Platform Components; Cisco 3504 Wireless Controller Front Panel - Cisco 3504 Installation Manual

Wireless controller

Hide thumbs Also See for 3504:

Table of Contents

Overview of Cisco 3504 Wireless Controller

Platform Components

Figure 2: Cisco 3504 Wireless Controller Front Panel View

Table 2: Cisco 3504 Wireless Controller Front Panel Components

Service Port LED

Redundancy Port LED

Service Port (SP) (RJ-45) for out-of-band management

Redundancy Port (RP) (RJ-45).

The redundancy ports can be connected back to back or via an L2

Note

switch.

CPU console port, which is an RS-232 port that supports an RJ-45 connector. At boot-up, the

controller configures the RS-232 port as a console port with default settings of 9600, N, 8, 1. The

boot-loader supports baud rates of 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200. A

default baud-rate recovery mechanism is not available; however, the bootloader ensures that the

stored baud rate setting matches one of the allowed values before setting the baud rate. If a

nonstandard value is detected, the baud rate will default to 9600.

Mini-B USB console port that can be used to perform software updates in addition to the already

available transfer modes, namely HTTP, TFTP, FTP, and SFTP.

Note

If the Mini-B USB console port is used, the CPU console port that supports RJ-45 connector

is ignored. That is, only one of the two ports are ever active.

If you connect to both Mini-B USB port and the CPU console port, then the CPU console

port takes precedence.

Cisco 3504 Wireless Controller Installation Guide

Platform Components

Table of Contents

Show Quick Links

Table of Contents