 15.1.3.5. D-Amp IC Configuration of D-Amp B (3CH) P.C.B. BX500PP Pin (10) Sub-Woofer + IC5300 Pin (14) Sub-Woofer - Pin (10) Center + IC5200 Center - Pin (14) Pin (10) Front Right IC5000 Pin (14) Front Left Table 1...
SA-BX500PP 17 Terminal Function of IC’s 17.1. IC8001 (RFXWBX500EBK): Micro-processor Not available at the moment. 17.2. IC501 (C0HBB0000057): IC FL Driver Terminal Name Function LED1 O Led Drive Output LED2 O Led Drive Output LED3 O Led Drive Output LED4...
SA-BX500PP 19 Replacement Parts List Notes: • • • • Important safety notice: Components identified by mark have special characteristics important for safety purpose. Furthermore, special parts which have purposes of fire-retardant (resistors), high-quality sound (capacitors), low-noise (resistors), etc. are used.
Page 142
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks N2QAKB000069 REMOTE CONTROL IC3102 RFKWFDE002AA IC FLASH ROM A1-1 RKK-NC9GCS R/C BATTERY COVER IC3103 C3ABMG000238 IC SDRAM K2CB2CB00021 AC CORD IC3104 C3ABMG000238 IC SDRAM...
Page 143
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks Q2232 B1CFGD000002 TRANSISTOR QR4014 B1GBCFJJ0007 TRANSISTOR Q2233 B1HBCFA00003 TRANSISTOR QR4304 B1GDCFJJ0008 TRANSISTOR Q2234 B1CFGD000002 TRANSISTOR QR4305 B1GDCFJJ0008 TRANSISTOR Q2235 B1CFGD000002 TRANSISTOR QR4306 B1GBCFJJ0007...
Page 144
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks D5003 B0HCMM000019 DIODE D8012 B0ACCK000005 DIODE D5004 B0HCMM000019 DIODE D8013 B0ACCK000005 DIODE D5201 B0HCMM000019 DIODE D8014 B0ACCK000005 DIODE D5202 B0HCMM000019 DIODE DZ5701 ERZV10V511CS...
Page 145
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks CONNECTORS L3602 G1A220G00006 COIL L4403 G1C1R0MA0061 INDUCTOR CN611 K1FY124DA001 OPTION PORT CONNECTOR L4404 G1C1R0MA0061 INDUCTOR CN2001 K1MN10BA0147 10P CONNECTOR L4601 G0B9R5K00003 LINE FILTER...
Page 146
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks LB2211 J0JHC0000021 INDUCTOR LB8535 J0JBC0000014 INDUCTOR LB2231 J0JCC0000119 INDUCTOR LB8536 J0JBC0000014 INDUCTOR LB2232 J0JCC0000119 INDUCTOR LB2233 J0JCC0000119 INDUCTOR TRANSFORMERS LB2234 J0JCC0000119 INDUCTOR LB2235...
Page 147
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks JK1003 K2HA2YYB0009 JK VID (GAME IN) / (CABLE/SAT LB6304 ERJ3GEY0R00V 0 1/10W LB6305 ERJ3GEY0R00V 0 1/10W JK1004 K2HA608B0012 JK COM VID (TV MON OUT) / (1...
Page 148
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R540 ERJ3GEYJ103V 10K 1/10W R1078 ERJ3GEYJ750V 75 1/10W R542 ERJ3GEYJ181V 180 1/10W R1079 ERJ3GEYJ750V 75 1/10W R543 ERJ3GEYJ271V 270 1/10W R1080 ERJ3GEYJ473V 47K 1/10W...
Page 149
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R2053 ERJ3GEY0R00V 0 1/10W R2238 ERJ3GEYJ223V 22K 1/10W R2054 ERJ3GEY0R00V 0 1/10W R2239 ERJ3GEYJ223V 22K 1/10W R2055 ERJ3GEY0R00V 0 1/10W R2240 ERJ3GEYJ103V 10K 1/10W...
Page 150
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R3034 ERJ3GEYJ220V 22 1/10W R3120 ERJ3GEYJ220V 22 1/10W R3035 ERJ3GEYJ220V 22 1/10W R3121 ERJ3GEYJ220V 22 1/10W R3036 ERJ3GEYJ220V 22 1/10W R3122 ERJ3GEYJ220V 22 1/10W...
Page 151
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R3201 ERJ3GEYJ101V 100 1/10W R3708 ERJ3GEYJ221V 220 1/10W R3205 ERJ3GEYJ101V 100 1/10W R3709 ERJ3GEYJ221V 220 1/10W R3209 ERJ3GEYJ103V 10K 1/10W R3714 ERJ3GEYJ101V 100 1/10W...
Page 152
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R4058 ERJ3GEYJ473V 47K 1/10W R4152 ERJ3GEYJ473V 47K 1/10W R4059 ERJ3GEYJ473V 47K 1/10W R4153 ERJ3GEYJ473V 47K 1/10W R4060 ERJ3GEYJ473V 47K 1/10W R4154 ERJ3GEYJ473V 47K 1/10W...
Page 153
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R4248 ERJ3GEYJ102V 1K 1/10W R4360 ERJ3GEYJ473V 47K 1/10W R4250 ERJ3GEYJ562V 5.6K 1/10W R4361 ERJ3GEYJ222V 2.2K 1/10W R4251 ERJ3GEYJ103V 10K 1/10W R4362 ERJ3GEYJ222V 2.2K 1/10W...
Page 154
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R5033 ERJ3GEYJ562V 5.6K 1/10W R5660 ERJ3GEYJ103V 10K 1/10W R5034 ERJ3GEYJ562V 5.6K 1/10W R5670 ERJ3GEY0R00V 0 1/10W R5035 ERJ3GEYJ562V 5.6K 1/10W R5701 ERDS1TJ475B 4.7M 1/2W...
Page 155
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R7007 ERJ6GEYJ152V 1.5K 1/8W R8057 ERJ3GEYJ101V 100 1/10W R7009 ERJ3GEYJ272V 2.7K 1/10W R8058 ERJ3GEYJ101V 100 1/10W R7010 ERJ3GEYJ471V 470 1/10W R8059 ERJ3GEYJ101V 100 1/10W...
Page 156
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R8415 ERJ3GEYJ104V 100K 1/10W C554 ECA1CAK470XB 47uF 16V R8416 ERJ3GEYJ104V 100K 1/10W C555 ECJ1VC1H101J 100pF 50V R8417 ERJ3GEYJ104V 100K 1/10W C556 ECJ1VC1H101J 100pF 50V...
Page 157
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C1065 ECJ1VB1H104K 0.1uF 50V C2124 F1J1A106A043 10uF 10V C1066 ECA0JAK101XB 100uF 6.3V C2125 ECJ1VB1C104K 0.1uF 16V C1067 ECJ1VB1E223K 0.022uF 25V C2126 ECJ1VB1C104K 0.1uF 16V...
Page 158
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C2275 ECJ1VB1C104K 0.1uF 16V C3105 ECJ1VB1C104K 0.1uF 16V C3001 EEEFK1C220R 22uF 16V C3106 ECJ1VB1C104K 0.1uF 16V C3002 ECJ1VB1H103K 0.01uF 50V C3107 ECJ1VB1C104K 0.1uF 16V...
Page 159
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C3237 ECJ2FB0J106K 10uF 6.3V C4021 ECJ1VC1H101J 100pF 50V C3241 ECJ1VB1C104K 0.1uF 16V C4022 ECJ1VC1H101J 100pF 50V C3401 ECJ1VB1C104K 0.1uF 16V C4023 ECJ1VC1H101J 100pF 50V...
Page 160
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C4104 ECA1CAK100XB 10uF 16V C4187 ECA1EAK100XB 10uF 25V C4105 ECJ1VB1H331K 330pF 50V C4188 ECA1EAK100XB 10uF 25V C4106 ECJ1VB1H331K 330pF 50V C4189 ECJ1VB1H104K 0.1uF 50V...
Page 161
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C4372 ECJ1VC1H220J 22pF 50V C5028 ECJ1VB1H104K 0.1uF 50V C4373 ECJ1VB1H104K 0.1uF 50V C5030 ECJ1VC1H221J 220pF 50V C4374 ECJ1VB1C105K 1uF 16V C5031 ECJ1VB1C224K 0.22uF 16V...
Page 162
SA-BX500PP Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C5326 F1H2A221A009 220pF 100V C5697 ECA1HAK010XB 1uF 50V C5327 ECJ1VB1H104K 0.1uF 50V C5700 F1BAF1020020 1000pF C5328 F0C1H8240001 0.82uF 50V C5701 ECQU2A104MLC 0.1uF C5331...